|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
11-18-2005, 01:01 PM
|
#1 |
|
The Crazy Kracka
Join Date: Dec 2003
Location: San Diego, Ca
Posts: 60
|
Re: Swapping in 3/4 ton axles
The Brake components may also need to be changed, i.e. the Master Cylinder and the proportioning valve. There is a significant weight difference and clearance difference between a 12 bolt and a 14 bolt. If you don't care about that then you will be hard pressed to destroy the 3/4 ton equipment. I would do it if it were me.
__________________
My goal in life is to be as good of a person as my dog already thinks I am. 68 GMC LWB 396 BBC Camper Special 72 Chevy Blazer 4x4 with 406 SBC 73 Dodge Dart Sport with 340 |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
