Caliper issue? Help Please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**AspecialZ** · 08-24-2006, 09:58 PM

Can anyone tell me what this Caliper is from. I was told a 75 1/2 ton, however I cannot find any hoses or a truck that has this type. Thanks in advance!

87 STEPPER · 08-25-2006, 07:20 AM

From what i can see they look like whats on my truck of corse that dosen't mean that there the same.

My truck has the heavy duty brakes on it. And maybe the lines for the HD calipers are differant as well i dont know.

GOOD LUCK.

**AspecialZ** · 08-30-2006, 10:13 PM

Anyone else??? If I post the numbers would it help?? I need to get these back on my truck. thanks!

boxrodz · 08-31-2006, 02:43 PM

A...Z
I had a similar problem when I changed out my calipers and brakes hoses. I purchased the calipers and brakes hoses ahead of time. But, once I had everything disassembled, I realized the hoses and calipers didn't match. I ended up going to various autoparts stores with my stock parts to find a match. I ended up with different sets of hoses and calipers from the different stores and was able to match the pieces. Once I had everything together, I returned the unused parts.

If I get a chance, I'll check out my configuration...

08-24-2006, 09:58 PM	#1
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	Caliper issue? Help Please Can anyone tell me what this Caliper is from. I was told a 75 1/2 ton, however I cannot find any hoses or a truck that has this type. Thanks in advance! Attached Images __________________ Follow me on Instagram @ hot_rod_shop

08-25-2006, 07:20 AM	#2
87 STEPPER STILL PLAYS WITH TRUX Join Date: Nov 2002 Location: Melbourne, Fla. Posts: 2,764	Re: Caliper issue? Help Please From what i can see they look like whats on my truck of corse that dosen't mean that there the same. My truck has the heavy duty brakes on it. And maybe the lines for the HD calipers are differant as well i dont know. GOOD LUCK. __________________ ~~Bruce~~ MY 87 STEPPER MY 99 2D/WD TAHOE

08-30-2006, 10:13 PM	#3
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	Re: Caliper issue? Help Please Anyone else??? If I post the numbers would it help?? I need to get these back on my truck. thanks! __________________ Follow me on Instagram @ hot_rod_shop

08-31-2006, 02:43 PM	#4
boxrodz Until Seventy Times Seven Join Date: Feb 2005 Location: Rocky Mountain Front Range Posts: 1,301	Re: Caliper issue? Help Please A...Z I had a similar problem when I changed out my calipers and brakes hoses. I purchased the calipers and brakes hoses ahead of time. But, once I had everything disassembled, I realized the hoses and calipers didn't match. I ended up going to various autoparts stores with my stock parts to find a match. I ended up with different sets of hoses and calipers from the different stores and was able to match the pieces. Once I had everything together, I returned the unused parts. If I get a chance, I'll check out my configuration... __________________ boxRODz 1983 C10 SWB Fleetside When two halves is gone, there's nuthin left. Two nothings is nuthin. That's mathematics son. You can argue with me but you can't argue with figures. Two half nothings is a whole nuthin...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.