It has begun... again... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AceX · 11-24-2007, 06:24 AM

I don't know how, but I've managed to dig myself into yet another financial hole...

It all started last Wednesday at a customer appreciation event at the stereo shop that I frequent here in Sacramento. Dad and I went that night to support the shop owner and I was trying to convince him to do a system in his '06 GMC Sierra.

When we got to the shop, the CEO of ARC Audio was outside with his new Shelby Mustang. He and dad started talking for a while while I went in and talked to one of the guys from the shop to see if we couldn't team up on my dad.

A little time passes and Demitirios (the CEO) and I got to talking about ARC's lineup for the coming year and what might work in my truck. We threw around a few ideas and finally he took a short walk outside to check out the truck. He must have liked what he saw because he wants it in his booth for the Sacramento Autorama this year.

Now we're going to replace my entire system and take everything from my truck and put it in the '06 Sierra.

On top of taking the system to a whole 'nother level, we're going to repair/rework the interior of my truck. All new door panels, bezels, trim, carpet, basically everything but the dash pad, pillar panels, and headliner... Also, every square inch of the interior will receive the Dynamat and where Dynamat can't reach, Special silicones and caulks will do the job...

The new system that's going in my truck is going to be a little over the top;

(4) ARC 10D2's
(3) ARC 6000 component sets
(1) ARC PEQ 7-band equalizer
(1) KS500.1 monoblock amplifier
(1) KS300.4 4ch amplifier

So say "bye" to my beloved stereo, for in a week, it will be no more...

Pyrotechnic · 11-24-2007, 11:39 AM

Nice! I guess they helping you out with some kind of endorsement or promotional deal ?

Malo83 · 11-24-2007, 01:51 PM

Now that sounds like a Great Deal

, is this a 1 time deal or possible show circuit tour for the truck

AceX · 11-25-2007, 02:32 AM

So far it is just the one show here in Sacramento, which is their biggest show of the year, but they may want more. The truck will probably be done by the time CES rolls around, but I doubt that they would take my truck to Vegas.

I'm hoping to hit alot of shows in 2008, so we'll see what kind of support I'll be getting.

I found out that the component sets that are going in my truck are some of the first to come off the line. I'll be one of the first people to have these speakers...

Mr79C10 · 11-25-2007, 07:45 AM

In this day of age,, EVERY lil bit helps out!!
Good deal.

Ya can send used donations my way. lol

AceX · 12-01-2007, 07:24 PM

Truck went into the shop about 3 hours ago and is being stripped. Probably gonna be a good 3-4 weeks before I can have her back. Brothers Trucks back ordered ALOT of MAJOR parts on me, so I'm probably gonna be behind when I get the truck back...

**old Rusty C10** · 12-01-2007, 08:30 PM

well congrats on getting this kind of recognition enjoy the limelight while you have it you may even get a photo review or something in an audio mag out of it

72BlckButy · 12-01-2007, 08:40 PM

Progress is progress, and you don't even have to do the work!

Be sure to post pics with what they do. They are putting a lot of components in there, but it will sound killer when it's done!

AceX · 12-02-2007, 03:55 AM

Quote:

Originally Posted by old Rusty C10

well congrats on getting this kind of recognition enjoy the limelight while you have it you may even get a photo review or something in an audio mag out of it

Hopefully... If people like it enough... All I can do is build my truck as best I can. If that's not enough then so be it. I'm not out to please anyone but myself...

AceX · 12-05-2007, 06:23 PM

Went by the shop today to get everything worked out with my dad's truck. It goes in tomorrow.

It looks like a long road ahead for my truck. Right now I've got to decide how to spend the budget that's been set. Do I take the Dynamat to the extreme, or do I cut back on it a bit and add a battery or two...?

Decisions decisions. Plus the shop just got another large project in that has to be done by Thursday, so my truck won't even get started till Friday or Saturday...

AceX · 12-21-2007, 02:17 PM

Work on the truck is continuing. Having issues with back ordered parts...

abebummy26 · 12-21-2007, 03:31 PM

That will be sweet.

AceX · 01-13-2008, 11:49 PM

System is done and playing. Just a few things to tidy up and the last bit of fabrication is left.

The truck is loud. Very loud. One of the guys at the shop estimated that it could hit over 135dB playing music. Just a reference, a 737 taxiing down the runway, is 120dB.

Hopefully I can get some pics up tomorrow. All I have right now are the ones on my phone and they aren't very high quality.

Ken, if you're reading this, I have you to thank for one of the coolest ideas in the system. You'll see why tomorrow.

