FYI: Factory Topless Blazer Side Door Window Opening Caps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

badpeanut · 02-11-2007, 11:27 PM

I found this pair at a semi-local GM dealer (this is not the same set that was on eBay recently). I was told these parts were discontinued in 1983. Part numbers are as follows:

Driver's Side: 3962531
Passenger's Side: 3962532

They are both gray fiberglass (I don't know why the driver's side is black on top). To use them as is requires cutting the entire door frame off. If a person wanted to retain the vent window, these door window opening caps could be trimmed accordingly.

I sacrificed an old door with issues to take the pictures due to these requests:

Enjoy!

badpeanut · 02-11-2007, 11:28 PM

Factory Assembly Manual:

centsless · 02-11-2007, 11:29 PM

That is Cool!!

krue · 02-11-2007, 11:51 PM

Remind me to put this in FAQ after everyone sees it.

**jerry moss** · 02-12-2007, 12:16 AM

good piece of info, Bad Peanut

Longhorn Man · 02-12-2007, 12:23 AM

do you happen to have a hi-res scan of that article? I'd like to print that out in full size.

cstanley · 02-12-2007, 12:49 AM

that's cool. the funny part is that you'd think they'd get rid of the door lock

!

badpeanut · 02-12-2007, 08:38 AM

Quote:

Originally Posted by Longhorn Man

do you happen to have a hi-res scan of that article? I'd like to print that out in full size.

I can provide hi-res of all pictures except that one which I borrowed from a previous thread by board member raggedjim.

LUV2XCLR8 · 02-14-2007, 04:21 PM

I need those

65-72 chevytoys · 02-14-2007, 06:14 PM

Quote:

Originally Posted by krue

Remind me to put this in FAQ after everyone sees it.

Hey krue put those in the FAQ.

DennyB · 02-14-2007, 07:47 PM

Moved to the blazer/jimmy board for you.

**raggedjim** · 02-19-2007, 11:37 AM

I'll see if I can get a better scan on the article...

Rg

badpeanut · 02-24-2007, 09:07 PM

Quote:

Originally Posted by raggedjim

I'll see if I can get a better scan on the article...

Rg

Any luck?

**raggedjim** · 02-27-2007, 11:17 AM

I'm sorry. I'm having a new roof put on my house and everything that was in the attic is now in my computer room!

Once I find the article I WILL scan it, but so far I haven't found it...

Rg

**raggedjim** · 02-28-2007, 02:31 PM

Hope this works...

Notice the door caps, no window cranks, and no vent window frame.

Also weird is the bench seat and the wide wheels... I wonder if this one is a prototype...

Rg

65-72 chevytoys · 02-28-2007, 05:50 PM

Hey there is a cool idea. For the trucks remove the gas tank from inside the cab and mount a spare. Well I guess if there is room and you could get it in and out from behind the seat.

Oh well I guess not such a good idea afterall.

02-11-2007, 11:27 PM	#1
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	FYI: Factory Topless Blazer Side Door Window Opening Caps I found this pair at a semi-local GM dealer (this is not the same set that was on eBay recently). I was told these parts were discontinued in 1983. Part numbers are as follows: Driver's Side: 3962531 Passenger's Side: 3962532 They are both gray fiberglass (I don't know why the driver's side is black on top). To use them as is requires cutting the entire door frame off. If a person wanted to retain the vent window, these door window opening caps could be trimmed accordingly. I sacrificed an old door with issues to take the pictures due to these requests: http://67-72chevytrucks.com/vboard/s...d.php?t=222393 http://67-72chevytrucks.com/vboard/s...d.php?t=222744 Enjoy! Attached Images

02-11-2007, 11:28 PM	#2
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	Re: FYI: Factory Topless Blazer Side Door Window Opening Caps Factory Assembly Manual: Attached Images Last edited by badpeanut; 02-11-2007 at 11:29 PM.

02-11-2007, 11:29 PM	#3
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: FYI: Factory Topless Blazer Side Door Window Opening Caps That is Cool!! __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

02-11-2007, 11:51 PM	#4
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: FYI: Factory Topless Blazer Side Door Window Opening Caps Remind me to put this in FAQ after everyone sees it. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

02-12-2007, 12:16 AM	#5
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,940	Re: FYI: Factory Topless Blazer Side Door Window Opening Caps good piece of info, Bad Peanut __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-12-2007, 12:23 AM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: FYI: Factory Topless Blazer Side Door Window Opening Caps do you happen to have a hi-res scan of that article? I'd like to print that out in full size.

02-12-2007, 12:49 AM	#7
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Re: FYI: Factory Topless Blazer Side Door Window Opening Caps that's cool. the funny part is that you'd think they'd get rid of the door lock ! __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/

02-14-2007, 04:21 PM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: FYI: Factory Topless Blazer Side Door Window Opening Caps I need those __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-14-2007, 07:47 PM	#11
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: FYI: Factory Topless Blazer Side Door Window Opening Caps Moved to the blazer/jimmy board for you. __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

02-19-2007, 11:37 AM	#12
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,485	Re: FYI: Factory Topless Blazer Side Door Window Opening Caps I'll see if I can get a better scan on the article... Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

02-27-2007, 11:17 AM	#14
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,485	Re: FYI: Factory Topless Blazer Side Door Window Opening Caps I'm sorry. I'm having a new roof put on my house and everything that was in the attic is now in my computer room! Once I find the article I WILL scan it, but so far I haven't found it... Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

02-28-2007, 02:31 PM	#15
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,485	Re: FYI: Factory Topless Blazer Side Door Window Opening Caps Hope this works... Notice the door caps, no window cranks, and no vent window frame. Also weird is the bench seat and the wide wheels... I wonder if this one is a prototype... Rg Attached Images __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743 Last edited by raggedjim; 02-28-2007 at 02:37 PM.

02-28-2007, 05:50 PM	#16
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: FYI: Factory Topless Blazer Side Door Window Opening Caps Hey there is a cool idea. For the trucks remove the gas tank from inside the cab and mount a spare. Well I guess if there is room and you could get it in and out from behind the seat. Oh well I guess not such a good idea afterall. __________________ 2004 Chevy Silverado 1500LS SWB 5.3L 2004 Corvette Z16 #770 Wish I had not sold 72 blazer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.