'66 c-10 I wanna bag... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Outkast · 06-20-2006, 04:59 PM

Hey everyone, I don't really post much on here but I have a question about my 1966 c-10 fleetside. Future project... I have a stock rolling chassis, and want to know what the best way to get as low to the ground on frame as possible.
It has a two trailing arms and a panhard bar.

I really want to build an entire frame setup to lay out all the way.

Anyway just looking for tips to a new guy on baggin my 66,

I have a custom 94 Impala on 22's also, under some construction at the moment.

Thanks

gringoloco · 06-20-2006, 05:09 PM

You won't lay in the rear with bags in the stock location without Z'ing the frame and a big notch.

The front, I believe, will accept the later model front crossmember. 1" notch, 3" spindles, bags -You're on the ground.

Over simplified, I know but there's a lot of info here if you search around a little.

bagged69c10 · 06-20-2006, 08:15 PM

I think you can lay in the back with trailing arms, just not in the stock location. But you will need blocks. In the front you will need to Z the frame. I Zd mine 3 inches but Im not finished yet. It should lay easily on 22s.

camaro__thunder · 06-20-2006, 09:15 PM

ROCKER:
2.5" drop spindles
2" drop lowers
3" Z
12" notch
3" blocks
bags on top of rearend
shorter body mounts it will kill the pinch's.
super track bar

DOOR:
same as above with 4 3/4" bodydrop
plus moved the trailing arms in and put bags in front of the notch on bars.
to lay on 22"s also added new tube uppers and lowers up front.
Watts link

Outkast · 06-21-2006, 11:58 AM

Is there any way to 4 link it?

Im new to this and want a nice low setup. Im not against buying a setup..

Where can I get the front CA's and other parts for a 66 c10?

How do you build a one off custom frame like ValleyCustoms ? Thats what I really want.

bagged69c10 · 06-21-2006, 01:02 PM

I I back halved mine and installed a ***************** super-lift triangulated 4 link and Im in the process of Zing it 3".

fastbagged68 · 06-21-2006, 02:11 PM

You can lay out on stock trailing and WITHOUT Zing your frame!!! Here are pics of my 63 suburban that lays out on stock crossmember with custom A-arms, stock trailing arms!!!!
I would recommend 4 linking it though....will make your life alot easier. Also you won't have to do a long notch to clear your trailing arms.

lvscott · 06-21-2006, 06:56 PM

i dont know from experience what it takes to get the rear on the ground. but, check out this thread http://67-72chevytrucks.com/vboard/s...d.php?t=201898 this is what i'll be using to get the front end on the ground. hope this helps

06-20-2006, 04:59 PM	#1
Outkast Registered User Join Date: Jul 2005 Location: Georgia Posts: 2	'66 c-10 I wanna bag... Hey everyone, I don't really post much on here but I have a question about my 1966 c-10 fleetside. Future project... I have a stock rolling chassis, and want to know what the best way to get as low to the ground on frame as possible. It has a two trailing arms and a panhard bar. I really want to build an entire frame setup to lay out all the way. Anyway just looking for tips to a new guy on baggin my 66, I have a custom 94 Impala on 22's also, under some construction at the moment. Thanks

06-20-2006, 05:09 PM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: '66 c-10 I wanna bag... You won't lay in the rear with bags in the stock location without Z'ing the frame and a big notch. The front, I believe, will accept the later model front crossmember. 1" notch, 3" spindles, bags -You're on the ground. Over simplified, I know but there's a lot of info here if you search around a little. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

06-20-2006, 08:15 PM	#3
bagged69c10 soon to be bagged64sub Join Date: Feb 2005 Location: DFW-currently phoenix Posts: 635	Re: '66 c-10 I wanna bag... I think you can lay in the back with trailing arms, just not in the stock location. But you will need blocks. In the front you will need to Z the frame. I Zd mine 3 inches but Im not finished yet. It should lay easily on 22s. __________________ 1969 c-10, bagged, Zd, 20" Boyds SOLD! 1964 Suburban COMING SOON Build threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=304726 1965 c-10 long bed 1993 Sierra x-cab 1999 tahoe-4/5 on 22s 2005 Chevy work truck

06-20-2006, 09:15 PM	#4
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: '66 c-10 I wanna bag... ROCKER: 2.5" drop spindles 2" drop lowers 3" Z 12" notch 3" blocks bags on top of rearend shorter body mounts it will kill the pinch's. super track bar DOOR: same as above with 4 3/4" bodydrop plus moved the trailing arms in and put bags in front of the notch on bars. to lay on 22"s also added new tube uppers and lowers up front. Watts link __________________ My Project 69 SWB SHAVED BAGGED DOORED Last edited by camaro__thunder; 06-20-2006 at 09:16 PM.

06-21-2006, 11:58 AM	#5
Outkast Registered User Join Date: Jul 2005 Location: Georgia Posts: 2	Re: '66 c-10 I wanna bag... Is there any way to 4 link it? Im new to this and want a nice low setup. Im not against buying a setup.. Where can I get the front CA's and other parts for a 66 c10? How do you build a one off custom frame like ValleyCustoms ? Thats what I really want.

06-21-2006, 01:02 PM	#6
bagged69c10 soon to be bagged64sub Join Date: Feb 2005 Location: DFW-currently phoenix Posts: 635	Re: '66 c-10 I wanna bag... I I back halved mine and installed a *************** super-lift triangulated 4 link and Im in the process of Zing it 3". __________________ 1969 c-10, bagged, Zd, 20" Boyds SOLD!** 1964 Suburban COMING SOON Build threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=304726 1965 c-10 long bed 1993 Sierra x-cab 1999 tahoe-4/5 on 22s 2005 Chevy work truck

06-21-2006, 02:11 PM	#7
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Re: '66 c-10 I wanna bag... You can lay out on stock trailing and WITHOUT Zing your frame!!! Here are pics of my 63 suburban that lays out on stock crossmember with custom A-arms, stock trailing arms!!!! I would recommend 4 linking it though....will make your life alot easier. Also you won't have to do a long notch to clear your trailing arms. Attached Images

06-21-2006, 06:56 PM	#8
lvscott Registered User Join Date: Mar 2005 Location: Las Vegas, NV Posts: 84	Re: '66 c-10 I wanna bag... i dont know from experience what it takes to get the rear on the ground. but, check out this thread http://67-72chevytrucks.com/vboard/s...d.php?t=201898 this is what i'll be using to get the front end on the ground. hope this helps

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.