Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-26-2009, 12:43 AM | #1 |
Registered User
Join Date: Apr 2009
Location: Rotan, TX
Posts: 30
|
Experience with C4 suspension kit for '47-'53 from Flat Out Eng.?
Anyone here have experience with the C4 suspension kit for a '47-'53 from Flat Out Engineering?
I'm asking because I'm hoping someone who's installed this kit can comment on what wheel diameters, widths and backspacing I can expect to fit inside stock fenders/fenderwheels. Ideally I'd like to run an 18"x7" or 8" front and an 18"x10" rear, widening the rear fenders 2" or slightly more if necessary for the latter. |
04-26-2009, 02:53 PM | #2 |
Registered User
Join Date: Feb 2007
Location: TN
Posts: 164
|
Re: Experience with C4 suspension kit for '47-'53 from Flat Out Eng.?
Might wanna do a search on the forum - I think a couple of guys have done this on here.
|
04-26-2009, 03:16 PM | #3 |
______________
Join Date: Sep 2006
Location: Danville, CA
Posts: 1,285
|
Re: Experience with C4 suspension kit for '47-'53 from Flat Out Eng.?
I'm subscribing to this thread because I plan on doing the same thing with my '50. I know that the C4's are 1.5" more narrow than the C5.
|
04-27-2009, 07:50 AM | #4 |
Registered User
Join Date: Nov 2007
Location: Baltimore, Ohio
Posts: 65
|
Re: Experience with C4 suspension kit for '47-'53 from Flat Out Eng.?
1984-87 C4 front ends are 60" hub width.
1988-96 C4 front end is 61.75" hub width. 1984-87 C4 rear, both models are 62.5" hub width. 1988-96 C4 rear, both models are 63.5" hub width. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|