11-24-2007, 06:24 AM	#1
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	It has begun... again... I don't know how, but I've managed to dig myself into yet another financial hole... It all started last Wednesday at a customer appreciation event at the stereo shop that I frequent here in Sacramento. Dad and I went that night to support the shop owner and I was trying to convince him to do a system in his '06 GMC Sierra. When we got to the shop, the CEO of ARC Audio was outside with his new Shelby Mustang. He and dad started talking for a while while I went in and talked to one of the guys from the shop to see if we couldn't team up on my dad. A little time passes and Demitirios (the CEO) and I got to talking about ARC's lineup for the coming year and what might work in my truck. We threw around a few ideas and finally he took a short walk outside to check out the truck. He must have liked what he saw because he wants it in his booth for the Sacramento Autorama this year. Now we're going to replace my entire system and take everything from my truck and put it in the '06 Sierra. On top of taking the system to a whole 'nother level, we're going to repair/rework the interior of my truck. All new door panels, bezels, trim, carpet, basically everything but the dash pad, pillar panels, and headliner... Also, every square inch of the interior will receive the Dynamat and where Dynamat can't reach, Special silicones and caulks will do the job... The new system that's going in my truck is going to be a little over the top; (4) ARC 10D2's (3) ARC 6000 component sets (1) ARC PEQ 7-band equalizer (1) KS500.1 monoblock amplifier (1) KS300.4 4ch amplifier So say "bye" to my beloved stereo, for in a week, it will be no more... __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

11-24-2007, 11:39 AM	#2
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: It has begun... again... Nice! I guess they helping you out with some kind of endorsement or promotional deal ?

11-24-2007, 01:51 PM	#3
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: It has begun... again... Now that sounds like a Great Deal , is this a 1 time deal or possible show circuit tour for the truck

11-25-2007, 02:32 AM	#4
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: It has begun... again... So far it is just the one show here in Sacramento, which is their biggest show of the year, but they may want more. The truck will probably be done by the time CES rolls around, but I doubt that they would take my truck to Vegas. I'm hoping to hit alot of shows in 2008, so we'll see what kind of support I'll be getting. I found out that the component sets that are going in my truck are some of the first to come off the line. I'll be one of the first people to have these speakers... __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

11-25-2007, 07:45 AM	#5
Mr79C10 It Is What It Is,,,, Join Date: Aug 2006 Location: The Gun Shine StateFlorida* Posts: 1,765	Re: It has begun... again... In this day of age,, EVERY lil bit helps out!! Good deal. Ya can send used donations my way. lol __________________ 79 C10 Short Box ST8 6 bang'r Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT __--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............\|_(O)_ \|___(O) ] FAQ INDEX Thread The Kulture My Rat Den

12-01-2007, 07:24 PM	#6
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: It has begun... again... Truck went into the shop about 3 hours ago and is being stripped. Probably gonna be a good 3-4 weeks before I can have her back. Brothers Trucks back ordered ALOT of MAJOR parts on me, so I'm probably gonna be behind when I get the truck back... __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

12-01-2007, 08:30 PM	#7
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: It has begun... again... well congrats on getting this kind of recognition enjoy the limelight while you have it you may even get a photo review or something in an audio mag out of it __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-01-2007, 08:40 PM	#8
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: It has begun... again... Progress is progress, and you don't even have to do the work! Be sure to post pics with what they do. They are putting a lot of components in there, but it will sound killer when it's done! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-05-2007, 06:23 PM	#10
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: It has begun... again... Went by the shop today to get everything worked out with my dad's truck. It goes in tomorrow. It looks like a long road ahead for my truck. Right now I've got to decide how to spend the budget that's been set. Do I take the Dynamat to the extreme, or do I cut back on it a bit and add a battery or two...? Decisions decisions. Plus the shop just got another large project in that has to be done by Thursday, so my truck won't even get started till Friday or Saturday... __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

12-21-2007, 02:17 PM	#11
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: It has begun... again... Work on the truck is continuing. Having issues with back ordered parts... __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

12-21-2007, 03:31 PM	#12
abebummy26 Registered User Join Date: Sep 2006 Location: New Haven, MO Posts: 1,243	Re: It has begun... again... That will be sweet. __________________ -Lincoln 1987 GMC S15 (soon to be a chevy clone) 2.5l, 4 speed, no ps, no pb, no ac Silence is golden, but duct tape is silver. Spoken by Cletus the hillbilly I like stickers... a whole bunch.

01-13-2008, 11:49 PM	#13
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: It has begun... again... System is done and playing. Just a few things to tidy up and the last bit of fabrication is left. The truck is loud. Very loud. One of the guys at the shop estimated that it could hit over 135dB playing music. Just a reference, a 737 taxiing down the runway, is 120dB. Hopefully I can get some pics up tomorrow. All I have right now are the ones on my phone and they aren't very high quality. Ken, if you're reading this, I have you to thank for one of the coolest ideas in the system. You'll see why tomorrow. __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.