Maybe Lower

[leftcoast66]

Originally Posted by bdydrp97s10

a bodydrop??? IMO would be out of the question for your application.. it is alot of work..

In short, you have to cut the floor of the cab outside of the framerail and lower the body. and you have to cut the frame horns and lower the entire radiator support with the cab. and teh same for the bed..

its just too much work for a few inches if your not going to put it all the way on the ground..

I would do air ride first

I agree on airride first, but a stock floor bodydrop isn't that hard on these trucks. Under the cab you can get a little over an inch if I remember right by lowering cab mounts.