Is this not a blazer part? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DURRTY · 01-22-2009, 08:23 PM

I need from the door to half way back to the wheel arch.(front quarter lower, on a blazer) This looks like what i need http://www.tri-proautomotive.com/ser...%2C-bed/Detail. But they list it as a pick up part.
It looks just like this part #23 http://www.lmctruck.com/icatalog/cb/full.aspx?Page=35.

To add confusion, could I use this #6 http://www.lmctruck.com/icatalog/cb/full.aspx?Page=25 and cut it in half since i don't need the wheel arch?? the price differences are obvious and don't want to spend a $100 if I can get away with 20 or so.
50 bucks for the blazer part and 19.00 for the truck part.
The pick up bedside is the same right?? it has to be... does anybody know anything that makes them different?

**Classic Heartbeat** · 01-22-2009, 09:46 PM

The difference in the part is the truck part is longer and the Blazer part also has a flange or ("L" bend) for the rear door pillar. WES

vtblazer · 01-23-2009, 07:27 AM

Two different parts in the way they have to mate in that area.

The leading edge will be totally different.

**1970cstblazer** · 01-23-2009, 10:05 AM

The bedsides on a SWB truck are the same on the rear half, but need to be shortened for use on a Blazer. I will be using a modified complete SWB truck bedside on my Blazer project.

vtblazer · 01-23-2009, 10:15 AM

Example:

**jaros44sr** · 01-23-2009, 10:24 AM

Hey Buddy, just wondering, is the radius on the eyebrow the same? Could be these tired old eyes, but they look different...

01-22-2009, 08:23 PM	#1
DURRTY USMC Join Date: May 2007 Location: SLc,UT Posts: 300	Is this not a blazer part? I need from the door to half way back to the wheel arch.(front quarter lower, on a blazer) This looks like what i need http://www.tri-proautomotive.com/ser...%2C-bed/Detail. But they list it as a pick up part. It looks just like this part #23 http://www.lmctruck.com/icatalog/cb/full.aspx?Page=35. To add confusion, could I use this #6 http://www.lmctruck.com/icatalog/cb/full.aspx?Page=25 and cut it in half since i don't need the wheel arch?? the price differences are obvious and don't want to spend a $100 if I can get away with 20 or so. 50 bucks for the blazer part and 19.00 for the truck part. The pick up bedside is the same right?? it has to be... does anybody know anything that makes them different? __________________ Semper Fi Last edited by DURRTY; 01-22-2009 at 09:17 PM.

01-23-2009, 07:27 AM	#3
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Is this not a blazer part? Two different parts in the way they have to mate in that area. The leading edge will be totally different.

01-23-2009, 10:05 AM	#4
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,839	Re: Is this not a blazer part? The bedsides on a SWB truck are the same on the rear half, but need to be shortened for use on a Blazer. I will be using a modified complete SWB truck bedside on my Blazer project. __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

01-23-2009, 10:15 AM	#5
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Is this not a blazer part? Example: Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-22-2009, 09:46 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Is this not a blazer part? The difference in the part is the truck part is longer and the Blazer part also has a flange or ("L" bend) for the rear door pillar. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

01-23-2009, 10:24 AM	#6
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: Is this not a blazer part? Hey Buddy, just wondering, is the radius on the eyebrow the same? Could be these tired old eyes, but they look different... __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.