Parting 78 Gmc Dually* - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BBEEP · 03-04-2008, 02:11 AM

Quote:

Originally Posted by hessian18

Im about 30 minutes from Redding..

How much would you like for the dash pad ?? And how is its condition ?

Thanks

I do want to get the seat and the dash pad..

Seat $100, nice but a little dirty. Dash has very minimal cracks. Between speaker holes and one about 1/2 inch between one defrost & windshield, also dirty. Can bring to Kool April Nites for $200 both pieces delivered. But you need to pay before I load, only cause I don't want to haul them for a no-show. You understand I hope.

**too much stuff** · 03-04-2008, 03:32 AM

So, are the door panels available?

BBEEP · 03-04-2008, 07:14 AM

Door panels sold to the first guy who contacted me. He "pm'd" me before anyone asked through the forum. Wish I had 6 sets! since I don't know anyone, it goes to the first, ya know!
John

**jerry moss** · 03-04-2008, 08:32 AM

John,
nice talking to you, payment is on it's way. thanks.

manimal · 03-05-2008, 05:11 PM

Quote:

Originally Posted by BBEEP

Looked on ebay. Seem to go for $150 to $600, plus $50 to $150 for the chrome. Shipping appears around $50 to $60 dollars. I'll have to look in to that. How about $150 plus shipping? I'll go take pics if you're actually interested.

I am waiting to see if I sell my '79 F250,if so then I will pm you about it. Thanks
-Lance

BBEEP · 03-06-2008, 05:54 AM

Still have a lot of nice sheet metal!!

Bumper w/guards, doors, front clip, even one good passenger dually fender, bed, 5th wheel tailgate. Any interest?

Mr79C10 · 03-06-2008, 02:48 PM

Do you have the lower grill trim piece?

manimal · 03-06-2008, 07:14 PM

Hoping to hear back from the guy today on the truck I have for sale....Then I want that rear fender.Thanks
-Lance

BBEEP · 03-06-2008, 10:00 PM

Quote:

Originally Posted by manimal

Hoping to hear back from the guy today on the truck I have for sale....Then I want that rear fender.Thanks
-Lance

Lance,
Again, first come first served. I have somoen that wants both rear fenders. Whoever says go first, of course.
Anyway, pics:
break in the back of the drivers side, scratch on the upper rear of the passenger side. nice trim. $225 pair plus ride.

BBEEP · 03-06-2008, 10:03 PM

Quote:

Originally Posted by Mr79C10

Do you have the lower grill trim piece?

Yup, pics:
Only rust I could find was in the front of the hood. I think there used to be a plastic bug screen (leaf collector!)

BBEEP · 03-07-2008, 05:34 AM

Passenger fender has a 2 by 2 piece pictured that is broken in the shape of a sideways "V" near the light, still attached. The drivers side has a piece missing on the bottom rear about 3 by 6 and a hole the size of a pencil near the marker light.

An offer won't offend me.

manimal · 03-07-2008, 10:11 AM

I think I will pass. Thanks anyway.
-Lance

mexgrhd68 · 03-11-2008, 11:26 AM

Quote:

Originally Posted by BBEEP

Frame running gear under my 50 GMC Bus. Nearly rust free (if it was east coast you might call it 100% n.o.s.!) Everything cheap!

BBEEP, I need the A/C vents along with the insert that goes in the dash(middle vent and passenger vent) how much to visalia,california 93277

BBEEP · 03-13-2008, 12:58 AM

Do You Need The Ducting As Well?

mexgrhd68 · 03-13-2008, 01:04 AM

Quote:

Originally Posted by BBEEP

Do You Need The Ducting As Well?

no, thanks.

BBEEP · 03-14-2008, 06:05 PM

Dually rear end available. $300. It was too wide for the bus. Used a spicer dually that was 8 inches narrower and actually used the same spring perches!

BBEEP · 03-18-2008, 09:41 AM

Quote:

Originally Posted by mexgrhd68

no, thanks.

I'll check to see what they look like & get back to you

mexgrhd68 · 03-20-2008, 12:05 PM

Quote:

Originally Posted by BBEEP

I'll check to see what they look like & get back to you

great!!

BBEEP · 03-30-2008, 12:35 AM

DIFFERENTIAL SOLD!

