Frenched stepper short taillights? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WinDancer · 11-25-2007, 04:13 AM

Has anyone converted their stepper tail lights and frenched them into the rear fenders?
Pics and methods?
Thanks,

kaycee · 11-25-2007, 09:29 AM

Use the search button there was a post on this a few days ago

WinDancer · 11-28-2007, 11:34 PM

Thanks, KayCee- the other search I did, and found almost nothing, was on tail lights. This time I did taillights and found a hole slug of good info.
Thanks,

slowtruck · 11-29-2007, 07:44 PM

the PO of my truck put Vega tail lights and Frenched them in. The person that done it did such a good job I've decided to leave them.

I will try and get some pics.

WinDancer · 11-29-2007, 09:48 PM

Cool, thanks

westbrookw · 11-29-2007, 09:51 PM

Not in the fenders

slowtruck · 11-29-2007, 10:24 PM

this is the best I could find for now.

WinDancer · 12-17-2007, 10:40 AM

That is exactly what I was hoping for. I like this a LOT more than having them just hanging out in space the way they do.
Any idea what year Vega?

toomanytoyz · 12-17-2007, 10:47 AM

Couple of Thread's with Lot's of Pics.............

Rick

http://67-72chevytrucks.com/vboard/s...d.php?t=259119

http://67-72chevytrucks.com/vboard/s...d.php?t=186476

Fe2o3 · 12-17-2007, 11:47 AM

Quote:

Any idea what year Vega?

Those look to be a '71, 2, or 3 Vega. The tailllights got a lot bigger after that.

PanelDeland · 12-17-2007, 02:26 PM

I've seen '59 Caddy Bullets in a Stepper.They were frenched in with some type tubing.It's been a while since I saw that truck and i have no pics.I think there were 2 to a side.I thought it was not the best mod since the custom mod did not match the era.

slowtruck · 12-17-2007, 02:58 PM

I'm sorry I forgot about this tread...

I've been meaning to get better pics, so I did. The PO had them installed and at first I was going to get rid of them, but the installer done a quality job on them and I think my buddy would kill me if I did remove them.I do have some plans for them like replace the lens with a smooth one ( I have not figured out a good way yet) and build an LED setup for them.

WinDancer · 12-18-2007, 04:35 PM

Sweeeeeeeeeeeeeeeeeeeeeeeeeeeet!!!
Thanks for the pics- exactly what I am hoping to do.

ETsC10 · 12-18-2007, 05:10 PM

Yikes Dave!!! YOU ARE ON A ROLL!!

Can't wait to see what you accomplish with your new step bed!!

kyull67 · 12-19-2007, 03:00 PM

I've got 1940's tailights in my fenders.

WinDancer · 12-19-2007, 05:15 PM

kyull67
Nice, clean job!
Did you buy them with the tunneling buckets or?

duane67c-10 · 12-21-2007, 01:35 PM

in custom classic trucks i saw 66 mustang tail lights frenched in the rear fenders, they looked pretty good, almost like they came factory.

kyull67 · 12-21-2007, 02:47 PM

Quote:

Originally Posted by WinDancer

kyull67
Nice, clean job!
Did you buy them with the tunneling buckets or?

I cant take credit, I bought the bed completed.

11-25-2007, 04:13 AM	#1
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Frenched stepper short taillights? Has anyone converted their stepper tail lights and frenched them into the rear fenders? Pics and methods? Thanks, __________________ Dave 69 GMC SWB 2WD 454 Turbo 400

11-25-2007, 09:29 AM	#2
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,456	Re: Frenched stepper short taillights? Use the search button there was a post on this a few days ago __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327/4L60

11-28-2007, 11:34 PM	#3
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: Frenched stepper short taillights? Thanks, KayCee- the other search I did, and found almost nothing, was on tail lights. This time I did taillights and found a hole slug of good info. Thanks, __________________ Dave 69 GMC SWB 2WD 454 Turbo 400

11-29-2007, 07:44 PM	#4
slowtruck Registered User Join Date: Feb 2007 Location: Cabot AR. Posts: 126	Re: Frenched stepper short taillights? the PO of my truck put Vega tail lights and Frenched them in. The person that done it did such a good job I've decided to leave them. I will try and get some pics.

11-29-2007, 09:48 PM	#5
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: Frenched stepper short taillights? Cool, thanks __________________ Dave 69 GMC SWB 2WD 454 Turbo 400

11-29-2007, 09:51 PM	#6
westbrookw LET'S GO...MOUNTAINEERS Join Date: Oct 2007 Location: Williamstown, WV Posts: 339	Re: Frenched stepper short taillights? Not in the fenders Attached Images

11-29-2007, 10:24 PM	#7
slowtruck Registered User Join Date: Feb 2007 Location: Cabot AR. Posts: 126	Re: Frenched stepper short taillights? this is the best I could find for now.

12-17-2007, 10:40 AM	#8
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: Frenched stepper short taillights? That is exactly what I was hoping for. I like this a LOT more than having them just hanging out in space the way they do. Any idea what year Vega? __________________ Dave 69 GMC SWB 2WD 454 Turbo 400

12-17-2007, 10:47 AM	#9
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Frenched stepper short taillights? Couple of Thread's with Lot's of Pics............. Rick http://67-72chevytrucks.com/vboard/s...d.php?t=259119 http://67-72chevytrucks.com/vboard/s...d.php?t=186476 __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

12-17-2007, 02:26 PM	#11
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Frenched stepper short taillights? I've seen '59 Caddy Bullets in a Stepper.They were frenched in with some type tubing.It's been a while since I saw that truck and i have no pics.I think there were 2 to a side.I thought it was not the best mod since the custom mod did not match the era. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" Last edited by PanelDeland; 12-17-2007 at 02:28 PM.

12-17-2007, 02:58 PM	#12
slowtruck Registered User Join Date: Feb 2007 Location: Cabot AR. Posts: 126	Re: Frenched stepper short taillights? I'm sorry I forgot about this tread... I've been meaning to get better pics, so I did. The PO had them installed and at first I was going to get rid of them, but the installer done a quality job on them and I think my buddy would kill me if I did remove them.I do have some plans for them like replace the lens with a smooth one ( I have not figured out a good way yet) and build an LED setup for them.

12-18-2007, 04:35 PM	#13
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: Frenched stepper short taillights? Sweeeeeeeeeeeeeeeeeeeeeeeeeeeet!!! Thanks for the pics- exactly what I am hoping to do. __________________ Dave 69 GMC SWB 2WD 454 Turbo 400

12-18-2007, 05:10 PM	#14
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: Frenched stepper short taillights? Yikes Dave!!! YOU ARE ON A ROLL!! Can't wait to see what you accomplish with your new step bed!!

12-19-2007, 03:00 PM	#15
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Frenched stepper short taillights? I've got 1940's tailights in my fenders. Attached Images __________________ The first '67 The current '67 '63 Biscayne

12-19-2007, 05:15 PM	#16
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: Frenched stepper short taillights? kyull67 Nice, clean job! Did you buy them with the tunneling buckets or? __________________ Dave 69 GMC SWB 2WD 454 Turbo 400



Register or Log In To remove these advertisements.

12-21-2007, 01:35 PM	#17
duane67c-10 Registered User Join Date: Oct 2007 Location: fairview tennessee Posts: 122	Re: Frenched stepper short taillights? in custom classic trucks i saw 66 mustang tail lights frenched in the rear fenders, they looked pretty good, almost like they came factory.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.