Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-05-2007, 09:08 PM | #1 |
OBS guy
Join Date: Jun 2004
Location: SoCal
Posts: 1,060
|
Dang! I am gonna have to unlift my ride!
First time in my life... I am moving officially soon, and without 'unlifting' there is no way the Burb is getting in the garage. I was planning on selling it, but I am not sure. Pittsburgh is not a place to keep the burb outside in the winter, and I don't want to have to warm it up and freeze my cobbles off brushing the snow off in subzero temps. I am gonna miss my 10' garage.
I will have to go down to 4" and 35s from 6" and 37s. I will probably get Tuff Country front/rear springs and some Nitto Terra Grapplers. Another thing I am bummed about is, my Bilstein's might be too long for 4"... I dunno, what do you guys think? 4" + 35's, shocks and AC compressor for around $2k (resell 6" springs/blocks and 37s to recoup some) or screw it, sell it and get a car payment again on something newer and smaller?
__________________
88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more |
04-05-2007, 09:14 PM | #2 |
Gentleman Jim Driver
Join Date: Nov 2002
Location: Poulsbo, WA
Posts: 1,553
|
Re: Dang! I am gonna have to unlift my ride!
I'd say stay in Utah. I'm a much bigger fan of the West...
__________________
Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed |
04-05-2007, 09:15 PM | #3 |
The Crazy Machanic
Join Date: Jan 2007
Location: Nokesville Va
Posts: 1,437
|
Re: Dang! I am gonna have to unlift my ride!
i say build a bigger garage. or cover the truck and but a block heater in it.
__________________
*1986 Sliverado longbed 400 small block mean as hell, 700r4 trans (5 speed coming one day) * 1970 chevelle 2dr sedan Latest update June 24 2007. *1957 4 door stationwagon - pink all original needing a good restore (body great, floors bad) newest additions 1965 shortbed fleet great granddads. Been told im nuts to bring it back from the dead (still going to happen) plans-all stock with a turbo 292 inline 3 speed column shift. and thats it big block 427 and 5 speed trans and ford 9 inch theyhave no home yet thinking what to put them in and a 79 c60 trash truck um no idea i have one |
04-05-2007, 09:56 PM | #4 |
Dark Heart Motorsports
Join Date: Apr 2007
Location: 29404 DKFX
Posts: 683
|
Re: Dang! I am gonna have to unlift my ride!
you can always make a garage bigger vertically
__________________
How Deep Can YOU Bleed..? 1985 Chevy Blazer K5- 6.2 N/A, 400 turbo trans CUCV, 12v converted... a new chapter 2005 GMC Sierra Crew Cab 6.0 powwwaa!!! custom jumpseat install w/ captain seats, Hypertech tuner, MSD Blaster Coils, CB and twin antenna's, all electric interior, touch screen in dash. custom center console, with jump seat replacing original console. 1500 HD! |
04-05-2007, 10:36 PM | #5 |
Registered User
Join Date: Jan 2007
Location: georgia
Posts: 72
|
Re: Dang! I am gonna have to unlift my ride!
Install a remote start,crank it when you are getting ready for work just leave the heater on high when you get out at night.
|
04-05-2007, 11:19 PM | #6 |
White 82
Join Date: Feb 2004
Location: Eustace, Texas
Posts: 100
|
Re: Dang! I am gonna have to unlift my ride!
im with him
__________________
1966 GTO 455 e-heads, 1982 Chevy k10 4'' lift 33’' tires, 2008 Pontiac g6 v6 |
04-06-2007, 02:19 AM | #7 |
Registered User
Join Date: Feb 2007
Location: Austin, TX
Posts: 3,930
|
Re: Dang! I am gonna have to unlift my ride!
Dig out the floor in the garage and repave the driveway to slant down
I would just go ahead and lower it some. Better than getting rid of it. You got a little time to get things sorted out as spring is coming along, so maybe you can enjoy a summer of wheelin with the current setup then switch at the end of summer. By then you may be able to find someone looking for your setup and willing to pay you a fair price for it. |
04-06-2007, 09:11 AM | #8 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: Dang! I am gonna have to unlift my ride!
