![]() |
![]() |
#1 |
Registered User
Join Date: Jun 2006
Location: Maryland
Posts: 4
|
brakes
can anyone tell all of the parts i would need to do a front disk brake conversion on a 1962 gmc 2 wheel drive 3/4 ton pickup. also if there is a late model truck i can get them from. thanks
|
![]() |
![]() |
![]() |
#2 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Re: brakes
I'm not too sure on if the frames are the same, but on the 67+ trucks the front crossmembers from 71+ trucks will bolt in place, giving you updated brakes and suspension. Then you just need to replace the booster/master cylinder and plumb it up. You just need to find out if the frames are close enough for it to work for you.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. ![]() We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Dec 1999
Location: Knightstown, in, usa
Posts: 2,525
|
Re: brakes
You can do a complete front crossmember swap easier and cheaper than buying the parts singular. Just stay with 3/4 ton, and stay 1987 & below.
__________________
1970 long fleet, 355 4 speed, primer, walnut goodies |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|