A few pictures of the shop Burb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Tim Christian** · 10-06-2007, 07:51 PM

She don't get a lot of attention!!!!!!

72GMCburban · 10-06-2007, 07:58 PM

I like the stance. Did you put a drop kit on it? If so what's ya do?

**Tim Christian** · 10-06-2007, 08:43 PM

We lowered it with the McGaughys drop stuff we sale. We have 2-1/2in drop spindals with a 1in drop spring in the front and a 5in drop spring in the rear.

**uncle** · 10-06-2007, 10:10 PM

I'd give it a 2nd look,just cause I've got that disease. That's what a parts chaser is supposed to look like anyway.

72GMCburban · 10-06-2007, 10:57 PM

Did you have to mod the rear shock mounts with the 5" drop?

Longhorn Man · 10-07-2007, 01:01 AM

yeah... what size tires are those? And what all did you have to do for the rear? I think i like that stance.

earl87gta · 10-07-2007, 02:30 AM

Thats way cooler then the red 4x4 burb you use to have. I like the door work. I seen it sitting at your shop on the way to Woodridges wish I could have stopped in and take a look at it. I need to go for a cruz out your way on the bike before it gets cold out if its going to get cold out this year.

**Tim Christian** · 10-07-2007, 08:57 AM

I used McGaughys shocks all the way around but it could use a shock relocater kit in the rear to help straighten the angle on the rear shocks up. But they don't offer one I will have to get it somewere else. It is very close to the bump stops in the rear also. The tires are 255/70/15 all the way around the rear are just fine the front does rub a little when you are turning steep fine going straight.

Longhorn Man · 10-07-2007, 01:38 PM

stock panhard bar? What do the springs cost through you to 43228? (just checkin at the moment, but in the plans) How does it ride?

Longhorn Man · 10-07-2007, 01:39 PM

mannnn.... I sound like an FNG.

72armyswbtruck · 10-08-2007, 02:49 AM

So now that you have the burb, this is where your hangin out.

Don't worry I should be the proud owner of a burb if everything else works out.

**Tim Christian** · 10-08-2007, 08:49 PM

Hey Long Horn Man, It rides great in my opinon. It has the factory panhard bar and the springs run $120.00 a set. Tim

Longhorn Man · 10-08-2007, 11:07 PM

not too shabby.
I'm bookmarking this for when the time comes. thanks.

72cheyennesuper20 · 10-09-2007, 02:41 AM

Why is the roof not rusted like the the hood? Nice ride height. The whole truck looks cool.

**special-K** · 10-09-2007, 07:15 AM

Looks like you`ve been in the Classic GM business for quite some time.

**Chevy454** · 10-09-2007, 11:49 AM

Quote:

Why is the roof not rusted like the the hood?

My Sub has the same paint scheme, and did the same thing...my guess is, that the white paint on the roof reflected enough sunlight/heat to keep it from oxidizing as bad as the blue paint on the hood/fender tops...my the paint is mostly burnt through on my Sub as well. Just a theory, of course.

**67 cst swb** · 10-09-2007, 04:34 PM

Nice shop truck....

earl87gta · 10-09-2007, 04:39 PM

Quote:

Originally Posted by 72cheyennesuper20

Why is the roof not rusted like the the hood? Nice ride height. The whole truck looks cool.

In TN we train our rust to only effect easily replaceable parts.

5150 · 10-09-2007, 10:11 PM

Looks great Tim, did the same guy that did your buddy's orange truck do the painting??

5150 · 10-09-2007, 10:16 PM

oh, I forgot. That cab looks familiar

**special-K** · 10-12-2007, 06:15 AM

Some guys paint flames on the front end to signify a hot motor laying under the hood.This is a more realistic approach,part of the patina fad...all these guys going back and trying to make their rigs look all old and unrestored...whatever

.

10-06-2007, 07:51 PM	#1
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	A few pictures of the shop Burb She don't get a lot of attention!!!!!!