BBEEP · 03-31-2008, 04:27 AM

Quote:

Originally Posted by mexgrhd68

BBEEP, I need the A/C vents along with the insert that goes in the dash(middle vent and passenger vent) how much to visalia,california 93277

You wouldn't want them.

yosemitesamiam · 05-20-2008, 04:59 AM

How about a driver door and camping mirror?

ed3196499 · 05-21-2008, 10:04 PM

are parts still available? I am looking for some fender emblems

BBEEP · 05-21-2008, 11:10 PM

All sheet metal available. I believe it still has the emblems. Drivers door very nice w/mirror. I want $500 for whats left. Dash seat chassis gone.

03-04-2008, 03:32 AM	#27
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,789	Re: Parting 78 Gmc Dually So, are the door panels available? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-04-2008, 07:14 AM	#28
BBEEP Junior Member Join Date: Feb 2005 Location: EUGENE, OREGON Posts: 504	Re: Parting 78 Gmc Dually Door panels sold to the first guy who contacted me. He "pm'd" me before anyone asked through the forum. Wish I had 6 sets! since I don't know anyone, it goes to the first, ya know! John Last edited by BBEEP; 03-04-2008 at 07:16 AM.

03-04-2008, 08:32 AM	#29
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,941	Re: Parting 78 Gmc Dually John, nice talking to you, payment is on it's way. thanks. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA Last edited by jerry moss; 03-05-2008 at 12:06 AM.

03-06-2008, 05:54 AM	#31
BBEEP Junior Member Join Date: Feb 2005 Location: EUGENE, OREGON Posts: 504	Re: Parting 78 Gmc Dually Still have a lot of nice sheet metal!! Bumper w/guards, doors, front clip, even one good passenger dually fender, bed, 5th wheel tailgate. Any interest?

03-06-2008, 02:48 PM	#32
Mr79C10 It Is What It Is,,,, Join Date: Aug 2006 Location: The Gun Shine StateFlorida* Posts: 1,765	Re: Parting 78 Gmc Dually Do you have the lower grill trim piece? __________________ 79 C10 Short Box ST8 6 bang'r Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT __--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............\|_(O)_ \|___(O) ] FAQ INDEX Thread The Kulture My Rat Den

03-06-2008, 07:14 PM	#33
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: Parting 78 Gmc Dually Hoping to hear back from the guy today on the truck I have for sale....Then I want that rear fender.Thanks -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

03-07-2008, 05:34 AM	#36
BBEEP Junior Member Join Date: Feb 2005 Location: EUGENE, OREGON Posts: 504	Re: Parting 78 Gmc Dually Passenger fender has a 2 by 2 piece pictured that is broken in the shape of a sideways "V" near the light, still attached. The drivers side has a piece missing on the bottom rear about 3 by 6 and a hole the size of a pencil near the marker light. An offer won't offend me.

03-07-2008, 10:11 AM	#37
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: Parting 78 Gmc Dually I think I will pass. Thanks anyway. -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

03-13-2008, 12:58 AM	#39
BBEEP Junior Member Join Date: Feb 2005 Location: EUGENE, OREGON Posts: 504	Re: Parting 78 Gmc Dually Do You Need The Ducting As Well?

03-14-2008, 06:05 PM	#41
BBEEP Junior Member Join Date: Feb 2005 Location: EUGENE, OREGON Posts: 504	Re: Parting 78 Gmc Dually Dually rear end available. $300. It was too wide for the bus. Used a spicer dually that was 8 inches narrower and actually used the same spring perches! Last edited by BBEEP; 03-14-2008 at 06:06 PM.

03-30-2008, 12:35 AM	#44
BBEEP Junior Member Join Date: Feb 2005 Location: EUGENE, OREGON Posts: 504	Re: Parting 78 Gmc Dually* DIFFERENTIAL SOLD!

05-20-2008, 04:59 AM	#46
yosemitesamiam Registered User Join Date: Oct 2007 Location: Glendora, CA Posts: 34	Re: Parting 78 Gmc Dually* How about a driver door and camping mirror? __________________ 1976 GMC C25 High Sierra Camper Special. 350/TH350

05-21-2008, 10:04 PM	#47
ed3196499 Registered User Join Date: Mar 2007 Location: New Orleans La Posts: 125	Re: Parting 78 Gmc Dually* are parts still available? I am looking for some fender emblems __________________ Ed U.S. Coast Guard BMC (retired)

05-21-2008, 11:10 PM	#48
BBEEP Junior Member Join Date: Feb 2005 Location: EUGENE, OREGON Posts: 504	Re: Parting 78 Gmc Dually* All sheet metal available. I believe it still has the emblems. Drivers door very nice w/mirror. I want $500 for whats left. Dash seat chassis gone.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.