Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-25-2006, 08:43 PM | #1 |
Registered User
Join Date: Nov 2005
Location: nc
Posts: 118
|
Popping out of 4 wheel drive
Is it just an adjustment when a truck pops out of 4 wheel drive? I had the tranny replaced in my 85 and now it pops out when i put it in 4hi or lo....makes no difference. It looks like something is out of whack because to lock it into 4 hi it is almost lined up with the 4 lo selection on the console. Any help would be appreciated....
Jeremy |
01-25-2006, 08:56 PM | #2 |
Registered User
Join Date: Oct 2005
Location: northern maryland
Posts: 15
|
Re: Popping out of 4 wheel drive
Sounds like the linkage may need to be adjusted. Its a fairly simple thing to do.
__________________
|
01-26-2006, 12:29 AM | #3 |
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Re: Popping out of 4 wheel drive
Which transfercase do you have?
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
01-26-2006, 10:59 PM | #4 |
Registered User
Join Date: Nov 2005
Location: nc
Posts: 118
|
Re: Popping out of 4 wheel drive
How can I figure out which transfer case this is? Its mated to a 700R4
|
01-27-2006, 01:17 AM | #5 |
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Re: Popping out of 4 wheel drive
First question -- Full time or part time?
Second question, is there a little round cover with 3 bolts on it on the back side of the t-case between the upper and lower shafts?
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
01-27-2006, 07:23 PM | #6 |
Check out GMTrucks.org
Join Date: Sep 2003
Location: Boise, Id
Posts: 284
|
Re: Popping out of 4 wheel drive
If it is the stock case in that truck, I bet it is a np208. I think you can adjust the linkage on that one.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|