|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-24-2008, 02:37 PM
|
#26 |
|
TexasBowhunter
Join Date: Mar 2008
Location: alvin, texas
Posts: 450
|
Re: Who makes center caps for 6 lugs ??
http://www.petepaulsen.com/
Go to accessories.... Go to bottom and click trim rings and center caps.
__________________
Build in progress for son's first truck. |
|
|
|
09-24-2008, 02:38 PM
|
#27 | |
|
TexasBowhunter
Join Date: Mar 2008
Location: alvin, texas
Posts: 450
|
Re: Who makes center caps for 6 lugs ??
Quote:
__________________
Build in progress for son's first truck. |
|
|
|
|
|
09-24-2008, 05:17 PM
|
#28 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Who makes center caps for 6 lugs ??
I don;t think bullet push through caps will work in the rear... There is 0 clearance between the axle hub and the wheel... I kinda dig the civic...
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
|
09-24-2008, 05:18 PM
|
#29 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Who makes center caps for 6 lugs ??
I don;t think bullet push through caps will work in the rear... There is 0 clearance between the axle hub and the wheel... I kinda dig the civic... I really dig 70 c10's truck!
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
|
09-24-2008, 05:45 PM
|
#30 | |||
|
Registered User
Join Date: Oct 2005
Location: redlands, ca
Posts: 112
|
Re: Who makes center caps for 6 lugs ??
Quote:
http://www.jalopyjournal.com/forum/s...hlight=paulsen http://www.jalopyjournal.com/forum/s...hlight=paulsen http://www.jalopyjournal.com/forum/s...hlight=paulsen http://www.jalopyjournal.com/forum/s...hlight=paulsen Quote:
Quote:
|
|||
|
|
|
|
10-04-2008, 01:26 PM
|
#31 |
|
Registered User
Join Date: Aug 2008
Location: santa clara ca
Posts: 47
|
Re: Who makes center caps for 6 lugs ??
truck is looking good i got me set at hub cap city on san carlos across from 4 wheel parts. i had to crimp the lip but theyre cool for the price
|
|
|
|
|
10-04-2008, 09:07 PM
|
#32 |
|
Hollister, CA.
 
Join Date: Sep 2006
Location: Hollister, Ca.
Posts: 6,150
|
Re: Who makes center caps for 6 lugs ??
What up kid.....post number 1 !!!
Welcome...my shop is in Santa Clara...where you located ? Got any pic of the caps ?
__________________
John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster  Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" |
|
|
|
|
10-04-2008, 09:51 PM
|
#33 |
|
Registered User
Join Date: Aug 2008
Location: santa clara ca
Posts: 47
|
Re: Who makes center caps for 6 lugs ??
yeah checkout my public profile still trying to get the hang of this im not to far from the university
__________________
making trucks pointless 1 at a time |
|
|
|
|
10-04-2008, 10:04 PM
|
#34 |
|
Keepin it old school
Join Date: Jul 2008
Location: Ca
Posts: 672
|
Re: Who makes center caps for 6 lugs ??
the kid: here you go just helpin out. pic of your truck from your profile
Last edited by Bazooka; 10-04-2008 at 10:05 PM. |
|
|
|
|
10-04-2008, 10:21 PM
|
#35 |
|
Registered User
Join Date: Aug 2008
Location: santa clara ca
Posts: 47
|
Re: Who makes center caps for 6 lugs ??
cool deal yeah those are them they're some where around 15-20 each or if you buy the set theyll give you a better price
__________________
making trucks pointless 1 at a time |
|
|
|
|
10-06-2008, 11:05 PM
|
#36 |
|
Zombie Killer
Join Date: Dec 2007
Location: Texas
Posts: 317
|
Re: Who makes center caps for 6 lugs ??
Here we go, here is the cap I ordered from MoonEyes. The base is slightly smaller (about 3 3/8" across) then the center holes on the stock rims so that's not a problem. They stand about 4" tall and look pretty cool. On the inside there is a stem with a hole that could be easily threaded with a tap. I haven't really studied how I could mount them but at a quick glance I'm thinking a stud could be welded to the rear axle and then screw on the cap. On the front 3 or 4 set screws could be used to secure it to the front rotor. The trick would be getting them centered so they don't wobble. They are also kinda heavy so they would need to be attached in a way that they don't go flying off when hitting bumps.
click pics for larger image.  
