Gauging interest in possibly parting my truck!!! 77' k10

[dpmalibu]

Trying to sell the truck. It is reliable and really ashame to have to part out but have no choice. I need the room. Starting Tuesday next week I will start pulling it apart. Here is what is good on the truck:

1) Tailgate $40

2) Hood $25

3) grill $40

4) Rear bumper $ 65 (not a step bumper)

5) front bumper with bumper gaurds $50

6) Bedliner $50

7) tool box $40

8) Rear slider glass $50

9) Brand new windshield $ 140 (Paid $188)

10) good dash pad redyed black $40 (one small crack)

11) Re upholstered bench seat (black) $100

12) brand new black carpet $60

13) (4) 32x11.50x15 tires on 6 lug chrome wagon wheels lots of tread left about 75-80% $175

14) dana 44 front rear $200 / 12 bolt rear (gears either 3.42 or 3.73 have to check ) $200 Both six lug

15) NP 203 transfer case $ 175

16) T-350 trans $175

17) 350 motor $275

18) driveshafts $30 front; $40 rear

19) gas tank $40

Drivetrain parts have 103,000 miles. Truck runs really good .4WD works good. Hate to part it out but I need to get rid of one truck. I currently have 3 and 2 other cars.Located in Trenton,NJ will have pics if I definately part it out. If I get enough bites on the major parts I will part it out.

[79BIG10]

How's the shifter for the NP203? I need just the shifter.

[Lizzard27]

how much rust in the hood and front fenders and can you get pics

[Lizzard27]

where is truck located

[dpmalibu]

Read the post. The location is Trenton,NJ Fenders are not listed because they are rusted. Hood doesn't have rust that I can recall. Unless you plan on picking up the hood there is no shipping on any big parts unless they are light.

[Russell]

I'm interested in some larger parts.

First is the carpet. My truck currently doesn't have one, and I'd very much like to have one! Was the 203 converted to part time, or does the carpet have no holes for any shifters (that'd be perfect!)

Second is the floor hump. If I took this part, you'd be cutting a significant amount of the cab floor out, which would kinda make the rest of the cab fairly worthless, so I'm not sure if you'd want to. But, if you are willing to, I need the unboltable hump, plus about 2 - 3 inches around the entire thing. I intend to weld it into my K25, as it was a un-removable low hump that I had to cut out. So yeah, need 2 - 3 inches infront up the firewall, on either side, and all the way back under the seat. You should be able to see where the factory spot welded the extra hump into the floor for the transfercase as well, which is what I need more than anything.

Shipping may be the biggest concern, you being from New Jersey, so depending on the condition of the carpet, and your feelings of cutting the cab up, I may just wind up with the carpet, lol

[dpmalibu]

Sold!!!!