Quick question about tires. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Funeral · 03-08-2009, 07:19 PM

Ok so I got some new tires today. I got the same size that was on it.

They are 215 /70 /15 the problem is they are rubbing at the tire rod end connection.

So my question is for an original front end setup what size trire and wheel should I have. I looked in the shop manual and it says 6.00-16 to like 8.25-18 so not real sure what to do here.

thx in advance.

Funeral · 03-08-2009, 09:15 PM

I guess it couldn't hurt to add that I am talking about a 1947 Chev Pickup 1/2 ton Thriftmaster.

Funeral · 03-09-2009, 07:55 AM

I hope someone see's this soon, not sure how long I have to return these tires if need be.

sgtusmc · 03-09-2009, 10:23 AM

I did a quick google search and 215-70 R16 seams to be as close as you can get to the 6.00-16. I would think the 15" size would be close also (I guess not they rub). Would you be able to run a 1/4" spacer up front? Are you rubbing all the time or only at full lock?

heyjoe · 03-09-2009, 07:41 PM

Have you asked over at the Stovebolt forum? The place is dedicated to old Chevy trucks up to '73. Mostly geared to '30s, '40, '50s iron.
http://www.stovebolt.com/ubbthreads/

03-08-2009, 07:19 PM	#1
Funeral Registered User Join Date: Oct 2008 Location: Ocean Springs, MS Posts: 117	Quick question about tires. Ok so I got some new tires today. I got the same size that was on it. They are 215 /70 /15 the problem is they are rubbing at the tire rod end connection. So my question is for an original front end setup what size trire and wheel should I have. I looked in the shop manual and it says 6.00-16 to like 8.25-18 so not real sure what to do here. thx in advance.

03-08-2009, 09:15 PM	#2
Funeral Registered User Join Date: Oct 2008 Location: Ocean Springs, MS Posts: 117	Re: Quick question about tires. I guess it couldn't hurt to add that I am talking about a 1947 Chev Pickup 1/2 ton Thriftmaster.

03-09-2009, 07:55 AM	#3
Funeral Registered User Join Date: Oct 2008 Location: Ocean Springs, MS Posts: 117	Re: Quick question about tires. I hope someone see's this soon, not sure how long I have to return these tires if need be.

03-09-2009, 10:23 AM	#4
sgtusmc Registered User Join Date: Mar 2008 Location: Cali. Posts: 958	Re: Quick question about tires. I did a quick google search and 215-70 R16 seams to be as close as you can get to the 6.00-16. I would think the 15" size would be close also (I guess not they rub). Would you be able to run a 1/4" spacer up front? Are you rubbing all the time or only at full lock? __________________ My build, 53 GMC / S10 swap http://67-72chevytrucks.com/vboard/s...d.php?t=305723 My build, 59 Chevy / 88 fullsize swap http://67-72chevytrucks.com/vboard/s...hlight=sgtusmc U.S. Marines - Certified Counselors to the 72 Virgins Dating Club.

03-09-2009, 07:41 PM	#5
heyjoe Registered User Join Date: Apr 2003 Location: New Orleans area Posts: 198	Re: Quick question about tires. Have you asked over at the Stovebolt forum? The place is dedicated to old Chevy trucks up to '73. Mostly geared to '30s, '40, '50s iron. http://www.stovebolt.com/ubbthreads/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.