Another 68 longbed for parts. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*bisquik65* · 11-18-2005, 08:09 PM

Here it is, The grille pending sale,and the bed is sold.

decent hood no rust in front lip at all,has a few dings...$75 , I may ship it,if a can find someone that will take it.
Nice trailering arms...$65 each includes shipping
Uncut dash...nice...$50 + shipping...I will cut it in front of the windshield so it can be put back spot welded under the windshield lip.

Rust free roof clip..
If you see anthing you may need ,post here...1st Thank you,Erick

4 speed non tilt column $50 includes shipping.
I will check ratio on the rear,I have 2 68 rears here.And i will cut anything you need off the longbed frame,i have 2 68 longbed frames...

The 6 cyl is parts,good head,intake and exhaust manifolds...motor mouts ect..

*rage'nrat638* · 11-18-2005, 09:42 PM

how about a tail gate to fit my 69...thanks mark

*bisquik65* · 11-18-2005, 09:45 PM

Quote:

Originally Posted by rage'nrat638

how about a tail gate to fit my 69...thanks mark

I have a few gates here,Let me look and get pics of them..Thanks,Erick
Give me the weekend to see..

*rage'nrat638* · 11-18-2005, 09:51 PM

thank you my brother...life is good....mine has a hard bow...and cracking...
thanks your pal mark...

*bisquik65* · 11-18-2005, 09:56 PM

Quote:

Originally Posted by rage'nrat638

thank you my brother...life is good....mine has a hard bow...and cracking...
thanks your pal mark...

I have parts here i have stored since 1985 or so...Man i like 67-72's And i have one here a 69 CST/10 that had 125,000 miles on it when i bought it in 1985 and it was a longbed 1/2 with air/tilt/tach/3.73 posi Then in 1993 it became a shortbed,now its a car hauler in the works..with 550,000 + miles on it ..Yes that many...Go to my user profile and you will see the purple wonder there...Thanks,Erick

**tnblazerk5** · 11-18-2005, 11:19 PM

is that the doors we were talkin about ?

70GMCer · 11-19-2005, 08:09 AM

Do you have a pair of nice chrome vent window assemblies? Need not be tinted. If so, how much and shipping to 21085? Also a picture, if you can....

thanks, steve

*bisquik65* · 11-19-2005, 11:03 AM

Quote:

Originally Posted by tnblazerk5

is that the doors we were talkin about ?

Yes the drivers door is good robb,the pass is junk...there are speaker holes cut under the door panels in both..I am pulling it apart this afternoon...Drivers door is robb's

*bisquik65* · 11-19-2005, 11:04 AM

Quote:

Originally Posted by 70GMCer

Do you have a pair of nice chrome vent window assemblies? Need not be tinted. If so, how much and shipping to 21085? Also a picture, if you can....

thanks, steve

I have a pair of chrome vent's Let get a pic of them for you,Thanks,Erick

**tnblazerk5** · 11-19-2005, 11:36 AM

what shape it that front bumper ?

70GMCer · 11-19-2005, 11:45 AM

ok, great....waiting for a pic of the vent windows.....

*bisquik65* · 11-19-2005, 06:07 PM

Quote:

Originally Posted by 70GMCer

ok, great....waiting for a pic of the vent windows.....

These are 72 blazer cst vent windows...The chrome is good...$75 for the pair,Includes the shipping to you,Very well packed so they wont get busted...

*bisquik65* · 11-19-2005, 06:10 PM

Quote:

Originally Posted by tnblazerk5

what shape it that front bumper ?

It has a few holes in it...I will need to look at it again

**tnblazerk5** · 11-19-2005, 07:21 PM

you got a pm

sr67chevyfleet · 11-19-2005, 07:22 PM

Im in need of a tailgate got one?

veedublu · 11-20-2005, 05:22 AM

Looking to convert my leaf-spring truck to coils... don't need trailing arms or axle housing but will need everything else (front trailing arm mounts, upper shock mounts, upper panhard bracket, that sort of thing). Shipped to 80907?

Thanks

John

*bisquik65* · 11-20-2005, 10:41 AM

Quote:

Originally Posted by veedublu

Looking to convert my leaf-spring truck to coils... don't need trailing arms or axle housing but will need everything else (front trailing arm mounts, upper shock mounts, upper panhard bracket, that sort of thing). Shipped to 80907?

Thanks

John

I can get you the crossmember,mounts and panhard bar...all in one box(a little heavy but) For $75 shipping included...I will cut this up for aprts,No problem...I will throw in the e-brake cable stuff too.Shock mounts..ect...I have new u-bolts here too if you need them Add $30 more...Let me know,Thanks,Erick

I will torch these but wont cut anything you will need,You may have to grind some rivits out,but i will get what you need.

*bisquik65* · 11-20-2005, 10:42 AM

Quote:

Originally Posted by sr67chevyfleet

Im in need of a tailgate got one?

I will need to look over (my reserves) And see.

*bisquik65* · 11-21-2005, 10:22 AM

Bump Ttt

meathead95 · 11-21-2005, 01:10 PM

how about a driveshaft for a 2wd blazer with a th350?

Inthuwind · 11-21-2005, 02:05 PM

is that a 12bolt posi??

*bisquik65* · 11-21-2005, 06:49 PM

Quote:

Originally Posted by Inthuwind

is that a 12bolt posi??