__________________
1964 C10 Long Step Last edited by sixtyfour; 10-06-2008 at 11:06 PM. |
|
|
|
|
10-07-2008, 02:29 AM
|
#37 |
|
Registered User
Join Date: Oct 2003
Location: Battleground, Washington
Posts: 177
|
Re: Who makes center caps for 6 lugs ??
My friend Dan has bullet centers and lugs on his truck. He is running 15x8's from Stockton Wheel.
[IMG]URL=http://rides.webshots.com/photo/2863995060065744574TaHBoz]  [/URL][/IMG]
__________________
'77 GMC SWB '66 SNB (Project) Battle Ground, WA |
|
|
|
|
02-21-2009, 05:35 AM
|
#38 |
|
Registered User
Join Date: Feb 2009
Location: Nuremberg, Germany
Posts: 88
|
Re: Who makes center caps for 6 lugs ??
hi folks,
i am new here (from germany) an have a 66 stepside. i am searching for 6 lug push through bullet caps too. i need a diameter from about 3,54" and think about trying the MOONEYES caps. does somebody have some experiences in mounting these ones? thanks alot for feedback. Andy ... 
|
|
|
|
|
02-21-2009, 08:38 AM
|
#39 |
|
Hollister, CA.
Join Date: Sep 2006
Location: Hollister, Ca.
Posts: 6,150
|
Re: Who makes center caps for 6 lugs ??
Welcome aboard Andy...NICE TRUCK !!!
Glad to have you on out site....you will meet alot of cool people, and learn alot !!!
__________________
John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" |
|
|
|
|
02-21-2009, 10:42 AM
|
#40 |
|
Hey Y'all!!
Join Date: Dec 2007
Location: Bay Minette, Alabama
Posts: 1,755
|
Re: Who makes center caps for 6 lugs ??
Cool rig Andy! Can't offer any help with your question but welcome to the boards.
__________________
Just hopin' I live long enough to finish something!!! |
|
|
|
|
02-22-2009, 02:45 PM
|
#41 |
|
Neighborhood Pickle Slinger
Join Date: Jan 2007
Location: Cadolzburg, Bavaria, Germany
Posts: 2,224
|
Re: Who makes center caps for 6 lugs ??
Welcome to the board Andy!
I can´t help you with your problem either but I hope you find alot of help here. I didn´t see you at the last Rockets Meet but I saw your truck sitting there. Maybe we will see each other this year at the rockets. Viel Spaß hier im Forum! Greets from Sporch (Cadolzburg) Here is a picture I got of your truck last year.
__________________
-------------------------------------------------- My C10 Diary Our cars: 1966 Chevrolet Chevelle 396 - TH350 1968 Chevrolet C10/CST 327 TH400/375 1969 Corvette Stingray 350 - Muncie Manual Trans 1969 Chevrolet ElCamino 350 - TH400 1970 Cutlass Supreme Convertible - 350 Rocket - TH350 1973 Camaro LT - New Engine Done - TH350 1973 Corvette Convertible 454 - TH400 Last edited by blukangoo; 02-23-2009 at 10:50 AM. Reason: added picture |
|
|
|
|
02-22-2009, 06:44 PM
|
#42 |
|
Urban Chop Shop
Join Date: Dec 2006
Location: Tigard Oregon
Posts: 264
|
Re: Who makes center caps for 6 lugs ??
I just did a thread on this not to long ago.. A lot of you chimed in.. I did the bullet cap on my 5 on 5 lug.. I looked at mooneyes, hub cap mikes and so on.. All too expensive. I got mine from Lug Nut King on Ebay and they were under $30 shipped. Check out my thread.. They do make them for 6 lugs wheels.
http://67-72chevytrucks.com/vboard/s...d.php?t=314332
__________________
2003 Chevy Trailblazer LTZ, 2.5" Susp Lift, Tinted, HID's/LED interior/ Lot of upgrades and little mods 1965 Chevy 1/2T Longbox, soon to be a slammed shop truck Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=591266 Semper Fi Marines |
|
|
|
|
02-23-2009, 11:14 AM
|
#43 | |
|
and a few others
Join Date: Jun 2007
Location: Blue Ridge Mountains of VA
Posts: 5,638
|
Re: Who makes center caps for 6 lugs ??
Quote:
 (except diggin' the civic. I hate it)Has anyone actually done this on 6 lug? I'm 99% sure you have to have the rear and front both machined to even fit a piece of paper in between the wheel and the hub.
__________________
Bill  US Army Vet -193rd InfantryBlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi |
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
