The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-02-2000, 07:18 PM   #1
kerwinq
Registered User
 
Join Date: Jun 2000
Location: boise, id
Posts: 8
Post Transmission question

Can anyone tell me the difference between a TH400 and TH350. Is one better than the other? I am going to be putting a 350 in a 85 1/2 ton that currently has a V6 with the TH400.
Any thoughts would be appreciated.

Thanks, Kerwin
kerwinq is offline   Reply With Quote
Old 10-03-2000, 07:00 PM   #2
87CHEVY
Registered User
 
Join Date: Mar 2000
Location: Midwest City, OK
Posts: 51
Post

I think the TH400 is supposed to be stronger than the TH350. Is the v-6 stock? A weird combo!

------------------
1987 1/2 Ton Silverado, 350, 454 TBI unit w/ injector spacers, ADS Superchip, K&N air filter, Terminator muffler, 700R4, 3.08 gears .... come and see it at 87Chevy'sTruckinPage


__________________
1987 1/2 Ton Silverado, 350, 454 TBI unit w/ injector spacers, ADS Superchip, K&N air filter, Terminator muffler, 700R4, 3.08 gears .... come and see it at 87Chevy'sTruckinPage


87CHEVY is offline   Reply With Quote
Old 10-03-2000, 07:31 PM   #3
kerwinq
Registered User
 
Join Date: Jun 2000
Location: boise, id
Posts: 8
Post

Yes, as far as I know the V6 is original, it's in a 1985 GMC. I think it's the TH400 trans, I'm going by what the pan looks like and the modulator on the side. Unless it is possibly something else??

Thanks, Kerwin
kerwinq is offline   Reply With Quote
Old 10-03-2000, 10:11 PM   #4
swervin ervin
You get what you pay for
 
swervin ervin's Avatar
 
Join Date: Dec 1999
Location: Cherryville, NC
Posts: 4,798
Post

It's a 700R4. It's an overdrive tranny, right? If it's a square pan, it's a 700R4.

No 85 1/2 tons came with V-6's and TH400's. The auto options were TH350C's 3 speed, and 700R4's 4 speed.

Keep the 700R4 with the 350. A great combo. Of course the 85 700 is not as good as the later years. Mine went out and I replaced it with one from a 89. The mid 88 thru 92's are the best years.

------------------
Mike

1985 Chevy C-10
Mike's 73-87 Chevy Pickup Site

[This message has been edited by swervin ervin (edited 10-03-2000).]
__________________
Mike

1985 Chevy C-10
swervin ervin is offline   Reply With Quote
Old 10-04-2000, 05:49 AM   #5
72BBGMC
Senior Member
 
Join Date: Jun 2000
Location: georgia
Posts: 292
Post

A 700R4 wouldn't have a modulator on it.Also what size V6,the bell housing is different on a 2.8 V6. The 4.3 V6 is the same as a V8.
72BBGMC is offline   Reply With Quote
Old 10-04-2000, 05:47 PM   #6
swervin ervin
You get what you pay for
 
swervin ervin's Avatar
 
Join Date: Dec 1999
Location: Cherryville, NC
Posts: 4,798
Post

There were no 2.8 V-6's in 85 C-10's. If it is a V-6, it is a 4.3, so the tranny will fit a V-8.

------------------
Mike

1985 Chevy C-10
Mike's 73-87 Chevy Pickup Site

[This message has been edited by swervin ervin (edited 10-04-2000).]
__________________
Mike

1985 Chevy C-10
swervin ervin is offline   Reply With Quote
Old 10-05-2000, 10:35 PM   #7
Hawk
Registered User
 
Join Date: Sep 2000
Location: East TN
Posts: 294
Post

Well I don't know what in the crap came on who in whichever year. Your question was which is better the 400 or the 350. Well, the 400 is a 'ell of a lot tougher transmission. I used mine for heavy pullin' and well, I ate up the 350's two of 'em as a matter of fact. So I had a 400 built, and now I spent some cash on her, but she never skipped a beat, and was runnin' strong when I sold her. The 400 was a great transmission, the 350 was very weak, of course thats just my experience. Mine was in '78 GMC swb, 4x4. I used mine for a little fun, and a lot of heavy hauling.
Hope this helps
See ya'


------------------
1967 K-10, swb,4sp 4wd, power nothin'.....man is she in need of lots of help!!

[This message has been edited by Hawk (edited 10-05-2000).]
__________________
Cab on the frame..............one step ata' time folks.
Bristol, TN
67 K10 swb, fleetside
Hawk is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com