67-72 partsssssssss! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cleszkie · 05-07-2009, 12:09 PM

PM'ed you.

chuckmc8 · 05-07-2009, 12:14 PM

I need the blue single arm rest for 67 if its still available. If so, shipped to 30135 please.

LOW DOUGH · 05-07-2009, 01:37 PM

wow, you have just a few parts.... J/K

OLD68CHEVY · 05-07-2009, 01:40 PM

do you know if they powersteering is for a small block and if it is i want it shipped to 78634

**kev2809** · 05-07-2009, 08:20 PM

would you cut up and ship a piece of metal off the bedside?
heres a pic of the piece...its about 3 feet wide, 2 feet tall

[IMG]

[/IMG]

IndyRich · 05-07-2009, 09:07 PM

Randy,
those GMC parking lights and back up lenses look good to me. So you said $25 shipped. I have a paypal account how do I pay you through it.

**zeusflash** · 05-07-2009, 09:18 PM

Hi Randy,Payment for the vacuum fittings sent via Paypal,Thanks again!

gcburdic · 05-07-2009, 10:10 PM

I'll pass Randy....Thanks for looking and the lesson on the x-members!!!LOL

faribran · 05-08-2009, 02:24 PM

Randy,
Page 12, Last Picture, is that a Emergency Brake guard?.. if so how much to 36345?
thanks
Rich

teeitup · 05-08-2009, 05:14 PM

faribran, Rich, sorry Classic Bowties already bought it
Thanks Randy

david wiebelt · 05-08-2009, 07:25 PM

Did you have a fuel switch on the dash for the duel tanks? I asked before and you said you may have one on another truck you were getting in.
Thanks Dave

wsiembor · 05-10-2009, 12:57 PM

>>>>wsiembor, Will, they are not complete, they are cut off. I'd take $20 shipped for all 67 stuff. I can get a pic later today if interested?

Hi Randy,

I'll take everything for $20. Also can you let me know how much extrat the blue seat belt boots are that are shown at the bottom of your original #12 post.

Obviously I'l need to know how much I owe for shipping too.

Thanks,

Will

teeitup · 05-10-2009, 01:10 PM

Will, for the 67 stuff and the blue covers for $35 shipped. I'll pm you. Thanks Randy

oldschooler · 05-08-2009, 08:29 PM

Hey Randy, your paypal account should be a little fatter now. If you have a set of the rubber do hickies that go on the end of the metal rod of the visor, could you throw them in the box also? I will send extra money if needed. Let me know. Thanks, Rich

gcburdic · 05-08-2009, 09:45 PM

Thanks again for the pics Randy....yep...those are definitely different.....Hopefully a LH truck guy will need these!!!....

Lugnut64052 · 05-08-2009, 10:34 PM

Doh!
I see you still have that bedside filler neck stuff (pictures in post #34) from the Blazer.

How much for it, the cover, and the vent to 64052?

teeitup · 05-08-2009, 11:10 PM

Geoff, no problem, yes your right have to be a longhorn guy that would want them
Lugnut, Bret, I thiought it was sold but the other member couldn't get the money rounded up so its for sale again, $40 plus shipping for it all. Cover has a couple rust spots in bottom and the inside of the filler neck has been cut to make it bigger for some reason
Thanks Randy

Lugnut64052 · 05-10-2009, 12:53 AM

Quote:

Originally Posted by teeitup

$40 plus shipping for it all. Cover has a couple rust spots in bottom and the inside of the filler neck has been cut to make it bigger for some reason
Thanks Randy

Okay, that'll work.
P.M. on the way.

