|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
01-02-2007, 12:47 AM
|
#1 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,133
|
Re: front springs on 86 c10 question
If the spring is stock height, it might still be under a lot of pressure & want to 'pop' out. This can be potentially dangerous.
A simple trick to keep this from happening is to wrap something (rope, strap, wire, chain) around 1 of the coils before releasing the tension on the spring. If it wants to pop out, you have a tether on it keeping it under control.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
