how to wire bag switch(s) NSANE or XXL? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jay-dawg · 01-31-2003, 08:54 PM

Hi guys,
I'm installing my bags for my s10. Just wanted to know what I need to wire an "ALL UP" switch for my bags. How about for just the two fronts at the same time? I will have independent front controls and the back is teed. How do I do that type of switch? What kind of switch should I look for?

Thanks in advance,
Jay

guitarman · 02-01-2003, 10:14 AM

Power window switches will work great but they are pricey unless you pick them up at a salvage yard. They are momentary on in either direction with off in the middle. Hope this helps.

jay-dawg · 02-01-2003, 01:04 PM

thanks guitarman. So I just need to hook up all the power wires from the solenoids to the switch?

GMC JUNKIE TOO · 02-01-2003, 10:34 PM

For an all up or all down you will need to wire all of the valves to the same switch, and just wire the two to one switch for the front.

01-31-2003, 08:54 PM	#1
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	how to wire bag switch(s) NSANE or XXL? Hi guys, I'm installing my bags for my s10. Just wanted to know what I need to wire an "ALL UP" switch for my bags. How about for just the two fronts at the same time? I will have independent front controls and the back is teed. How do I do that type of switch? What kind of switch should I look for? Thanks in advance, Jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

02-01-2003, 10:14 AM	#2
guitarman Do it well or don't do it Join Date: Apr 2002 Location: Georgia Posts: 457	Power window switches will work great but they are pricey unless you pick them up at a salvage yard. They are momentary on in either direction with off in the middle. Hope this helps. __________________ Try to be the person your dog thinks you are. Excellent paint and body site: http://www.autobody101.com/ Visit my Web Site http://home.attbi.com/~agfosteriii

02-01-2003, 01:04 PM	#3
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	thanks guitarman. So I just need to hook up all the power wires from the solenoids to the switch? __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-01-2003, 10:34 PM	#4
GMC JUNKIE TOO THE QUICKER FIXERUPER Join Date: Jul 2002 Location: Ok Posts: 615	For an all up or all down you will need to wire all of the valves to the same switch, and just wire the two to one switch for the front.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.