While I'm in there...? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cdowns · 10-10-2008, 03:55 PM

yes it needs to b lifted up about2-3"///take the dipstick out too when removing pan

brad_man_72 · 10-10-2008, 03:58 PM

i didnt have to lift mine, i was checking rod bearings.
i think i have 6 cyl mounts

10-10-2008, 03:55 PM	#1
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: While I'm in there...? yes it needs to b lifted up about2-3"///take the dipstick out too when removing pan __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-10-2008, 03:58 PM	#2
brad_man_72 the boat guy Join Date: Jul 2007 Location: springfield mo Posts: 2,339	Re: While I'm in there...? i didnt have to lift mine, i was checking rod bearings. i think i have 6 cyl mounts __________________ 67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project,

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.