05-21-2009, 07:28 PM | #1 |
Registered User
Join Date: Apr 2009
Location: Centreville, Virginia
Posts: 846
|
Seized Up Screw
I was wondering if any of you guys out there can help me. The fuel filler door on my 82' is rusted out. I am trying to remove the (2) screws that hold it to the bedside but, one will not budge. It seems to be rusted in place. Any ideas on a product that will free it up? I have tried the budget multi-purpose lubricant from Advance Auto Parts to no avail. I would like to find something that will free it up before I have to cut it out.........
|
05-21-2009, 07:37 PM | #2 |
Registered User
Join Date: Sep 2002
Location: long island, new york
Posts: 1,333
|
Re: Seized Up Screw
heat it up a bit and spray som pb blaster on it should come off..
__________________
1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door |
05-21-2009, 09:00 PM | #3 |
Crazy
Join Date: Apr 2005
Location: Emmaus, Pa
Posts: 203
|
Re: Seized Up Screw
Mix some ATF with acetone. Works 100 times better then PB blaster or Liquid wrench. I found an article somewhere where torque testing was done, but I can't find it at the moment.
__________________
77 SB Stepside in a bunch of pieces scattered around the garage. |
05-21-2009, 09:21 PM | #4 |
Blaze-Air
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
|
Re: Seized Up Screw
Screwdriver on screw. Smack screw driver with hammer. Works every time.
|
05-22-2009, 07:03 AM | #5 |
Registered User
Join Date: Apr 2009
Location: Centreville, Virginia
Posts: 846
|
Re: Seized Up Screw
Thanks guys. I will give all (3) recommendations a try. tgh117, my brother in law lives in Emmaus............small world
|
05-22-2009, 07:32 AM | #6 |
dang its hot
Join Date: Nov 2006
Location: frankfort kentucky
Posts: 1,349
|
Re: Seized Up Screw
I always keep a jar of valve grind compund to dip the screwdriver in, keeps from rounding off screw heads. dip, place, smack, out comes the screw!
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|