![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not too old to learn
Join Date: Mar 2004
Location: SoCal
Posts: 617
|
![]() ![]() Any way what I'm running into is the crankshaft pulley availability. I'm adding A/C to a 350 crate. The change to a 2 groove water pump pulley is easy,but the crank presents the problem. Starting from balancer forward I need three grooves 1. Water pump/alternator 2.A/C 3 position must be blank 4 power steering pump So I thought I could get a 2 groove crank pulley and ad the cast power steering pulley I now have.( see photo) No luck at Summit could order but not guaranteed to fit. Napa nothing my local hotrod shop nothing. Any body got any ideas?
__________________
1968 C10 a way to long restoration. |
![]() |
![]() |
![]() |
#2 |
Member #1049
Join Date: Jun 2000
Location: Troy Montana
Posts: 3,940
|
Re: crankshaft pulley problem
This is what the crank pulley you are in need of looks like:
http://cgi.ebay.com/ebaymotors/CHEVY...Q5fAccessories |
![]() |
![]() |
![]() |
#3 | |
Not too old to learn
Join Date: Mar 2004
Location: SoCal
Posts: 617
|
Re: crankshaft pulley problem
Quote:
__________________
1968 C10 a way to long restoration. |
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|