"Slowly but Surely" Big J's build thread... - Page 23 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 07-14-2010, 12:29 AM

looking good!!!

**Yukon Jack** · 07-14-2010, 10:59 AM

Very nice! Tire/rim combo fits it very well.

Alvin · 07-14-2010, 12:00 PM

Sweet! I'm doing Ethel's brakes this weekend. Hope my master cyl is still good.. it's been sitting awhile too.

**jamie72** · 07-14-2010, 05:11 PM

looking good,you need to finish paint so we can get to the`pretty` parts...lol

Big J · 07-20-2010, 02:20 AM

Worked on the interior panels today. Not what I was wanting to do but funds are short and I want it on the road. When I get the extra dough I'll pull them out and toss on some upholstery. Rustoleum roll on bed liner.

5150 · 07-20-2010, 09:02 AM

Looking good, missed you this weekend, but I know work is always in the way

vtblazer · 10-02-2010, 07:11 PM

Lookin' great J, cool to come back and see the progress!

The yellow looks awesome!

Big J · 10-03-2010, 01:09 AM

Quote:

Originally Posted by vtblazer

Lookin' great J, cool to come back and see the progress!

The yellow looks awesome!

Thanks, still pluggin' away at it. Took all the stereo wiring out to redo for a different head unit. Got all that completed this past week. Now I just need to clean my seats, bolt them down and get it ready for its final paint... Then bolt all the crap on and drive it, lol.

Big J · 10-06-2010, 02:11 AM

Got the front seats cleaned and bolted in, they look way better. jamie72 came over and helped me bolt on the hood and cowl. After a couple hours of messing with alignment it all halfway fits. I figure a couple more hours and it will be good, lol. No pics, took some but it was too dark and they looked like crap. Gonna try and hit it again next Monday and Tuesday.

Big J · 10-12-2010, 11:26 PM

Got a little accomplished today. Front and rear seats are done. Did some surgery on a ammo can, gonna use it for rear storage. Made it fit up against the wheel well. Tossed the roll bar in to see how the seats recline inbetween the bars. Its tight but it works. Stuck the original grill on to check side to side fitment, then took it off and removed all the parts needed for the new grill. I seem to be having a issue getting the steering arm off to replace it with one for the lift. It simply refuses to let loose, lol.

Big J · 10-16-2010, 01:48 PM

My cousin came over this morning and helped get it off. Took 2 hours... He has done a ton of lifts on Chevy trucks and he said this is the hardest one he ever messed with. We heated it, beat on it, heated, beat..... and nothin....
So he commenced to cutting, little by little. Finally with a strong blow of the hammer it popped up. Luckily the local Chevy dealer was able to get new Steering Arm Adapters in next day, the little cone things. I got it back together too. I'll post up the part number later.

tantrumpipeline · 11-04-2010, 11:02 PM

Quote:

Originally Posted by Big J

My cousin came over this morning and helped get it off. Took 2 hours... He has done a ton of lifts on Chevy trucks and he said this is the hardest one he ever messed with. We heated it, beat on it, heated, beat..... and nothin....
So he commenced to cutting, little by little. Finally with a strong blow of the hammer it popped up. Luckily the local Chevy dealer was able to get new Steering Arm Adapters in next day, the little cone things. I got it back together too. I'll post up the part number later.

so funny to see this, probably not a 4wd guy around that hasn't had to go to this extreme at some point or another, I don't get how they seize so bad. This is a great build, hard to believe that's the same truck, great work, can't wait to see the progress

Chevyman63 · 03-01-2011, 11:29 AM

Very cool to see progress J!!

VA72C10 · 10-12-2010, 11:52 PM

cool storage box! Looking good!

SeventyOne · 10-13-2010, 12:21 AM

I like the color! Is that an original grill surround, or aftermarket?

That steering arm is held on by conical washer that tighten as you pull up on the arm. I had to take my knuckle into the machine shop to have them press it off. Good luck with it.

Big J · 10-14-2010, 12:39 PM

Quote:

Originally Posted by VA72C10

cool storage box! Looking good!

Took me awhile to find one the right size. Wish I'd of picked up a few more.

Quote:

Originally Posted by SeventyOne

I like the color! Is that an original grill surround, or aftermarket?

That steering arm is held on by conical washer that tighten as you pull up on the arm. I had to take my knuckle into the machine shop to have them press it off. Good luck with it.

That is the original grill surround. Looks way better in the pic then it actually is. I got a new one waiting to go on.

So far the steering arm is winning. I bet I have 5-6 hours in on it now. I will have a plasma cutter to use on it Saturday morning. Thats the plan anyways.

**jaros44sr** · 10-14-2010, 12:51 PM

[QUOTE=Big J;4240469

So far the steering arm is winning. I bet I have 5-6 hours in on it now. I will have a plasma cutter to use on it Saturday morning. Thats the plan anyways.

[/QUOTE]

good attitude, damned if I would let some piece of metal win

you may actually get to drive yours before me

vtblazer · 10-14-2010, 01:02 PM

Quote:

Originally Posted by jaros44sr

you may actually get to drive yours before me

You'll both be on the road before me dammit.

SeventyOne · 10-15-2010, 12:44 AM

Quote:

Originally Posted by Big J

That is the original grill surround. Looks way better in the pic then it actually is. I got a new one waiting to go on.

New one = repop? They any good?

Big J · 10-15-2010, 01:42 AM

Quote:

Originally Posted by jaros44sr

In order for me to beat you, I still have to:

build a new 3 car mancave
start a new business venture
buy a boat
buy a jeep
get in r/c'n airplanes
build a hockey rink in my back yard

aaaaaaaaaaaaaaaannnnnnnnnnnnnnddddddddddddd!!!!!
still finish my resto- store

Now thats just good clean humor right there

Quote:

Originally Posted by SeventyOne

New one = repop? They any good?

