Eastwoods High Temp Grey - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JimKshortstep4x4 · 04-04-2007, 08:22 PM

We used Eastwoods manifold paint on exhaust manifolds back in the mid nineties that still looks good. Starting in about 2000 there appeared to be a formulation change and the paint has not lasted for over (3) months after the change. At the time we were having trouble, I called Eastwood to complain and was told the new paint was improved over the old paint that we had been very happy with. I was told also, that I was applying it incorrectly.

We switched to the POR manifold paint in 2003 and have been very happy with it.

Jim

04-04-2007, 08:22 PM	#1
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Eastwoods High Temp Grey We used Eastwoods manifold paint on exhaust manifolds back in the mid nineties that still looks good. Starting in about 2000 there appeared to be a formulation change and the paint has not lasted for over (3) months after the change. At the time we were having trouble, I called Eastwood to complain and was told the new paint was improved over the old paint that we had been very happy with. I was told also, that I was applying it incorrectly. We switched to the POR manifold paint in 2003 and have been very happy with it. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.