How much to get seat recovered - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*DroppedZ84* · 12-22-2005, 06:08 PM

How much have you all paid for it?

82 Silverado 4X · 12-22-2005, 07:25 PM

A guy I work with just paid $225 to have a nice blue and black velour one sewn up and installed over his original bench seat foam for his 79.

texan1186 · 12-22-2005, 08:31 PM

i had mine done this summer. all i had was the frame and he cut foam and did perforated gray cloth on gray vinyl for $300.

piecesparts · 12-22-2005, 09:04 PM

The last one I had done (Last year In Kansas) cost me $175.00 for a full bench seat in a double velour. Smooth center piece with a dappled velour on the driver and passenger sides. The work was good and the quality looks to be good also. Your prices will be higher, considering your area in the country.

*DroppedZ84* · 12-23-2005, 12:18 AM

Wow, so I'm looking at like $200? Damn, I will most likely look into swapping into a late model seat then!

jberkeley · 12-24-2005, 11:49 AM

why not do it yourself? lmc and chevy duty sell the kits... great feeling doing it yourself....good luck...

SlapFish · 12-24-2005, 12:10 PM

It's not hard. All you need, which they send, is one of those hog ring clamps and a lotta hog rings. And a good bit of patience getting those old rusty ones out if you have any.

12-22-2005, 06:08 PM	#1
DroppedZ84 Account Suspended Join Date: Sep 2005 Location: Nor*Cal Posts: 186	How much to get seat recovered How much have you all paid for it?

12-22-2005, 07:25 PM	#2
82 Silverado 4X Genuine Chevrolet Join Date: Feb 2003 Location: South West Pennsylvania. Posts: 582	Re: How much to get seat recovered A guy I work with just paid $225 to have a nice blue and black velour one sewn up and installed over his original bench seat foam for his 79. __________________ George 82 Silverado LWB 4x4 350 SM465 NP208 77 Chevrolet Blazer Chalet 400 TH350 NP203

12-22-2005, 08:31 PM	#3
texan1186 Under Major Construction Join Date: Dec 2003 Location: harker heights, tx Posts: 120	Re: How much to get seat recovered i had mine done this summer. all i had was the frame and he cut foam and did perforated gray cloth on gray vinyl for $300.

12-22-2005, 09:04 PM	#4
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: How much to get seat recovered The last one I had done (Last year In Kansas) cost me $175.00 for a full bench seat in a double velour. Smooth center piece with a dappled velour on the driver and passenger sides. The work was good and the quality looks to be good also. Your prices will be higher, considering your area in the country.

12-23-2005, 12:18 AM	#5
DroppedZ84 Account Suspended Join Date: Sep 2005 Location: Nor*Cal Posts: 186	Re: How much to get seat recovered Wow, so I'm looking at like $200? Damn, I will most likely look into swapping into a late model seat then!

12-24-2005, 11:49 AM	#6
jberkeley 86 chevy k-10 Join Date: Jun 2004 Location: nashua, nh Posts: 121	Re: How much to get seat recovered why not do it yourself? lmc and chevy duty sell the kits... great feeling doing it yourself....good luck... __________________

12-24-2005, 12:10 PM	#7
SlapFish Real Men Wear Orange Join Date: Oct 2005 Location: NC Posts: 89	Re: How much to get seat recovered It's not hard. All you need, which they send, is one of those hog ring clamps and a lotta hog rings. And a good bit of patience getting those old rusty ones out if you have any.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.