Bed Strip Bolt Sizes? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kyull67 · 01-12-2009, 09:30 PM

Does anyone know what size carriage bolts I need for the bed strips in a '67 with a wood bed?

**LockDoc** · 01-12-2009, 09:42 PM

-
Well Kyull, If it we weren't getting a blizzard right now I would go out and measure mine for you. I'd probably never find my way back to the house..

.. I'm thinking 5/16" x 1 1/4" but don't buy any until someone verifies it...

LockDoc

kyull67 · 01-12-2009, 09:47 PM

Thanks for the attempt, I'm sure someone will let us know.

kyull67 · 01-13-2009, 09:12 AM

ttt

BIGMAC68 · 01-13-2009, 09:20 AM

The very front bolt near the front bed panel is 5/16-18 x 1-1/2" carriage. All other bolts in the long strips are 1/4-20 x 1-1/4". The short strips in front and back of the wheel house have a mixture of these two sizes. The front one has 5/16 on each end. The rear short strip has 5/16 on the wheel house end only.

BIGMAC68 · 01-13-2009, 09:23 AM

I read your question again and realized that you did not mention it was a fleetside or step bed. The advice posted was for a fleet. If it is a stepper, Then the front bolt is 5/16 and the rest are 1/4". The angle strips on a stepper are 5/16 as well.

kyull67 · 01-13-2009, 11:40 AM

It is for a short step. Thanks for the info!

01-12-2009, 09:30 PM	#1
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Bed Strip Bolt Sizes? Does anyone know what size carriage bolts I need for the bed strips in a '67 with a wood bed? Attached Images __________________ The first '67 The current '67 '63 Biscayne

01-12-2009, 09:42 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 26,083	Re: Bed Strip Bolt Sizes? - Well Kyull, If it we weren't getting a blizzard right now I would go out and measure mine for you. I'd probably never find my way back to the house.... I'm thinking 5/16" x 1 1/4" but don't buy any until someone verifies it... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

01-12-2009, 09:47 PM	#3
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Bed Strip Bolt Sizes? Thanks for the attempt, I'm sure someone will let us know. __________________ The first '67 The current '67 '63 Biscayne

01-13-2009, 09:12 AM	#4
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Bed Strip Bolt Sizes? ttt __________________ The first '67 The current '67 '63 Biscayne

01-13-2009, 09:20 AM	#5
BIGMAC68 Registered User Join Date: Oct 2005 Location: Tuttle Oklahoma Posts: 162	Re: Bed Strip Bolt Sizes? The very front bolt near the front bed panel is 5/16-18 x 1-1/2" carriage. All other bolts in the long strips are 1/4-20 x 1-1/4". The short strips in front and back of the wheel house have a mixture of these two sizes. The front one has 5/16 on each end. The rear short strip has 5/16 on the wheel house end only.

01-13-2009, 09:23 AM	#6
BIGMAC68 Registered User Join Date: Oct 2005 Location: Tuttle Oklahoma Posts: 162	Re: Bed Strip Bolt Sizes? I read your question again and realized that you did not mention it was a fleetside or step bed. The advice posted was for a fleet. If it is a stepper, Then the front bolt is 5/16 and the rest are 1/4". The angle strips on a stepper are 5/16 as well.

01-13-2009, 11:40 AM	#7
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Bed Strip Bolt Sizes? It is for a short step. Thanks for the info! __________________ The first '67 The current '67 '63 Biscayne

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.