|
03-11-2008, 05:24 AM
|
#26 |
|
ran out of money
Join Date: Apr 2003
Location: northern, NJ
Posts: 925
|
Re: Advice needed
i looked it up the part number for a 71 chevy with a 12 bolt is SAG-PA5569 and they list for 99.95 each... not to bad since i emailed moser and they said it would be 325 for both alxes plus shipping
__________________
Modify everything, leave nothing alone!~  
|
|
|
|
03-11-2008, 05:27 AM
|
#27 |
|
ran out of money
Join Date: Apr 2003
Location: northern, NJ
Posts: 925
|
Re: Advice needed
Couch: are you able to put c-clip eliminators on your axle. cause from what ive been reading everyone says that stock axles need machineing to work with their c-clip elim.s
__________________
Modify everything, leave nothing alone!~
|
|
|
|
|
03-11-2008, 08:30 AM
|
#28 | |
|
Daily Driver
Join Date: Jul 2007
Location: fresno,ca
Posts: 228
|
Re: Advice needed
Quote:
the superiors were like 250ish shipped.
__________________
nitrous...the equal opportunity destroyer. |
|
|
|
|
|
03-11-2008, 08:40 AM
|
#29 |
|
Registered User
Join Date: May 2003
Location: Ontario
Posts: 279
|
Re: Advice needed
not trying to hijack or anything,but is it possible to put Ford ends on a truck 12 bolt? That would eliminate the c-clips,I need to shorten mine 4 inches on each side and If that would work it would save having to use the eliminators.Thanks
|
|
|
|
|
03-20-2008, 05:02 AM
|
#30 |
|
fugedaboutit
 
Join Date: Mar 2005
Location: Gresham, OR
Posts: 832
|
Re: Advice needed
Ok next Qs - I took everyones advice and am having 3.73s installed tomorrow along with my mini spool. I got my hoosier 28x10 and some 8" rallies all painted up and ready to go to the tire shop and have them put on. Do you all recommend I put the screws thru the wheels to prevent wheel spin? Or do I need to worry about it with the minimal amount of power Im runnin?
__________________
Currently truckless 
|
|
|
|
|
03-20-2008, 05:52 AM
|
#31 |
|
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
Re: Advice needed
I wouldn't worry about it
__________________
Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs |
|
|
|
|
03-20-2008, 07:24 AM
|
#32 |
|
Registered User
Join Date: Nov 2007
Location: Bay Area, Ca
Posts: 2,841
|
Re: Advice needed
Try it with out. You can pick up some white shoe polish, draw a line at the valve stem. Have a buddy video the launch and focus on the tire for 1 or 2 of them.. This will tell you few things, 1) Are you getting tire spin 2) Any wheel hop 3) if your tire is slipping on the rim.
|
|
|
|
|
03-20-2008, 07:29 AM
|
#33 |
|
fugedaboutit
Join Date: Mar 2005
Location: Gresham, OR
Posts: 832
|
Re: Advice needed
cool.. thanks I will try it without them.
__________________
Currently truckless
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
