|
10-12-2006, 01:32 PM
|
#1 |
|
Junior Member
Join Date: Jun 2006
Location: Frisco Tx
Posts: 311
|
Steel tubing cost?
I was just quoted $574 from metalsupermarkets for 3 peices of 20' 2x4 3/16" tubing. That's about $191 each. Does that sound right? I have never bought this type of metal before, so I have no idea. I'm building a full frame for my 68 if your wondering...
|
|
|
|
10-12-2006, 01:53 PM
|
#2 |
|
Senior Member
 
Join Date: Aug 2006
Location: Atascadero, CA
Posts: 1,152
|
Re: Steel tubing cost?
When i bought some 2x4 3/16 it was $100-121 a 20' stick. I don't remember exactly but that sounds high. Also is there a reason why you want to use 3/16. I have spoken to a few different shops that build there own custom frames and they all recommend using 1/8 and then gusseting where the pieces of metal meet. I know this is a controversy subject because i asked this question on this thread a while ago. I have a thread in the 67-72 general section and i am building my own frame. You should check it out. I went with 1/8 tube an i am planing on gusseting all the connections. 3/16 is really heavy and after you have messed around with it i think you would agree that it is overkill. Make sure when you weld 2 pieces together that you "V" the metal so when you weld you weld both sides of the steel. I hope that makes sence. If not let me know and i can take some pics for you. Sorry for the long paragraph!
Good Luck Josh
__________________
(Project truck) 1970 C10 under complete transformation  My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold |
|
|
|
|
10-12-2006, 02:47 PM
|
#3 |
|
Junior Member
Join Date: Jun 2006
Location: Frisco Tx
Posts: 311
|
Re: Steel tubing cost?
I just physically looked at the difference in 1/8 and 3/16 and I know exactly what your saying. 3/16" seems like overkill. I think 1/8 is plenty with good welds and gussets. What did you pay for your 1/8?
|
|
|
|
|
10-12-2006, 05:03 PM
|
#4 |
|
Senior Member
Join Date: Aug 2006
Location: Atascadero, CA
Posts: 1,152
|
Re: Steel tubing cost?
I think i payed $62 or so for 20' of 1/8". I know for sure though that it is in the $60-69 dollars. If you have any questions let me know!
__________________
(Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold |
|
|
|
|
10-12-2006, 05:04 PM
|
#5 |
|
Rottenwood Garage Member
Join Date: May 2005
Location: Marietta, Georgia
Posts: 4,321
|
Re: Steel tubing cost?
The price of steel has gone up 65 to 75% over the past 2 years.
|
|
|
|
|
10-12-2006, 08:47 PM
|
#6 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: Steel tubing cost?
yep
|
|
|
|
|
10-13-2006, 12:20 AM
|
#7 |
|
Registered User
Join Date: Mar 2005
Location: Las Vegas, NV
Posts: 84
|
Re: Steel tubing cost?
I just bought a 20' stick of 2 x4 3/16 for 96.00 and things get real pricy put here in sin city. don't know if this helps.
|
|
|
|
|
10-13-2006, 12:13 PM
|
#8 | |
|
Junior Member
Join Date: Jun 2006
Location: Frisco Tx
Posts: 311
|
Re: Steel tubing cost?
Quote:
|
|
|
|
|
|
10-13-2006, 10:54 PM
|
#9 |
|
Registered User
Join Date: Dec 2004
Location: El paso, Tx.
Posts: 428
|
Re: Steel tubing cost?
That's whats cool about being so close to the border(Mexico) i buy all my metal over there, machine work and parts. They end up costing 1/2 the price.
__________________
1969 Chevy C-10 350/700r4 |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
