Frame Notch Question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*project 67 sub* · 05-10-2007, 12:01 PM

Does anyone know if the KP components frame notch for the 67-72 blazers, trucks, and burbs will allow tem to lay frame? And if so on what size 20" tire will it lay out on?

P.S. Thanks for any info in advance. Oh yah, and this site is great, with alot of usefull info.

project 67 sub

BigShoe24 · 05-10-2007, 02:07 PM

67 Burb, You might lay if you run a low profile tire with a 20" wheel. you will probably need to section or z the frame a bit as well. Hope this provides a little insight.

67Fleet · 05-10-2007, 11:41 PM

With a 27" tire, yes.

lowrollin70gmc · 05-11-2007, 07:50 PM

You can also talk to them and get a larger notch for larger tires, it gives a phone # to talk to somewhere on their site and I don't think it's any more $$$, just have to tell them your plans.

BigShoe24 · 05-13-2007, 10:22 PM

Here is few pics of the kp notch, pretty sure these tires are 28" tall

C3500 · 05-14-2007, 01:03 AM

You can talk to Clint Petree at KP Components Inc. 866-KP-LINKS or www.kpcomponents.com he know this trucks. a sub frame is the same as a long bed c10. if the frame cruves in over the axle. They also just came out with a kit for 67-72 c10s give clint a call he'll gadly help you out..

05-10-2007, 12:01 PM	#1
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Frame Notch Question. Does anyone know if the KP components frame notch for the 67-72 blazers, trucks, and burbs will allow tem to lay frame? And if so on what size 20" tire will it lay out on? P.S. Thanks for any info in advance. Oh yah, and this site is great, with alot of usefull info. project 67 sub

05-10-2007, 02:07 PM	#2
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: Frame Notch Question. 67 Burb, You might lay if you run a low profile tire with a 20" wheel. you will probably need to section or z the frame a bit as well. Hope this provides a little insight.

05-10-2007, 11:41 PM	#3
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: Frame Notch Question. With a 27" tire, yes. __________________ -Bret 67 short-fleet sold!

05-11-2007, 07:50 PM	#4
lowrollin70gmc Too many projects Join Date: Mar 2004 Location: Fargo, ND land of the flat hills Posts: 1,147	Re: Frame Notch Question. You can also talk to them and get a larger notch for larger tires, it gives a phone # to talk to somewhere on their site and I don't think it's any more $$$, just have to tell them your plans. __________________ Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" 70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc 68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac" 63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car" 53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon” 30 Model A 16 Focus ST

05-13-2007, 10:22 PM	#5
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: Frame Notch Question. Here is few pics of the kp notch, pretty sure these tires are 28" tall Attached Images Last edited by BigShoe24; 05-13-2007 at 10:27 PM.

05-14-2007, 01:03 AM	#6
C3500 Registered User Join Date: Feb 2007 Location: santa clara Posts: 27	Re: Frame Notch Question. You can talk to Clint Petree at KP Components Inc. 866-KP-LINKS or www.kpcomponents.com he know this trucks. a sub frame is the same as a long bed c10. if the frame cruves in over the axle. They also just came out with a kit for 67-72 c10s give clint a call he'll gadly help you out..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.