11-07-2007, 07:18 PM | #1 |
resident wrencher
Join Date: Dec 2006
Location: ramona california
Posts: 720
|
tach problems
prob is that my tach dosnt work it has the wires but arnt pluged in wher do they go
|
11-07-2007, 09:31 PM | #2 |
Registered thread killer
Join Date: Nov 2006
Location: Cookson, OK.
Posts: 349
|
Re: tach problems
Depending on your ignition system, one wire would go to ground, and one to either the coil (-), or distributor if the coil is part of the distributor, if your coil is integrated into the dist, they usually have a dedicated tach prong marked (tach) . and if you have a light, one would go to a switch activated wire when you turn your lights on.
__________________
!966 stepside, 350 SB, ZZ-4 roller, Crane roller rockers, 0.030 flat tops, airgap intake, 750 Holley, stainless steel headers, edelbrock SDT mufflers, Mark 8 elec fan, 700R-4, column shift Last edited by 04Xrider; 11-07-2007 at 09:35 PM. |
11-08-2007, 06:14 PM | #3 |
resident wrencher
Join Date: Dec 2006
Location: ramona california
Posts: 720
|
Re: tach problems
its a stock points and condenser
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|