as low as i can go with my project truck... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chops_by_Chase · 03-28-2007, 04:56 PM

We got a little sunny weather here in indiana and i finally got my truck out to shoot some pics. Right now this is as low as i can go with out cutting more. I have our ART front tubular arms with 2.5 spindles, and the tubular rear trailing arm kit with c-notches. I raised the bed floor about 3" and I took out the front inner fenders. The wide whites are about 31" overall diameter. I think it needs to look lower, but I want to maintain its use as a 'truck to haul my bikes. do i go lower...dropmember and a larger notch... or should I finish putting it together and drive it... choices choices.

anyway here is some eye candy

1LoC10 · 03-28-2007, 05:03 PM

I think it looks sweet as is... id drive it for the season, then drop member it in the winter

jimmydean · 03-28-2007, 05:21 PM

I agree, looks great as is. Drive it for a while until you get bored and then go lower.

7deuce · 03-28-2007, 07:38 PM

Roll that Bad Boy!

powell72 · 03-28-2007, 08:16 PM

It's got a good hot rod stance, goes with the rolling stock. Drive it.

smashingchuck · 03-28-2007, 08:29 PM

laying out is over rated. drive it! looks awesome as is!

PBFAB.COM · 03-28-2007, 10:16 PM

You already know my answer!

SCOTI · 03-28-2007, 11:16 PM

I like it as is but it would actually be more driveable & useable as a truck w/the Dropmember which..... would also get you lower. Sounds like a win/win to me

.

**N2TRUX** · 03-29-2007, 12:31 AM

Drive till Nathan gets your Dropmember ready than slam it some mo....

RACINJASON22 · 03-29-2007, 02:19 AM

I agree with 1LoC10

Quote:

I think it looks sweet as is... id drive it for the season, then drop member it in the winter

Chops_by_Chase · 03-29-2007, 09:57 AM

I guess its far enough along to put together for a summer cruiser and then I will probably tear it back down when it gets cold again. I'll have to hit nathan up for that drop member.

Chops_by_Chase · 03-29-2007, 10:06 AM

all of the pictures are at full deflate of the bags. that is where I would like to drive it....
on second thought I may just go ahead and do the dropmember and modify the rear so that the pictured height is drive height. Its far enough along to put together, but it is also tore down enough to finish some more fab work.

I think everyone gets in this situation... where do you stop? I could have been driving it months ago if i would have just bagged it, but who wants to stop at that.

lowrollin70gmc · 03-29-2007, 10:18 AM

It will look awesome no matter where it sits. I hear ya on the drive height, I have the same problem, I look all weird driving, but cool parked.

jimmydean · 03-29-2007, 12:23 PM

Quote:

Originally Posted by Chops_by_Chase

all of the pictures are at full deflate of the bags. that is where I would like to drive it....
on second thought I may just go ahead and do the dropmember and modify the rear so that the pictured height is drive height. Its far enough along to put together, but it is also tore down enough to finish some more fab work.

I think everyone gets in this situation... where do you stop? I could have been driving it months ago if i would have just bagged it, but who wants to stop at that.

I "thought" I was done until I started looking at Nate's C4 crap. That's when I stopped what I was doing on it now and started saving. Now it's just a question of getting another frame and built it there, or tear apart my truck and do everything to my existing frame.

98L150 · 03-29-2007, 12:29 PM

Looks good, I would drive it. I wish my 64 was that far along maybe in a few months.

XXL · 03-29-2007, 01:16 PM

Quote:

Originally Posted by Chops_by_Chase

do i go lower...dropmember and a larger notch... or should I finish putting it together and drive it... choices choices.

Drop that body on an oil rig frame and put some 48" tires under it! Wait... uh...

Chops_by_Chase · 03-29-2007, 02:54 PM

Quote:

Originally Posted by XXL

Drop that body on an oil rig frame and put some 48" tires under it! Wait... uh...

I wish i would have thought of that. 48s on order...Being from Indiana I decided to to go with a combine frame though. I'll post more pics when I get her cutting corn

Joe67 · 03-29-2007, 03:08 PM

I really like that truck

Jaredm82 · 03-29-2007, 03:57 PM

Trust me, put it together and drive it for a while at least! If you keep going now the list will never end of what you want to do to the truck and you will loose sight and interest in what you are doing. Take it in moderations and get some pleasure out of driving it the way it is now.

OldCreek · 03-29-2007, 04:27 PM

Wow! Looks great! Nice big window!

How can you resist driving it around right now!!!

Chops_by_Chase · 03-29-2007, 04:29 PM

Quote:

Originally Posted by Jaredm82

Trust me, put it together and drive it for a while at least! If you keep going now the list will never end of what you want to do to the truck and you will loose sight and interest in what you are doing. Take it in moderations and get some pleasure out of driving it the way it is now.

I think if i can get the dropmember i will go ahead and put it in and drive it while i do the rest. that way i am not doing work twice. i saw your truck in your avatar, do you have any pics from inside your bed?

Chops_by_Chase · 03-29-2007, 04:31 PM

Quote:

Originally Posted by OldCreek

Wow! Looks great! Nice big window!

How can you resist driving it around right now!!!

i just have to get rid of that sliding glass. I also pulled the motor and trans but I have new stuff ready to go in, i just need a couple of free weekends to do it

Big H · 03-29-2007, 07:07 PM

The fact that you are asking everyone on the board if you should go lower already answers your own question. You mentioned that you wanted to drive at the height the truck is dumped now. Go ahead and cut it the rest of the way now and put a big ol' smile on your face.

