Rear end swap in phoenix - The 1947 - Present Chevrolet & GMC Truck Message Board Network

firstgencamaros · 11-23-2002, 01:54 AM

Looking to swap my 4.10 non posi coil spring rear end for a 3.08 posi or non-posi rear for 2wd coil spring truck. Mine is in a 68. It is 6 lug and would need a 6 lug in return or be able to swap axles. Looking to do a even swap from someone local (phoenix area). My rear is a good daily driven rear with no known problems and expect the same in return. E-mail me for info firstgencamaros@aol.com
Thanks,

firstgencamaros · 11-24-2002, 12:51 AM

Any takers?

hjalbert · 11-24-2002, 05:01 AM

im not swapping anything, but ill sell you a 373 for $125 and i will let you use my drive way and air compressor to do it
(its 5 lug) any way, figured id offer, its a good clean rear end, hell for an extra 50 bucks you can have the whole frame

**Desert Rat** · 11-24-2002, 04:44 PM

I take it you dont want the 3.08 posi you were going to come down Thursday and get,thats ok i had other intrest in it for the $200.Please atleast let people know when they dig something out,so they arent holding things and saying they are spoken for.Good luck on your project.

firstgencamaros · 11-24-2002, 08:03 PM

Well, if you would respond to e-mails maybe i wouldn't think I had been blown off. The e-mail was for "last" thursday that you never responded to. I am still interested in the rear if you have it. you just need to stay in contact with people. I gave you my phone number every time I e-mailed you. All you had to do is call and we could of set up a time. If you still have it, I still want it fot the price we discussed. Let me know. You have my number.
Jason

**Desert Rat** · 11-25-2002, 12:54 AM

Uhm did you smack your head?your last email that i responded to said youd be able to come out Thursday and would call me and 7:30 was a time-why should i call you,did you need a reminder?anyhow,so i cleared out the shed,my wife helped me load it into my truck and unload it into garage put so you could see it in the light,the whole time i had the phone waiting for the phone call,i pulled the cover had it on jackstands in the garage ready for your inspection about 8:30 my wife said i dont think hes gonna call,so i chalked it up as one more person as a no show(the reason i dont like to deal with people coming out to buy stuff)waste most of the time waiting for nobody to show or even a call to say sorry i cant make it woulda been better than nothing,soI wanted $250 but i think after spending a hour moving BB heads,manifolds and blocks to get it out of the shed $350 would be a good hassle tax.But i wont wait for a phone call just call when you get into town,if not its no biggie to me,i had several people willing to check it out for $250,nevermind all together ill just sell it elsewhere.Anyone else?for the others that inquired after him its available in the garage on stands ready for inspection.

firstgencamaros · 11-25-2002, 02:44 AM

I think you hit your head. First, how would I call you. You never gave me your number or directios to your house. You must have me confused with someone else. Keep it. Everyone beware! This guys a flake!

lovechevytrucks · 11-25-2002, 05:50 AM

Hey Desert Rat! You've got mail!

**Desert Rat** · 11-25-2002, 01:09 PM

you have mail!

11-23-2002, 01:54 AM	#1
firstgencamaros Registered User Join Date: Sep 2002 Location: Gilbert, AZ Posts: 151	Rear end swap in phoenix Looking to swap my 4.10 non posi coil spring rear end for a 3.08 posi or non-posi rear for 2wd coil spring truck. Mine is in a 68. It is 6 lug and would need a 6 lug in return or be able to swap axles. Looking to do a even swap from someone local (phoenix area). My rear is a good daily driven rear with no known problems and expect the same in return. E-mail me for info firstgencamaros@aol.com Thanks, __________________ FGC

11-24-2002, 12:51 AM	#2
firstgencamaros Registered User Join Date: Sep 2002 Location: Gilbert, AZ Posts: 151	Any takers? __________________ FGC

11-24-2002, 05:01 AM	#3
hjalbert cracker Join Date: Sep 2001 Location: Wilmington, NC Posts: 1,021	im not swapping anything, but ill sell you a 373 for $125 and i will let you use my drive way and air compressor to do it (its 5 lug) any way, figured id offer, its a good clean rear end, hell for an extra 50 bucks you can have the whole frame __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Harry John Albert III located in Phoenix, AZ 1972 GMC JIMMY, 1969 lwb Chevy Frame, 1999 bmw k1200 ltc 1992 Kawasaki concours 1991 bmw k75 1973 cortez motorhome

11-24-2002, 08:03 PM	#5
firstgencamaros Registered User Join Date: Sep 2002 Location: Gilbert, AZ Posts: 151	Well, if you would respond to e-mails maybe i wouldn't think I had been blown off. The e-mail was for "last" thursday that you never responded to. I am still interested in the rear if you have it. you just need to stay in contact with people. I gave you my phone number every time I e-mailed you. All you had to do is call and we could of set up a time. If you still have it, I still want it fot the price we discussed. Let me know. You have my number. Jason __________________ FGC

11-25-2002, 02:44 AM	#7
firstgencamaros Registered User Join Date: Sep 2002 Location: Gilbert, AZ Posts: 151	I think you hit your head. First, how would I call you. You never gave me your number or directios to your house. You must have me confused with someone else. Keep it. Everyone beware! This guys a flake! __________________ FGC

11-24-2002, 04:44 PM	#4
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	I take it you dont want the 3.08 posi you were going to come down Thursday and get,thats ok i had other intrest in it for the $200.Please atleast let people know when they dig something out,so they arent holding things and saying they are spoken for.Good luck on your project.

11-25-2002, 12:54 AM	#6
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Uhm did you smack your head?your last email that i responded to said youd be able to come out Thursday and would call me and 7:30 was a time-why should i call you,did you need a reminder?anyhow,so i cleared out the shed,my wife helped me load it into my truck and unload it into garage put so you could see it in the light,the whole time i had the phone waiting for the phone call,i pulled the cover had it on jackstands in the garage ready for your inspection about 8:30 my wife said i dont think hes gonna call,so i chalked it up as one more person as a no show(the reason i dont like to deal with people coming out to buy stuff)waste most of the time waiting for nobody to show or even a call to say sorry i cant make it woulda been better than nothing,soI wanted $250 but i think after spending a hour moving BB heads,manifolds and blocks to get it out of the shed $350 would be a good hassle tax.But i wont wait for a phone call just call when you get into town,if not its no biggie to me,i had several people willing to check it out for $250,nevermind all together ill just sell it elsewhere.Anyone else?for the others that inquired after him its available in the garage on stands ready for inspection.

11-25-2002, 05:50 AM	#8
lovechevytrucks Registered User Join Date: Nov 2002 Location: Gilbert, AZ Posts: 20	Hey Desert Rat! You've got mail! __________________ FGC

11-25-2002, 01:09 PM	#9
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	you have mail!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.