|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-29-2009, 11:15 PM
|
#1 |
|
Registered User
Join Date: Jan 2008
Location: Tejas
Posts: 691
|
Guesstimate at 1/4 times?
Hey, I was wondering if y'all could take a guess at some quarter mile times. The truck is a '72 short step with a 350. The combo i'm thinking about is a built 2004r with 2400 stall converter, 4.10 gears, Detroit Truetrac, and 28" tires that will stick. The motor will be a stock compression 882 headed 350 with a performer or similar manifold, mild cam, hooker headers, a modified quadrajet, and 2.5" duals with an x-pipe. SO maybe 240hp? With 4.10 gears, 2400 stall, and the 200's lower first gear I think it should 60' alright, but not much else. Maybe mid 14's? Thanks
__________________
'72 cheyenne super step, '05 long bed gmc |
|
|
|
04-30-2009, 07:35 AM
|
#2 |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: Guesstimate at 1/4 times?
I'd say mid to lower 14's if its right. A buddy of mine has a very similar motor for sale that is a gm crate motor with several upgrades. It has very low miles but he is building a big block. Want to make a road trip to bama?
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
|
|
|
|
04-30-2009, 11:53 AM
|
#3 |
|
Registered Truck Offender
Join Date: May 2008
Location: hells training ground (aka Ariz)
Posts: 3,118
|
Re: Guesstimate at 1/4 times?
I'd agree,, 14's if it hooks. The deep 1st of a 200 isn't going to be the greatest thing for traction with the light rear weight of a pickup,,, but with sticky's I think 14's is doable. I don't know that I'd be so optimistic to say it will go 14's out of the box. I think your gonna have to work for it a little.
__________________
Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral. |
|
|
|
|
04-30-2009, 12:18 PM
|
#4 |
|
Jason
Join Date: Sep 2008
Location: Wetumpka, AL
Posts: 152
|
Re: Guesstimate at 1/4 times?
I have a very similiar setup except with 3.73 gears and a TH-350. You should run mid to low 14's with some sticky tires.
 Best 1/4 ET @ mph: 14.34@93.59 Best 1/8 ET @ mph: 9.17@76.5 Best 60 ft: 2.09 on MT ET Street Engine: 350 Transmission: TH-350 |
|
|
|
|
04-30-2009, 04:47 PM
|
#5 | |
|
Registered User
Join Date: Jan 2008
Location: Tejas
Posts: 691
|
Re: Guesstimate at 1/4 times?
Quote:
It has advance ground in so I don't have to rev my stock bottom end too high plus it keeps a little dynamic compression. I would get the k-kit for the valve springs and all.
__________________
'72 cheyenne super step, '05 long bed gmc |
|
|
|
|
|
04-30-2009, 09:15 PM
|
#6 |
|
Jason
Join Date: Sep 2008
Location: Wetumpka, AL
Posts: 152
|
Re: Guesstimate at 1/4 times?
I am running the xe262 cam with a stock stamped 1.5 rocker. That cam grind looks pretty cool. I think it would run great.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
