GM parts sale - left over parts

[gchemist]

1 - GM 10185063 dual plane aluminumg manifold off a ZZ4. Edelbrock intake bolts included. Retail $165.95 at www.spdc2000.com Asking $100

1 - set of SB center bolt valve covers, stock and black. $10.00 A second set will be available once I install chrome center bolt covers.

1 - set of Accel 8 mm red wires. Part number Part Number: 4040R at www.partsamerica.com Retail 35.94. These are cut to fit. You crimp the type of end you want for the coil end. I can't use them because they have straight boots. I bought another set with angle boots to fit my Chevelle headers. Lost the darn receipt.
Total cost $30 with shipping.

1 - partial set of serpentine belt system. Crank pulley, no smog A/C and power steering/alternator bracket. Each bought new from gmpartsdirect.
$80 for both brackets. Each retail near $70 each.

1 - 83 front chrome bumper. One small ding. $40.00

1 - ZZ4 water pump $15

1 - V-belt alternator - 65 amp. $15 I can have it tested to ensure it works.

New parts: a set of chrome valve covers (Mr. Gasket) - center bolt. These go over the existing valve cover!! I don't like them. Brand new!! $35

Pictures available. Shipping not included.
As I clean out the garage I'll post more items.
Paypal acceptable, pickup available too.

[cjracing15]

PM sent on bumper

[old Rusty C10]

please post a pic of the valve covers? are the center bolt or side bolt?

[gchemist]

Originally Posted by cjracing15

PM sent on bumper

The ding is right above the license plate. Look at the pictures. Looks like someone backed into the bumper with a hitch corner or something. I had no beef of leaving on my truck. I'm only changing it because of the 81-82 bumper for the ram airbox setup. I'll check into delivery.

[gchemist]

Originally Posted by old Rusty C10

please post a pic of the valve covers? are the center bolt or side bolt?

The chrome covers are outter bolt. The black ones are center bolt. A second set is also center bolt and still bolted to the ZZ4.

[gchemist]

Pictures of other parts.

The K&N 4.5" filter will be available after I install the Ram Air Box. $45

A used 2.5 40 series Flowmaster $45 is also available.

[gchemist]

40 Series Flowmaster

[cjracing15]

Originally Posted by gchemist

The ding is right above the license plate. Look at the pictures. Looks like someone backed into the bumper with a hitch corner or something. I had no beef of leaving on my truck. I'm only changing it because of the 81-82 bumper for the ram airbox setup. I'll check into delivery.

Thanks

[old Rusty C10]

im going to pass on the valve covers i have a similar set

[poncho_villa]

"The K&N 4.5" filter will be available after I install the Ram Air Box. $45"

Can you tell us more about this Ram Air Box??? Maybe start a new thread elsewhere on the forums. I think there would be a bunch of us interested in the details.

[gchemist]

I have not updated the ram air box setup in a while. I've been very busy with school. Graduation is Saturday. I hope to have more free time now to work on my truck. I plan to install the exhaust system this week. Next is a fine tune the carb and complete the ram air box installation. The ZZ4 with the 4.5 filter works very good. The ZZ4 has no problem lighting up the tires at less than mid throttle!!

Follow the Video link in my signature. One of the videos has a front view with the engine running and good view of the 81-82 modified bumper. I am asking the muffler shop to cut the holes. The hole saws are too much work.

[gchemist]

Updated list

[xtreme80]

Just wanted to post here and let everyone know that gchemist has been great with shipping me the parts I needed. Awesome seller!