I say drop it a little. You were lucky enough to find a really clean Burb, so why start over. It will still look good on 35's and a/c is always a plus...
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
04-06-2007, 09:44 AM | #9 |
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: Dang! I am gonna have to unlift my ride!
I would say add the remote and try it for the first winter, then decide. This isn't Utah and we only had a few large snow's this year (8"-10" at a time). Pitt might get a little more since it's closer to the lake but you might find that you won't mind it being outside. I have a remote on my car and it works really well...
Mike
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" |
04-06-2007, 12:16 PM | #10 |
Registered User
Join Date: Apr 2006
Location: Pittsburgh, PA
Posts: 66
|
Re: Dang! I am gonna have to unlift my ride!
Well, having been born and raised in Pittsburgh, I can tall ya the winters here are not that bad. It gets pretty cold in January, but we really don't see that much snow anymore. Maybe one bad one a year. Depending on what part of town you are moving to, you might be able to find a decent spot of land to build your own garage. If you are anywhere in the city limits, or the close susburbs, then forget it. Houses are close together and garages are a joke. Not to mention certain places are real sticklers about working on your vehicle. Again, just depends where you go. Did you already find a house or have an area you wanna live in?
__________________
84 K10, 350 Auto 72 Chevelle, 454 4spd. 78 Trans Am 400 4spd 88 GTA 350 Auto 94 Cherokee |
04-06-2007, 06:30 PM | #11 |
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,269
|
Re: Dang! I am gonna have to unlift my ride!
Not sure what the rules are any more, been a while since I lived in Pittsburgh, but I would check on what they allow on tires and lifts. PA inspections are a bear and they were a real pain about tires that stick out past the wheel wells. They were not real happy about large lifts either. Before you invest in any changes I would check on the inspection/licensing/local laws on it.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
04-06-2007, 07:29 PM | #12 | |
OBS guy
Join Date: Jun 2004
Location: SoCal
Posts: 1,060
|
Re: Dang! I am gonna have to unlift my ride!
Quote:
There is a lot of great input here and I really appreciate it. I talked to a local 4x4 shop here in PA, and he did mention that they are sticklers for mud flaps and flares as necessary. You guys have good ideas. Maybe I will just keep her outside for a while and see how it goes; I have enough to worry about with the move anyways. It will look out of place with all of the Lexuses and Acuras in the neighbors' driveways! Here's the new diggs-
__________________
88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more Last edited by redz 1970 K5; 04-06-2007 at 07:30 PM. |
|
04-06-2007, 08:42 PM | #13 |
Street Rod Restoration
Join Date: Jan 2004
Location: Wellsburg, WV
Posts: 882
|
Re: Dang! I am gonna have to unlift my ride!
come on down to the burg, yoi! We can eat perogies in my garage and talk 'bout them stillers' HAHA! I spend most of my time in Sewickley, about 10 minutes from where your going to be. Welcome to the area!
__________________
Follow me on Instagram @ hot_rod_shop |
04-06-2007, 09:15 PM | #14 |
Registered User
Join Date: Aug 2006
Location: Florida
Posts: 1,684
|
Re: Dang! I am gonna have to unlift my ride!
nice crib
you ever get around to installing that msd ignition?
__________________
1986 C10 SWB 6.0/6l90e Miami...Flee it like a native |
04-06-2007, 09:23 PM | #15 |
OBS guy
Join Date: Jun 2004
Location: SoCal
Posts: 1,060
|
Re: Dang! I am gonna have to unlift my ride!
I did get the MSD ignition installed, ya. It must have been a month or so ago.
Thanks for the compliment... There is definitely some advantage in selling out West and moving out East. Definitely gives a cost advantage.
