The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-14-2009, 11:47 PM   #1
pissonNOS
senior member
 
pissonNOS's Avatar
 
Join Date: Feb 2003
Location: fort macleod alberta
Posts: 2,770
can i get some tire assistance please (sizing)

ok im considering going to a set of 18's and im trying to figure out what size tire i would need to be compareable to what i have now, it could just be me but im having troubles trying to figure this out by looking at some size and spec sheets, I just used the ones from bf goodrich. Currently I am running 245-60-15's on the front which is 26.6 inches tall and 275-60-15's on the rear which is 28" tall can some one help me out here im kinda lost
Jason
__________________
69 GMC bagged
pissonNOS is offline   Reply With Quote
Old 01-15-2009, 12:28 AM   #2
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
Re: can i get some tire assistance please (sizing)

245-45-18's = 26.68
295-45-18's = 28.45
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 01-15-2009, 08:19 AM   #3
tiggamonsta
Registered User
 
tiggamonsta's Avatar
 
Join Date: Aug 2008
Location: Cedar Creek, TX
Posts: 167
Re: can i get some tire assistance please (sizing)

I use this all the time. It put's a nice visual on the differences in tire size.

http://www.miata.net/garage/tirecalc.html
tiggamonsta is offline   Reply With Quote
Old 01-15-2009, 11:51 AM   #4
chevy_mike
Never Ending Projects
 
chevy_mike's Avatar
 
Join Date: Jul 2006
Location: San Diego, CA
Posts: 3,836
Re: can i get some tire assistance please (sizing)

Quote:
Originally Posted by SCOTI View Post
245-45-18's = 26.68
295-45-18's = 28.45
x2

I was just looking at this info yesterday, doing some research.
__________________
.
1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD
1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD
1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD


We were given two ears and one mouth for a reason... listen twice as much and speak half as often...
chevy_mike is offline   Reply With Quote
Old 01-15-2009, 01:12 PM   #5
Eighty-6
Registered User
 
Join Date: Jul 2008
Location: Round Rock, Tx
Posts: 249
Re: can i get some tire assistance please (sizing)

Quote:
Originally Posted by pissonNOS View Post
ok im considering going to a set of 18's and im trying to figure out what size tire i would need to be compareable to what i have now, it could just be me but im having troubles trying to figure this out by looking at some size and spec sheets, I just used the ones from bf goodrich. Currently I am running 245-60-15's on the front which is 26.6 inches tall and 275-60-15's on the rear which is 28" tall can some one help me out here im kinda lost
Jason
Excellent post! I'm actually looking for the same information. I just got some Boss 338's and am looking for the best tire size on a 2.5\4 drop.

Quote:
Originally Posted by SCOTI View Post
245-45-18's = 26.68
295-45-18's = 28.45
Scoti what brand tire to you recommend. Not looking to send to much coin and the truck in not a DD but do want decent performance.

Thanks,
Eighty-6 is offline   Reply With Quote
Old 01-15-2009, 03:22 PM   #6
pissonNOS
senior member
 
pissonNOS's Avatar
 
Join Date: Feb 2003
Location: fort macleod alberta
Posts: 2,770
Re: can i get some tire assistance please (sizing)

thanks alot guys!! im assuming if i get the right back spacing i can still use this same set up with my airride
__________________
69 GMC bagged
pissonNOS is offline   Reply With Quote
Old 01-15-2009, 03:56 PM   #7
chevy_mike
Never Ending Projects
 
chevy_mike's Avatar
 
Join Date: Jul 2006
Location: San Diego, CA
Posts: 3,836
Re: can i get some tire assistance please (sizing)

Quote:
Originally Posted by Eighty-6 View Post
Excellent post! I'm actually looking for the same information. I just got some Boss 338's and am looking for the best tire size on a 2.5\4 drop.



Scoti what brand tire to you recommend. Not looking to send to much coin and the truck in not a DD but do want decent performance.

Thanks,
You so have to post pics. I just found these the other day and I am so wanting a set with grey centers and knock offs.

What size did you get and are the offsets correct for 67-72 trucks?
__________________
.
1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD
1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD
1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD


We were given two ears and one mouth for a reason... listen twice as much and speak half as often...
chevy_mike is offline   Reply With Quote
Old 01-15-2009, 04:44 PM   #8
ulakovic22
Registered User
 
Join Date: Aug 2008
Location: Lantana, TX
Posts: 419
Re: can i get some tire assistance please (sizing)

I actually get this question a lot from the guy I work with. Here is the formula for a given tire size of 275/60/15

((275/25.4)*.60*2+15)
ulakovic22 is offline   Reply With Quote
Old 01-15-2009, 04:47 PM   #9
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
Re: can i get some tire assistance please (sizing)

Price wise the Falken line seems to offer many sizes @ a decent cost. For me personally, the only thing that matters is the size. I will pay more for the exact size I want vs. getting a cheaper tire that's not the right fit.

I have used & like: BFG's, Dunlop SP9000's, Toyos, Michelins, & Eagles.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:14 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com