What SBC cams are people running??

[piecesparts]

Running a Comp Cams Roller cam #XR264HR and Comp Magnum roller rockers in a 383 stroker, 9.5 to 1 ratio motor. The cam is set at 107 degrees. It is tied through a 2400 stall converter / 700R4 tranny to a 3.73 Posi, 12 bolt rear end. Ever since I installed the stall converter, the truck pulls hard from 2000 to 4500 and sounds good. The heads are not aluminum, but are cast Dart II Sportsmen, connected to a dual 2 1/2" exhaust system with long tube headers and flowmasters.