teeitup · 05-10-2009, 09:37 AM

billdo, thanks let me know
Lugnut, Bret, I have a factory oil pressure line. I'll get a quote asap
Ridgeback, yes they are 3/4 but are rough. I'll get some pics. I put some pics of them on my big block longhorn thread
Thanks Randy

glimmertwin01 · 05-10-2009, 10:28 AM

Randy got bolts
I almost broke an ankle when i tripped over it the mailman left them in my porch by the door..and the box didnt break...LOL
thanks

teeitup · 05-10-2009, 11:05 AM

The mail lady said she thought we were getting a bargain since that box was so heavy. I'm glad it made it there OK.
I'm still looking for a drivers bedside corner for you. I've got 2 more trucks bought but I don't know when I'll get them or condition of them yet.
Thanks Randy

glimmertwin01 · 05-10-2009, 11:13 AM

OK wish i knew you had an ebrake cover for my rig...
snooze i lose... i got a corner off a bed last sat not sure how it will look after sand blasting the rust....
keep lookn
how about a 67 gas petal? the one with the 2 holes for the bottom?
have a good 67 lighter button??
or a 67 headlight knob assembly? remarkably my OE raio still has the knobs..

glimmertwin01 · 05-10-2009, 01:41 PM

randy the cig lighter with the silver center is good put it aside for my next "order" I have a black headlight knob..need one with the silver center... if you come across one keep me in mind... but ill take the lighter... as I said put it aside for me..thanks

teeitup · 05-11-2009, 05:19 PM

Dan, I'll set back the cig lighter for you. I'll watch for you the other stuff too. Thanks Randy

**zeusflash** · 05-11-2009, 09:04 PM

Hi Randy, I got the vacuum fittings today. They look great! Thank you once again.

05-07-2009, 12:14 PM	#2
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 67-72 partsssssssss! I need the blue single arm rest for 67 if its still available. If so, shipped to 30135 please.

05-07-2009, 01:40 PM	#4
OLD68CHEVY Registered User Join Date: Jun 2007 Location: HUTTO Posts: 25	Re: 67-72 partsssssssss! do you know if they powersteering is for a small block and if it is i want it shipped to 78634 __________________ 68 CHEVY SB 307 PROJECT 2006 CHEVY ON 20 IN WHEELS

05-07-2009, 08:20 PM	#5
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,190	Re: 67-72 partsssssssss! would you cut up and ship a piece of metal off the bedside? heres a pic of the piece...its about 3 feet wide, 2 feet tall [IMG][/IMG]

05-07-2009, 09:07 PM	#6
IndyRich Registered User Join Date: Feb 2009 Location: Indianapolis, IN Posts: 372	Re: 67-72 partsssssssss! Randy, those GMC parking lights and back up lenses look good to me. So you said $25 shipped. I have a paypal account how do I pay you through it.

05-07-2009, 09:18 PM	#7
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Re: 67-72 partsssssssss! Hi Randy,Payment for the vacuum fittings sent via Paypal,Thanks again! __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

05-07-2009, 12:09 PM	#1
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: 67-72 partsssssssss! PM'ed you.

05-07-2009, 01:37 PM	#3
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: 67-72 partsssssssss! wow, you have just a few parts.... J/K

05-07-2009, 10:10 PM	#8
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,299	Re: 67-72 partsssssssss! I'll pass Randy....Thanks for looking and the lesson on the x-members!!!LOL __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

05-08-2009, 02:24 PM	#9
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: 67-72 partsssssssss! Randy, Page 12, Last Picture, is that a Emergency Brake guard?.. if so how much to 36345? thanks Rich __________________ "

05-08-2009, 05:14 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 67-72 partsssssssss! faribran, Rich, sorry Classic Bowties already bought it Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-08-2009, 07:25 PM	#11
david wiebelt Registered User Join Date: Jan 2009 Location: florida Posts: 172	Re: 67-72 partsssssssss! Did you have a fuel switch on the dash for the duel tanks? I asked before and you said you may have one on another truck you were getting in. Thanks Dave

