Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
04-30-2007, 01:13 AM | #1 |
Registered User
Join Date: Jan 2007
Location: albany oregon
Posts: 168
|
Re: What did you get done? 04/29
bigblock73 very nice fridge. Benoit, sweet truck, I think thats the 1st time I've seen it. Meanwhile I took the bed off my short wide 73, I was expecting the worst, had sprayed the bolts with pb blaster and torched the first two and the nuts came right off no problem, took off the other six without heat. Unplugged the wiring. I didn't find a ground strap to the bed like some have. Got my dad and two of my sons, lifted the bed off and set it on some saw horses. put some jack stands under it and started drilling the rivets out of the front of the rear leaf spring hangers. Drilled the first two and and took the air hammer with the chisel bit and started a slot and then took a cold chisel and hammer and popped the rivets right out, fairly easy. the other two rivets didn't even drill just chiseled off. the bolts they gave me were too big for the holes in my frame, will have to buy some just smaller. Ran out of time and stopped for the weekend, am really hoping that I can get the other side off without pulling the gas tank. Bob
|
04-30-2007, 01:02 AM | #2 |
Chevys Kick A$$
Join Date: Jan 2005
Location: Zootown, MT
Posts: 12,699
|
Re: What did you get done? 04/29
Nothing really, bolted down my amp in my Cavy right this time. Hung out with some friends and hung out with my family and had dinner last nite.
__________________
*HOODS is what I answer too* -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!
|
04-30-2007, 07:47 AM | #3 |
Registered User
Join Date: May 2002
Location: VA
Posts: 1,337
|
Re: What did you get done? 04/29
On the 85, we got the 'new' 305 torn down completely - it has definitely been rebuilt and bored .030... cleaned everything up and ordered the parts. Now, we are just waiting on the parts!
__________________
69 Chevy C10 88 Sierra 02 2500 Suburban And too many S10s to list! |
04-30-2007, 11:54 AM | #4 |
Insert Witty Text Here
Join Date: Oct 2002
Location: San Antonio, TX
Posts: 3,415
|
Re: What did you get done? 04/29
Friday night after work I drove up to Dallas for the Pate Swap meet the next day. After having to switch rooms due to a broken bed in my room, and having a naked man scream at me in the hallway ( WTF?), I went to sleep about 2:00 a.m.
Up the next day at 7:30, at the swapmeet by 9:30. By 4:00, I was only halfway through, and vendors were already packing up. I left about 6:30, and immediately hit a traffic jam on IH35. They were working on the highway, and had it go from 2 lanes to one. It took me 1 hour 45 minutes to get past it. I made it home at 1:30 a.m. and in bed by 2:00. I was supposed to be out on the lake fishing with a buddy at 6:00 a.m. the next morning. His boat wouldn't start, and he had to cancel. I was so tired, it was probably for the best. I slept in until 1:30 pm yesterday, and I'm still tired today. I'm getting too old for this stuff. I saw some good deals at Pate, but nothing I needed for my truck. One guy had a bunch of NOS 73-87 stuff, but nothing for my truck. I found a tach dash for $75, but I don't know enough about them to know if it was all there or if I could use it. Oh well. Slonaker |
04-30-2007, 12:18 PM | #5 |
On a budget like Fred Sanford
Join Date: Oct 2005
Location: Topeka, KS
Posts: 2,031
|
Re: What did you get done? 04/29
Got the bottom end of my 383 buttoned up. My roller rockers should be here this afternoon, then I can measure for pushrod length and p-v clearance and get the heads/intake on. Hopefully have her finished up & in the truck by June!
__________________
'85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread '98 Camaro z28: 370ci twin turbo 370ci build '01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD |
04-30-2007, 03:43 PM | #6 |
Registered User
Join Date: Jun 2003
Location: Snohomish,Washington
Posts: 226
|
Re: What did you get done? 04/29
Weekend turned out to be mostly non-truck related!!
The wife took a well deserved weekend down to Vegas so I was tied up with the the 2 kids. (9month old and 3 year old) I was in luck as Grandpa spent all wekeend with us I have an upcoming Car Club meeting/show at the hosue on the 10th so I needed to catch up on quite a few chores. I was able to get a ton of yard work done while he entertained the kidlet's!
Looking forward to next weekend!
__________________
-John II "A Little's Good! A Lot's Better! & Too Much is Just Right!!" -1978 Chevy C10 Stepside 350/4sp/12 bolt -1967 Nova 2dr HT & a couple others... |
04-30-2007, 04:04 PM | #7 |
Dark Heart Motorsports
Join Date: Apr 2007
Location: 29404 DKFX
Posts: 683
|
Re: What did you get done? 04/29
I was lucky enough that I didn't get to be bored I got to work...me fix planes is all I will say
__________________
How Deep Can YOU Bleed..? 1985 Chevy Blazer K5- 6.2 N/A, 400 turbo trans CUCV, 12v converted... a new chapter 2005 GMC Sierra Crew Cab 6.0 powwwaa!!! custom jumpseat install w/ captain seats, Hypertech tuner, MSD Blaster Coils, CB and twin antenna's, all electric interior, touch screen in dash. custom center console, with jump seat replacing original console. 1500 HD! |
04-30-2007, 05:16 PM | #8 |
>130dB Moderator
Join Date: Aug 2006
Location: Sacramento, CA
Posts: 2,130
|
Re: What did you get done? 04/29
Put a new floor down in our game room.
__________________
Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum. |
04-30-2007, 07:11 PM | #9 |
Registered User
Join Date: Jan 2007
Location: USA
Posts: 440
|
Re: What did you get done? 04/29
Brought the truck to my parents' home in Charlotte, where it will be resting until getting shipped to Fort Hood, Texas.
Starting to clean and pack as well as clear Fort Benning, have to be out of here by May 9th...
__________________
Kurt Instagram: @kurtkphoto 1978 C10 Silverado 1991 Camaro B4C |
05-01-2007, 08:37 AM | #10 |
Senior Member
Join Date: Oct 2006
Location: central jersey
Posts: 763
|
Re: What did you get done? 04/29
went to the swap meet and bought some stuff i didn't need and one thing i really did, a door for my silverado for $150. oh yea and my friend broke the drive shaft in it later on.
__________________
69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|