Jaredm82 · 03-30-2007, 01:42 AM

pictures of the rear of mytruck in this thread... http://67-72chevytrucks.com/vboard/s...d.php?t=227641

1LoC10 · 04-13-2007, 09:53 PM

do you have any pics of the tubular rear trailing arm kit installed... only pics on the site are not on a truck

03-28-2007, 04:56 PM	#1
Chops_by_Chase Registered User Join Date: Nov 2006 Location: Indiana Posts: 98	as low as i can go with my project truck... We got a little sunny weather here in indiana and i finally got my truck out to shoot some pics. Right now this is as low as i can go with out cutting more. I have our ART front tubular arms with 2.5 spindles, and the tubular rear trailing arm kit with c-notches. I raised the bed floor about 3" and I took out the front inner fenders. The wide whites are about 31" overall diameter. I think it needs to look lower, but I want to maintain its use as a 'truck to haul my bikes. do i go lower...dropmember and a larger notch... or should I finish putting it together and drive it... choices choices. anyway here is some eye candy Attached Images

03-28-2007, 05:03 PM	#2
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: as low as i can go with my project truck... I think it looks sweet as is... id drive it for the season, then drop member it in the winter __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-28-2007, 05:21 PM	#3
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: as low as i can go with my project truck... I agree, looks great as is. Drive it for a while until you get bored and then go lower. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

03-28-2007, 07:38 PM	#4
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: as low as i can go with my project truck... Roll that Bad Boy!

03-28-2007, 08:16 PM	#5
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: as low as i can go with my project truck... It's got a good hot rod stance, goes with the rolling stock. Drive it. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

03-28-2007, 08:29 PM	#6
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: as low as i can go with my project truck... laying out is over rated. drive it! looks awesome as is! __________________ 78 Build Thread 4Runner Build

03-28-2007, 10:16 PM	#7
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: as low as i can go with my project truck... You already know my answer! __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

03-28-2007, 11:16 PM	#8
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: as low as i can go with my project truck... I like it as is but it would actually be more driveable & useable as a truck w/the Dropmember which..... would also get you lower. Sounds like a win/win to me . __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-29-2007, 12:31 AM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: as low as i can go with my project truck... Drive till Nathan gets your Dropmember ready than slam it some mo.... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

03-29-2007, 09:57 AM	#11
Chops_by_Chase Registered User Join Date: Nov 2006 Location: Indiana Posts: 98	Re: as low as i can go with my project truck... I guess its far enough along to put together for a summer cruiser and then I will probably tear it back down when it gets cold again. I'll have to hit nathan up for that drop member.

03-29-2007, 10:06 AM	#12
Chops_by_Chase Registered User Join Date: Nov 2006 Location: Indiana Posts: 98	Re: as low as i can go with my project truck... all of the pictures are at full deflate of the bags. that is where I would like to drive it.... on second thought I may just go ahead and do the dropmember and modify the rear so that the pictured height is drive height. Its far enough along to put together, but it is also tore down enough to finish some more fab work. I think everyone gets in this situation... where do you stop? I could have been driving it months ago if i would have just bagged it, but who wants to stop at that.

03-29-2007, 10:18 AM	#13
lowrollin70gmc Too many projects Join Date: Mar 2004 Location: Fargo, ND land of the flat hills Posts: 1,147	Re: as low as i can go with my project truck... It will look awesome no matter where it sits. I hear ya on the drive height, I have the same problem, I look all weird driving, but cool parked. __________________ Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" 70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc 68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac" 63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car" 53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon” 30 Model A 16 Focus ST

03-29-2007, 12:29 PM	#15
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: as low as i can go with my project truck... Looks good, I would drive it. I wish my 64 was that far along maybe in a few months. __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

03-29-2007, 03:08 PM	#18
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Re: as low as i can go with my project truck... I really like that truck __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

03-29-2007, 03:57 PM	#19
Jaredm82 Active Member Join Date: Jul 2005 Location: Ca Posts: 211	Re: as low as i can go with my project truck... Trust me, put it together and drive it for a while at least! If you keep going now the list will never end of what you want to do to the truck and you will loose sight and interest in what you are doing. Take it in moderations and get some pleasure out of driving it the way it is now. Last edited by Jaredm82; 03-29-2007 at 03:58 PM.



Register or Log In To remove these advertisements.

03-29-2007, 04:27 PM	#20
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: as low as i can go with my project truck... Wow! Looks great! Nice big window! How can you resist driving it around right now!!! __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

03-29-2007, 07:07 PM	#23
Big H Registered User Join Date: Nov 2006 Location: South OC, CA Posts: 47	Re: as low as i can go with my project truck... The fact that you are asking everyone on the board if you should go lower already answers your own question. You mentioned that you wanted to drive at the height the truck is dumped now. Go ahead and cut it the rest of the way now and put a big ol' smile on your face. __________________ Cleverly disguised as a responsible adult...

03-30-2007, 01:42 AM	#24
Jaredm82 Active Member Join Date: Jul 2005 Location: Ca Posts: 211	Re: as low as i can go with my project truck... pictures of the rear of mytruck in this thread... http://67-72chevytrucks.com/vboard/s...d.php?t=227641

04-13-2007, 09:53 PM	#25
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: as low as i can go with my project truck... do you have any pics of the tubular rear trailing arm kit installed... only pics on the site are not on a truck __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.