Quick question!!!

[oklahomaduner]

Hey i have a 66 stepside but its 400 miles away from me. does anyone know the depth of the bed from the top of the wood to the top of the bed rail and the height of the cab from the bottom of the door the the top of the roof?

any help would be great, thanks guys.

[steverino66]

Welcome, other Okie-
I just went out with the tape measure: bottom of door to highest roof point is 55", I tried not to measure the curve of the door. The rocker adds another 3" below door edge if you care. The bed depth is 16-1/2"

[oklahomaduner]

Thank you so much! and one more when ever you get a chance.. lowest point of the cab floor to the top of the cab.

thanks again

[oklahomaduner]

oh, and the hood to the top of the roof

[oklahomaduner]

Where are you out of?

[steverino66]

duner-
I'm in Crescent, 30mi north of OKC.
Here are those other measurements: cab floor to inside roof, measured in the footwell at front of seat - 49", give or take 1/4"; hood to highest forward part of cab, behind the curve at cab front is 20" - laid a flat board on the roof for that one (there's that raised ridge toward the back of top that's about another 1/2" high). I won't ask what we're doing here - figure there's a plan.

[oklahomaduner]

Im trying to figure of some deminsions for the truck. Thanks a lot for your help!!