__________________
88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more |
04-06-2007, 10:12 PM | #16 |
The Crazy Machanic
Join Date: Jan 2007
Location: Nokesville Va
Posts: 1,437
|
Re: Dang! I am gonna have to unlift my ride!
It will look out of place with all of the Lexuses and Acuras in the neighbors' driveways!
Well that tells them mess with me and ill run over your ride
__________________
*1986 Sliverado longbed 400 small block mean as hell, 700r4 trans (5 speed coming one day) * 1970 chevelle 2dr sedan Latest update June 24 2007. *1957 4 door stationwagon - pink all original needing a good restore (body great, floors bad) newest additions 1965 shortbed fleet great granddads. Been told im nuts to bring it back from the dead (still going to happen) plans-all stock with a turbo 292 inline 3 speed column shift. and thats it big block 427 and 5 speed trans and ford 9 inch theyhave no home yet thinking what to put them in and a 79 c60 trash truck um no idea i have one |
04-06-2007, 10:22 PM | #17 |
Registered User
Join Date: Apr 2006
Location: Pittsburgh, PA
Posts: 66
|
Re: Dang! I am gonna have to unlift my ride!
Hampton is a real nice area, but I can almost bet that your neighbors won't be the kind that like loud 4x4's. PA inspections are pretty strict with lifts, especially if you go to a chain (Pep Boys, etc.). Tires sticking out beyond the wheelwells, mudflaps, and bumper height are tough ones. Now if you find the right inpection place...well, thats a whole nother game.
__________________
84 K10, 350 Auto 72 Chevelle, 454 4spd. 78 Trans Am 400 4spd 88 GTA 350 Auto 94 Cherokee |
04-07-2007, 05:50 AM | #18 |
glamoros piece o' lowlife
Join Date: Mar 2007
Location: Redford, MI
Posts: 1,164
|
Re: Dang! I am gonna have to unlift my ride!
According to a sticky thread over at FSC in PA yer rear bumper shouldn't be higher than 30" off the ground, dunno about the front tho. Tires sticking out can generally be fixed with flares (which are a good idea anyways), mudflaps can be added in various sizes and shapes. Also you might be able to retain yer Utah registration for quite a while, dunno how strict the PA DMV is but here I see cars with Ohio and Indiana or Illinois plates and their owners have been residents of MI for years already.
__________________
The more I drink, the more I drink, the more I drink... diesel, reg cab, long bed, 4 across the rear, single stack, wooden stakes, and lotsa lights - the Hay Express |
04-07-2007, 07:44 AM | #19 |
Registered User
Join Date: Apr 2005
Location: Ar
Posts: 558
|
Re: Dang! I am gonna have to unlift my ride!
Hey thats a really nice pad. It sucks that your rig might not fit the neighborhood. You need to just move down south(AR) and live like you wanna. You can own your big fancy house along with some acres to tear up.
__________________
85 LWB Chevy 350/350stocker with Hooker headers dual Magnaflow mufflers upgraded rearend with Eaton Posi unit with 3.42 gears needs interior work(now my DD) 96 Silverado Xcab mild drop(SOLD). |
04-07-2007, 09:28 AM | #20 |
Registered User
Join Date: Apr 2006
Location: Pittsburgh, PA
Posts: 66
|
Re: Dang! I am gonna have to unlift my ride!
The bumper height thing in PA is wierd. The height pretty much depends on what you have. They classify a full size Blazer as a station wagon, and so it doesn't need Truck plates, so it's bumper height has to meet what a passenger car does, which makes no sense because it sat higher than a car when it was stock. I think you can get it classified as a truck IF you pay the extra for a truck registration. It really depends on how the police are in the area, and the shop you go to. I have 5.5" and 32's on my Cherokee, and it has always passed. It is considered a station wagon, and in no way meets the bumper height law.
__________________
84 K10, 350 Auto 72 Chevelle, 454 4spd. 78 Trans Am 400 4spd 88 GTA 350 Auto 94 Cherokee Last edited by phishfud; 04-07-2007 at 09:28 AM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|