how bout some 3/4 ton pics - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cochino12 · 04-06-2005, 10:07 PM

Quote:

Originally Posted by TrainD5115

Hey Adam, where is the before shot? Show everybody what you did.

ha ha ok I put a before on there too

GMC71k20 · 04-09-2005, 12:09 AM

Big69C20 Toy · 04-13-2005, 03:35 PM

here's a lousy pic of my toy

**Yukon Jack** · 04-15-2005, 04:01 PM

Here is my 69 K20

I'm in the middle of finishing the interior

And it's motivation

Cethern · 04-15-2005, 08:26 PM

Heres one of my 71 GMC with 58,000 miles I have a little ways to go yet.

*Gee_Emm* · 04-15-2005, 09:55 PM

HotRodGMC68 · 10-29-2005, 08:06 AM

here's my 3/4 ton hot rod... and the pretty new No Limit Engineering "Fat Bar" 4 link with Aldan adjustable coilovers.

**special-K** · 10-30-2005, 08:30 AM

Here are some I have:
`91 Suburban

`72 CheyenneSuper(L)&`72 CustomDeluxe

`72 Sierra

75-K5 · 11-01-2005, 01:06 AM

Well they're not pretty but here they are. I don't have the '82 anymore, and the '68 is going to be the victim of my first rebuild attempt.

*wolfthing2000* · 11-22-2005, 01:44 AM

Gee Emm what is the color and paint number of your truck????

stueber68 · 11-23-2005, 02:34 PM

Well here is mine, 68 C20. Converted to a short bed for giggles, swapped out and reinforced a 1/2SWB frame rather than a cut down. 96 Vortec and 4l60E trans for the drivetrain. All of the original 3/4 ton suspension. Now need to get some bigger wheels to clear disc brakes for the front now.

toddol1971 · 11-24-2005, 10:00 AM

here's my 3/4 ton 71

demi · 11-28-2005, 03:57 PM

Here's mine

KAILUAZ · 12-07-2005, 09:39 AM

First day I brought her home, only a few changes since then.

Scottb · 12-12-2005, 04:35 PM

my baby.

04-13-2005, 03:35 PM	#28
Big69C20 Toy Livin' it up. Join Date: Nov 2001 Location: Richland, MI Posts: 2,212	here's a lousy pic of my toy Attached Images __________________ -Greg; Sold the 69 C20. It's off to a better home with more love! Now onto the 86 CUCV M1009; K5 blazer with 6.2L diesel, corp 10 bolt axles, Detroit locker in the rear, trutrac front, 3.73 gears, 35" tires.

04-15-2005, 04:01 PM	#29
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Here is my 69 K20 I'm in the middle of finishing the interior And it's motivation __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

04-15-2005, 08:26 PM	#30
Cethern What was I thinking?? Join Date: Dec 2003 Location: Commerce City Co Posts: 636	My 71 Heres one of my 71 GMC with 58,000 miles I have a little ways to go yet. Attached Images __________________ 72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit...

04-15-2005, 09:55 PM	#31
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Last edited by Gee_Emm; 04-15-2005 at 11:03 PM.

10-29-2005, 08:06 AM	#32
HotRodGMC68 Registered User Join Date: Aug 2005 Location: Albuquerque, New Mexico Posts: 32	Re: how bout some 3/4 ton pics here's my 3/4 ton hot rod... and the pretty new No Limit Engineering "Fat Bar" 4 link with Aldan adjustable coilovers. Attached Images __________________ 384 Stroker Small Block- Best ET: 13.24@103 Last edited by HotRodGMC68; 10-29-2005 at 08:08 AM.

04-09-2005, 12:09 AM	#27
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277

10-30-2005, 08:30 AM	#33
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: how bout some 3/4 ton pics Here are some I have: `91 Suburban `72 CheyenneSuper(L)&`72 CustomDeluxe `72 Sierra __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-01-2005, 01:06 AM	#34
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	Re: how bout some 3/4 ton pics Well they're not pretty but here they are. I don't have the '82 anymore, and the '68 is going to be the victim of my first rebuild attempt. Attached Images __________________ This is the project that never ends, yes it goes on and on my friend....

11-22-2005, 01:44 AM	#35
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: how bout some 3/4 ton pics Gee Emm what is the color and paint number of your truck????

11-23-2005, 02:34 PM	#36
stueber68 1968 C20 Vortec Beast Join Date: Jun 2005 Location: STILLWATER,OKLAHOMA Posts: 483	Re: how bout some 3/4 ton pics Well here is mine, 68 C20. Converted to a short bed for giggles, swapped out and reinforced a 1/2SWB frame rather than a cut down. 96 Vortec and 4l60E trans for the drivetrain. All of the original 3/4 ton suspension. Now need to get some bigger wheels to clear disc brakes for the front now. Attached Images __________________ Ugly or not it still kicks a**!

11-24-2005, 10:00 AM	#37
toddol1971 Registered User Join Date: Nov 2003 Location: plainfield il Posts: 163	Re: how bout some 3/4 ton pics here's my 3/4 ton 71 __________________ All my trucks are gone now. I'll gladly take a free one

11-28-2005, 03:57 PM	#38
demi Registered User Join Date: Sep 2003 Location: Arizona Posts: 305	Re: how bout some 3/4 ton pics Here's mine

12-07-2005, 09:39 AM	#39
KAILUAZ King of Rust Join Date: Jul 2005 Location: St Petersburg, FL Posts: 359	Re: how bout some 3/4 ton pics First day I brought her home, only a few changes since then. __________________ 1970 GMC 2500, 350, TH400, front disks, thats it! My Pics

12-12-2005, 04:35 PM	#40
Scottb Registered User Join Date: Oct 2005 Location: Reno, NV Posts: 17	Re: how bout some 3/4 ton pics my baby. __________________ 70 GMC C2500 BB 402, LSD Dana 60 rear, Converted to SM 465, Holley 750, Edelbrock Performer RPM air-gap intake, Flowtech Headers, 2.5" Flomaster Exhaust, HEI ignition, 81 Chevy disk Brakes. All work done by myself. last 1/4 mile (almost 3 years ago) 15.9 @ 86

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.