anyone near southwest va. interested in a nice driver shape lwb stepside bed? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 08-24-2007, 11:11 PM

i am getting me a 71 gmc to use as a work truck . it has a nice driver shape lwb stepside bed on it box is good and soild wood floor is gone and replaced with plywood i think i didn't look at it long . going try to get it home tomarrow. pass. side bed fender looked just about perfect surface rust under neith good green paint on all of it. driver side fender has a couple small dents toward bottom rear of fender and some rust threw where it meets the inner box/bed steps are good and soild ft. gate very good shape. tailgate is not included that is the deal with the way i bought the truck i will be asking $500.00 for the bed . if i can sale it i will put 1 of my wide beds on it if it runs out good.if not i will part it out.

billsbowtie · 08-25-2007, 09:31 PM

heres a few pics. and above i said the floor was gone its not it has very good wood that is covered up with a piece of mining belt.

billsbowtie · 08-25-2007, 09:31 PM

billsbowtie · 08-25-2007, 09:31 PM

billsbowtie · 08-25-2007, 09:46 PM

Tigman · 08-26-2007, 08:38 AM

I'm in Big Stone Gap!! What do you want for the truck?

Mark

**special-K** · 08-26-2007, 08:43 AM

Just a thought:If no one wants it as a longbed,it would be real easy to make a shortbed out of it.

bean · 08-26-2007, 01:48 PM

have you decided yet if you're going to part it out?

billsbowtie · 08-26-2007, 05:59 PM

tigman i would take $1500.00 for it before i tag it. witch is going to be soon i hope. it has a new jasper short block new carb fuel pump wires plugs dis. cap head has been redone cab is soild except floor suports needs 2 or 3 of them. it has been setting about 2 or 3 years under a shed so the gas was bad . i cleaned it out . today i bought new plugs fuel filter and stuff to change oil. i think that will help it alot. let me no if you are interested in it. i was going to sale the bed and put a wide bed on it and use it for a work truck. it says on the title that is only has 67000 act miles .
special-k i was thinking the same thing. it has a super nice pass. fender the hole box is real good for a driver. i was suprized when we put it on the rollback and saw the wood floor from under neith.
bean what parts where you interrested in i have 4 other trucks i am junking out.

billsbowtie · 08-26-2007, 06:15 PM

tigman heres my # if you want to call me 276-346-3426 ask for big bill

billsbowtie · 09-06-2007, 11:04 PM

bed is still f/s

08-24-2007, 11:11 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	anyone near southwest va. interested in a nice driver shape lwb stepside bed? i am getting me a 71 gmc to use as a work truck . it has a nice driver shape lwb stepside bed on it box is good and soild wood floor is gone and replaced with plywood i think i didn't look at it long . going try to get it home tomarrow. pass. side bed fender looked just about perfect surface rust under neith good green paint on all of it. driver side fender has a couple small dents toward bottom rear of fender and some rust threw where it meets the inner box/bed steps are good and soild ft. gate very good shape. tailgate is not included that is the deal with the way i bought the truck i will be asking $500.00 for the bed . if i can sale it i will put 1 of my wide beds on it if it runs out good.if not i will part it out. __________________ i have 67/72 chevy truck parts f/s.

08-25-2007, 09:31 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? heres a few pics. and above i said the floor was gone its not it has very good wood that is covered up with a piece of mining belt. __________________ i have 67/72 chevy truck parts f/s.

08-25-2007, 09:31 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? __________________ i have 67/72 chevy truck parts f/s.

08-25-2007, 09:31 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? __________________ i have 67/72 chevy truck parts f/s.

08-25-2007, 09:46 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? __________________ i have 67/72 chevy truck parts f/s.

08-26-2007, 08:38 AM	#6
Tigman Registered User Join Date: Jul 2007 Location: Big Stone Gap, Va Posts: 84	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? I'm in Big Stone Gap!! What do you want for the truck? Mark

08-26-2007, 08:43 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? Just a thought:If no one wants it as a longbed,it would be real easy to make a shortbed out of it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 08-26-2007 at 08:45 AM.

08-26-2007, 01:48 PM	#8
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? have you decided yet if you're going to part it out?

08-26-2007, 05:59 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? tigman i would take $1500.00 for it before i tag it. witch is going to be soon i hope. it has a new jasper short block new carb fuel pump wires plugs dis. cap head has been redone cab is soild except floor suports needs 2 or 3 of them. it has been setting about 2 or 3 years under a shed so the gas was bad . i cleaned it out . today i bought new plugs fuel filter and stuff to change oil. i think that will help it alot. let me no if you are interested in it. i was going to sale the bed and put a wide bed on it and use it for a work truck. it says on the title that is only has 67000 act miles . special-k i was thinking the same thing. it has a super nice pass. fender the hole box is real good for a driver. i was suprized when we put it on the rollback and saw the wood floor from under neith. bean what parts where you interrested in i have 4 other trucks i am junking out. __________________ i have 67/72 chevy truck parts f/s.

08-26-2007, 06:15 PM	#10
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? tigman heres my # if you want to call me 276-346-3426 ask for big bill __________________ i have 67/72 chevy truck parts f/s.

09-06-2007, 11:04 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? bed is still f/s __________________ i have 67/72 chevy truck parts f/s.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.