Took it out of the box, looks nice. Won't know for sure how nice until I have the middle and side pieces riveted on and it bolted up to the truck. Hopefully it will be as good as the original. I will post up pics when its done.

5150 · 10-15-2010, 02:48 AM

I know you are busy, but are you guys coming down to Bowling Green?
Posted via Mobile Device

Big J · 10-16-2010, 01:04 AM

Quote:

Originally Posted by 5150

I know you are busy, but are you guys coming down to Bowling Green?
Posted via Mobile Device

Can't get off work

Have fun for the rest of us...

VA72C10 · 10-16-2010, 03:05 PM

Good job....you beat it into submission

hgs_notes · 11-04-2010, 08:46 AM

Looks very good. Those valve covers are very cool.

VA72C10 · 11-04-2010, 09:09 AM

looking great!!!

07-14-2010, 12:29 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: "Slowly but Surely" Big J's build thread... looking good!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-14-2010, 10:59 AM	#2
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,689	Re: "Slowly but Surely" Big J's build thread... Very nice! Tire/rim combo fits it very well. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

07-14-2010, 12:00 PM	#3
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: "Slowly but Surely" Big J's build thread... Sweet! I'm doing Ethel's brakes this weekend. Hope my master cyl is still good.. it's been sitting awhile too. __________________ Ethel - The Legend Continues... Ethel has been sold.

07-14-2010, 05:11 PM	#4
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	Re: "Slowly but Surely" Big J's build thread... looking good,you need to finish paint so we can get to the`pretty` parts...lol __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

07-20-2010, 02:20 AM	#5
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: "Slowly but Surely" Big J's build thread... Worked on the interior panels today. Not what I was wanting to do but funds are short and I want it on the road. When I get the extra dough I'll pull them out and toss on some upholstery. Rustoleum roll on bed liner. __________________ BAZINGA! My Build Last edited by Big J; 07-20-2010 at 02:21 AM.

07-20-2010, 09:02 AM	#6
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: "Slowly but Surely" Big J's build thread... Looking good, missed you this weekend, but I know work is always in the way __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-02-2010, 07:11 PM	#7
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: "Slowly but Surely" Big J's build thread... Lookin' great J, cool to come back and see the progress! The yellow looks awesome!

10-06-2010, 02:11 AM	#9
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: "Slowly but Surely" Big J's build thread... Got the front seats cleaned and bolted in, they look way better. jamie72 came over and helped me bolt on the hood and cowl. After a couple hours of messing with alignment it all halfway fits. I figure a couple more hours and it will be good, lol. No pics, took some but it was too dark and they looked like crap. Gonna try and hit it again next Monday and Tuesday. __________________ BAZINGA! My Build

10-12-2010, 11:26 PM	#10
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: "Slowly but Surely" Big J's build thread... Got a little accomplished today. Front and rear seats are done. Did some surgery on a ammo can, gonna use it for rear storage. Made it fit up against the wheel well. Tossed the roll bar in to see how the seats recline inbetween the bars. Its tight but it works. Stuck the original grill on to check side to side fitment, then took it off and removed all the parts needed for the new grill. I seem to be having a issue getting the steering arm off to replace it with one for the lift. It simply refuses to let loose, lol. __________________ BAZINGA! My Build Last edited by Big J; 10-12-2010 at 11:28 PM.

10-16-2010, 01:48 PM	#11
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: "Slowly but Surely" Big J's build thread... My cousin came over this morning and helped get it off. Took 2 hours... He has done a ton of lifts on Chevy trucks and he said this is the hardest one he ever messed with. We heated it, beat on it, heated, beat..... and nothin.... So he commenced to cutting, little by little. Finally with a strong blow of the hammer it popped up. Luckily the local Chevy dealer was able to get new Steering Arm Adapters in next day, the little cone things. I got it back together too. I'll post up the part number later. __________________ BAZINGA! My Build

03-01-2011, 11:29 AM	#13
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: "Slowly but Surely" Big J's build thread... Very cool to see progress J!! __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

10-12-2010, 11:52 PM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: "Slowly but Surely" Big J's build thread... cool storage box! Looking good! __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-13-2010, 12:21 AM	#15
SeventyOne Registered User Join Date: Mar 2007 Location: Oakland, Ca Posts: 1,382	Re: "Slowly but Surely" Big J's build thread... I like the color! Is that an original grill surround, or aftermarket? That steering arm is held on by conical washer that tighten as you pull up on the arm. I had to take my knuckle into the machine shop to have them press it off. Good luck with it.

10-14-2010, 12:51 PM	#17
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,841	Re: "Slowly but Surely" Big J's build thread... [QUOTE=Big J;4240469 So far the steering arm is winning. I bet I have 5-6 hours in on it now. I will have a plasma cutter to use on it Saturday morning. Thats the plan anyways.[/QUOTE] good attitude, damned if I would let some piece of metal win you may actually get to drive yours before me __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 10-14-2010 at 12:52 PM.

10-15-2010, 02:48 AM	#21
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: "Slowly but Surely" Big J's build thread... I know you are busy, but are you guys coming down to Bowling Green? Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4



Register or Log In To remove these advertisements.

10-16-2010, 03:05 PM	#23
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: "Slowly but Surely" Big J's build thread... Good job....you beat it into submission __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-04-2010, 08:46 AM	#24
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: "Slowly but Surely" Big J's build thread... Looks very good. Those valve covers are very cool. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

11-04-2010, 09:09 AM	#25
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: "Slowly but Surely" Big J's build thread... looking great!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.