10-06-2007, 07:58 PM	#2
72GMCburban Registered User Join Date: Oct 2006 Location: Fort Worth Posts: 306	Re: A few pictures of the shop Burb I like the stance. Did you put a drop kit on it? If so what's ya do? __________________ --Mike http://rides.webshots.com/album/551997543JkYiXF

10-06-2007, 08:43 PM	#3
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: A few pictures of the shop Burb We lowered it with the McGaughys drop stuff we sale. We have 2-1/2in drop spindals with a 1in drop spring in the front and a 5in drop spring in the rear.

10-06-2007, 10:10 PM	#4
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: A few pictures of the shop Burb I'd give it a 2nd look,just cause I've got that disease. That's what a parts chaser is supposed to look like anyway. Last edited by uncle; 10-06-2007 at 10:12 PM.

10-06-2007, 10:57 PM	#5
72GMCburban Registered User Join Date: Oct 2006 Location: Fort Worth Posts: 306	Re: A few pictures of the shop Burb Did you have to mod the rear shock mounts with the 5" drop? __________________ --Mike http://rides.webshots.com/album/551997543JkYiXF

10-07-2007, 01:01 AM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: A few pictures of the shop Burb yeah... what size tires are those? And what all did you have to do for the rear? I think i like that stance.

10-07-2007, 02:30 AM	#7
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: A few pictures of the shop Burb Thats way cooler then the red 4x4 burb you use to have. I like the door work. I seen it sitting at your shop on the way to Woodridges wish I could have stopped in and take a look at it. I need to go for a cruz out your way on the bike before it gets cold out if its going to get cold out this year. __________________ Earl 68 2500 4x4 GMC Burb

10-07-2007, 08:57 AM	#8
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: A few pictures of the shop Burb I used McGaughys shocks all the way around but it could use a shock relocater kit in the rear to help straighten the angle on the rear shocks up. But they don't offer one I will have to get it somewere else. It is very close to the bump stops in the rear also. The tires are 255/70/15 all the way around the rear are just fine the front does rub a little when you are turning steep fine going straight.

10-07-2007, 01:38 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: A few pictures of the shop Burb stock panhard bar? What do the springs cost through you to 43228? (just checkin at the moment, but in the plans) How does it ride?

10-07-2007, 01:39 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: A few pictures of the shop Burb mannnn.... I sound like an FNG.

10-08-2007, 02:49 AM	#11
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: A few pictures of the shop Burb So now that you have the burb, this is where your hangin out. Don't worry I should be the proud owner of a burb if everything else works out. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

10-08-2007, 08:49 PM	#12
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: A few pictures of the shop Burb Hey Long Horn Man, It rides great in my opinon. It has the factory panhard bar and the springs run $120.00 a set. Tim

10-08-2007, 11:07 PM	#13
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: A few pictures of the shop Burb not too shabby. I'm bookmarking this for when the time comes. thanks.

10-09-2007, 02:41 AM	#14
72cheyennesuper20 Registered User Join Date: May 2005 Location: Portland, OR. Posts: 414	Re: A few pictures of the shop Burb Why is the roof not rusted like the the hood? Nice ride height. The whole truck looks cool. Last edited by 72cheyennesuper20; 10-09-2007 at 02:43 AM.

10-09-2007, 07:15 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: A few pictures of the shop Burb Looks like you`ve been in the Classic GM business for quite some time. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

10-09-2007, 04:34 PM	#17
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: A few pictures of the shop Burb Nice shop truck.... __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

10-09-2007, 10:11 PM	#19
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: A few pictures of the shop Burb Looks great Tim, did the same guy that did your buddy's orange truck do the painting?? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-09-2007, 10:16 PM	#20
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: A few pictures of the shop Burb oh, I forgot. That cab looks familiar __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-12-2007, 06:15 AM	#21
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: A few pictures of the shop Burb Some guys paint flames on the front end to signify a hot motor laying under the hood.This is a more realistic approach,part of the patina fad...all these guys going back and trying to make their rigs look all old and unrestored...whatever. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.