The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-05-2008, 02:27 AM   #1
Duro5341
Registered User
 
Duro5341's Avatar
 
Join Date: Dec 2006
Location: Earth
Posts: 239
Re: 2 inch lift question

I upgraded my k10 to 3/4 ton springs, 7/1 overload springs in the rear, and 3 leafs in the front. It lifted the rear 3.5", and the front 2.25" in the front. Yes it does ride like a lumber wagon, but I can put a ton in the rear, and it'll sit level. I didn't have to modify anything, just bolt in the new spring packs, with new u-bolts, and shackle bolts, do a quick toe-set, and I was driving down the roar

Mine is a 350, with the TH400, 1 piece driveshaft, to a 10 bolt rear-end

Thanks
Duro
__________________
-1986 K10 LWB, 350 HD,TH400
3.08, 30 spline 10 bolt, with an Auburn Posi, 31" tires
All original, second owner truck
-1979 Monte Carlo, 350, 200r4, 3.73 posi
-1987 GT T-top Mustang - slow moving project
Duro5341 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com