05-10-2009, 12:57 PM	#12
wsiembor Registered User Join Date: Mar 2007 Location: Great Lakes Region Posts: 2	Re: 67-72 partsssssssss! >>>>wsiembor, Will, they are not complete, they are cut off. I'd take $20 shipped for all 67 stuff. I can get a pic later today if interested? Hi Randy, I'll take everything for $20. Also can you let me know how much extrat the blue seat belt boots are that are shown at the bottom of your original #12 post. Obviously I'l need to know how much I owe for shipping too. Thanks, Will

05-10-2009, 01:10 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 67-72 partsssssssss! Will, for the 67 stuff and the blue covers for $35 shipped. I'll pm you. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-08-2009, 08:29 PM	#14
oldschooler Registered User Join Date: Mar 2007 Location: spring grove, Pa. Posts: 538	Re: 67-72 partsssssssss! Hey Randy, your paypal account should be a little fatter now. If you have a set of the rubber do hickies that go on the end of the metal rod of the visor, could you throw them in the box also? I will send extra money if needed. Let me know. Thanks, Rich

05-08-2009, 09:45 PM	#15
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,299	Re: 67-72 partsssssssss! Thanks again for the pics Randy....yep...those are definitely different.....Hopefully a LH truck guy will need these!!!.... __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present



Register or Log In To remove these advertisements.

05-08-2009, 10:34 PM	#16
Lugnut64052 Middle-aged Curmudgeon Join Date: Jun 2008 Location: Independence, MO Posts: 753	Re: 67-72 partsssssssss! Doh! I see you still have that bedside filler neck stuff (pictures in post #34) from the Blazer. How much for it, the cover, and the vent to 64052? __________________ Bret Check out the site's Truck Tech FAQ. Be a site supporter. My more-or-less pathetic build thread. Board members I've met: ------------------------------ Longhorn Man Dieselwrencher jholley big mike71

05-08-2009, 11:10 PM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 67-72 partsssssssss! Geoff, no problem, yes your right have to be a longhorn guy that would want them Lugnut, Bret, I thiought it was sold but the other member couldn't get the money rounded up so its for sale again, $40 plus shipping for it all. Cover has a couple rust spots in bottom and the inside of the filler neck has been cut to make it bigger for some reason Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-10-2009, 09:37 AM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 67-72 partsssssssss! billdo, thanks let me know Lugnut, Bret, I have a factory oil pressure line. I'll get a quote asap Ridgeback, yes they are 3/4 but are rough. I'll get some pics. I put some pics of them on my big block longhorn thread Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-10-2009, 10:28 AM	#20
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 67-72 partsssssssss! Randy got bolts I almost broke an ankle when i tripped over it the mailman left them in my porch by the door..and the box didnt break...LOL thanks __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

05-10-2009, 11:05 AM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 67-72 partsssssssss! The mail lady said she thought we were getting a bargain since that box was so heavy. I'm glad it made it there OK. I'm still looking for a drivers bedside corner for you. I've got 2 more trucks bought but I don't know when I'll get them or condition of them yet. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-10-2009, 11:13 AM	#22
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 67-72 partsssssssss! OK wish i knew you had an ebrake cover for my rig... snooze i lose... i got a corner off a bed last sat not sure how it will look after sand blasting the rust.... keep lookn how about a 67 gas petal? the one with the 2 holes for the bottom? have a good 67 lighter button?? or a 67 headlight knob assembly? remarkably my OE raio still has the knobs.. __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

05-10-2009, 01:41 PM	#23
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 67-72 partsssssssss! randy the cig lighter with the silver center is good put it aside for my next "order" I have a black headlight knob..need one with the silver center... if you come across one keep me in mind... but ill take the lighter... as I said put it aside for me..thanks __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style Last edited by glimmertwin01; 05-10-2009 at 01:42 PM. Reason: mis spelling

05-11-2009, 05:19 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 67-72 partsssssssss! Dan, I'll set back the cig lighter for you. I'll watch for you the other stuff too. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-11-2009, 09:04 PM	#25
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Re: 67-72 partsssssssss! Hi Randy, I got the vacuum fittings today. They look great! Thank you once again. __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.