Beer keg gas tank? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MXmaniac · 11-07-2007, 01:07 PM

Has anybody turned a beer keg into a gas tank for their truck? I'm planning out my '64 and i think a beer keg mounted on its side at the front of the bed would make a pretty cool gas tank. Anybody seen this done?

Skirtchaser · 11-13-2007, 09:47 AM

Yes I have, and not like I have any experience with making mistakes or anything

but it's not D.O.T. legal and in some municipalities it can cause you trouble. BUT What will look E X T R E E M L Y cool and be legal is go to a local heavy truck junkyard and get an aluminum center fill Peterbilt 40 gal. tank and stainless straps. Get some 4" aluminum "c" stock and cut it into two 18" sections. Grind out the channels to accommodate the tank and bolt them to the cross sections of the bed frame. Fab some cross sections and drill them out to accept the strap end bolts and have them welded to the "c" stock. Polish the tank and the straps and mount the bad boy up. Plumb the outlet and vent lines in braid with AN fittings.
I saw this done on a short bed 65' at the track in Phoenix SICK!!

watahyahknow · 11-13-2007, 09:53 AM

i've seen it done on a trike behind the driverseat if you can weld aluminium you should be able to make a pickuppipe a breatherpipe a fuelreturn and a gascap , the trike had one of those gascaps that looked like a knock off centrenut for spokewheels

11-07-2007, 01:07 PM	#1
MXmaniac Registered User Join Date: Jan 2007 Location: Denton, Texas Posts: 356	Beer keg gas tank? Has anybody turned a beer keg into a gas tank for their truck? I'm planning out my '64 and i think a beer keg mounted on its side at the front of the bed would make a pretty cool gas tank. Anybody seen this done? __________________ Andrew '69 C-20(292, 4-speed) Retired Daily Driver '64 C-10(250, 3-speed) Fixerupper '97 F*rd Mustang GT(4.6L, 5-speed) Daily Driver If I only wanted two pedals I'd have bought a bicycle.

11-13-2007, 09:47 AM	#2
Skirtchaser Registered User Join Date: Sep 2007 Location: Kingman, Az. Posts: 27	Re: Beer keg gas tank? Yes I have, and not like I have any experience with making mistakes or anythingbut it's not D.O.T. legal and in some municipalities it can cause you trouble. BUT What will look E X T R E E M L Y cool and be legal is go to a local heavy truck junkyard and get an aluminum center fill Peterbilt 40 gal. tank and stainless straps. Get some 4" aluminum "c" stock and cut it into two 18" sections. Grind out the channels to accommodate the tank and bolt them to the cross sections of the bed frame. Fab some cross sections and drill them out to accept the strap end bolts and have them welded to the "c" stock. Polish the tank and the straps and mount the bad boy up. Plumb the outlet and vent lines in braid with AN fittings. I saw this done on a short bed 65' at the track in Phoenix SICK!! __________________ http://www.motherroadrods.com

11-13-2007, 09:53 AM	#3
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Beer keg gas tank? i've seen it done on a trike behind the driverseat if you can weld aluminium you should be able to make a pickuppipe a breatherpipe a fuelreturn and a gascap , the trike had one of those gascaps that looked like a knock off centrenut for spokewheels __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.