No posi..I had them in the past,sold out at this time...I get them from time to time..I will post when i do...

Inthuwind · 11-21-2005, 07:03 PM

ok thanks~~let me know when you come across one.

LUV2XCLR8 · 11-21-2005, 07:03 PM

Eric, Please keep your eyes open for the following in nice, but not mint condition,

67/68 Grill, trim can be missing or obliterated, just no major rust or dents

68 Fenders, both sides, prefer em to need little or no repair, yeh I know

Don't need the rad support, or hood, gonna buy a Cowl one hopefully at MSCS

Thanks in advance for any help you can give me on this, Craig

P.S. And Are you going to the Spring Maggie Valley Show

*bisquik65* · 11-21-2005, 07:26 PM

Yes i will,When is it..? I will bring the 702wd blazer and the 65 biscayne...The other blazer may not be ready in time..Thats the 70 with 69K/20 running gear under it..The one in my avatar..Look at my user profile to see my rollback porject too.

The fenders are bondo on this truck,I have another 67 coming in a few weeks and mabye a few more if we dont get snowed in

2-6 inches tonight and tomorrow..Later,Erick
You are in line on the grille if somebody backs out and when i get better pics of it here soon.

Quote:

Originally Posted by LUV2XCLR8

Eric, Please keep your eyes open for the following in nice, but not mint condition,

67/68 Grill, trim can be missing or obliterated, just no major rust or dents

68 Fenders, both sides, prefer em to need little or no repair, yeh I know

Don't need the rad support, or hood, gonna buy a Cowl one hopefully at MSCS

Thanks in advance for any help you can give me on this, Craig

P.S. And Are you going to the Spring Maggie Valley Show

11-18-2005, 08:09 PM	#1
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Another 68 longbed for parts. Here it is, The grille pending sale,and the bed is sold. decent hood no rust in front lip at all,has a few dings...$75 , I may ship it,if a can find someone that will take it. Nice trailering arms...$65 each includes shipping Uncut dash...nice...$50 + shipping...I will cut it in front of the windshield so it can be put back spot welded under the windshield lip. Rust free roof clip.. If you see anthing you may need ,post here...1st Thank you,Erick 4 speed non tilt column $50 includes shipping. I will check ratio on the rear,I have 2 68 rears here.And i will cut anything you need off the longbed frame,i have 2 68 longbed frames... The 6 cyl is parts,good head,intake and exhaust manifolds...motor mouts ect.. Attached Images Last edited by bisquik65; 11-18-2005 at 08:14 PM.

11-18-2005, 09:42 PM	#2
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: Another 68 longbed for parts. how about a tail gate to fit my 69...thanks mark

11-18-2005, 09:51 PM	#4
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: Another 68 longbed for parts. thank you my brother...life is good....mine has a hard bow...and cracking... thanks your pal mark...

11-18-2005, 11:19 PM	#6
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	Re: Another 68 longbed for parts. is that the doors we were talkin about ?

11-19-2005, 08:09 AM	#7
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Another 68 longbed for parts. Do you have a pair of nice chrome vent window assemblies? Need not be tinted. If so, how much and shipping to 21085? Also a picture, if you can.... thanks, steve __________________ 1997 GMC Sierra Ext 1965 Mustang

11-19-2005, 11:36 AM	#10
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	Re: Another 68 longbed for parts. what shape it that front bumper ?

11-19-2005, 11:45 AM	#11
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Another 68 longbed for parts. ok, great....waiting for a pic of the vent windows..... __________________ 1997 GMC Sierra Ext 1965 Mustang

11-19-2005, 07:21 PM	#14
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	Re: Another 68 longbed for parts. you got a pm

11-19-2005, 07:22 PM	#15
sr67chevyfleet Registered User Join Date: Nov 2005 Location: Blaine Wa Posts: 82	Re: Another 68 longbed for parts. Im in need of a tailgate got one?

11-20-2005, 05:22 AM	#16
veedublu Registered User Join Date: Jul 2001 Location: Colorado Springs Posts: 159	Re: Another 68 longbed for parts. Looking to convert my leaf-spring truck to coils... don't need trailing arms or axle housing but will need everything else (front trailing arm mounts, upper shock mounts, upper panhard bracket, that sort of thing). Shipped to 80907? Thanks John __________________ 1976 K20 my dad bought new - longbed stepside, just turned 50k miles

11-21-2005, 10:22 AM	#19
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Re: Another 68 longbed for parts. Bump Ttt

11-21-2005, 01:10 PM	#20
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Another 68 longbed for parts. how about a driveshaft for a 2wd blazer with a th350? __________________ 72 2wd blazer 72 swb 4x4

11-21-2005, 02:05 PM	#21
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Another 68 longbed for parts. is that a 12bolt posi?? __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

11-21-2005, 07:03 PM	#23
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Another 68 longbed for parts. ok thanks~~let me know when you come across one. __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

11-21-2005, 07:03 PM	#24
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Another 68 longbed for parts. Eric, Please keep your eyes open for the following in nice, but not mint condition, 67/68 Grill, trim can be missing or obliterated, just no major rust or dents 68 Fenders, both sides, prefer em to need little or no repair, yeh I know Don't need the rad support, or hood, gonna buy a Cowl one hopefully at MSCS Thanks in advance for any help you can give me on this, Craig P.S. And Are you going to the Spring Maggie Valley Show __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.