Windshield frame on ebay - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hgs_notes · 07-03-2009, 10:45 AM

http://cgi.ebay.com/ebaymotors/ws/eB...m=150356651998

bouncytruck · 07-03-2009, 11:12 AM

Is that rust I see?

**Thealien** · 07-03-2009, 12:45 PM

Not only is it rusty he didn't leave much of the frame to weld it in either.

hgs_notes · 07-03-2009, 01:17 PM

Yes there is some rust, but the inside panel is OK. There is plenty of side frame there, it's cut down about 3-4 inches on the outside, with about an inch or so on the inner part of the windshield gasket. You really shouldn't need more than that.

I know it's not great, but it is better than what a lot of people are looking at on their trucks right now. Me included. I just found a better one, so I can get rid of this one. If it's too nasty for you, I guess you won't be bidding.

bouncytruck · 07-03-2009, 03:24 PM

Sorry, Didn't realize it was yours. Given your MN location, this one is probably in good shape. We get a little spoiled on the west coast.

07-03-2009, 10:45 AM	#1
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Windshield frame on ebay http://cgi.ebay.com/ebaymotors/ws/eB...m=150356651998 __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

07-03-2009, 11:12 AM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Windshield frame on ebay Is that rust I see? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L Last edited by bouncytruck; 07-03-2009 at 12:08 PM.

07-03-2009, 12:45 PM	#3
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,138	Re: Windshield frame on ebay Not only is it rusty he didn't leave much of the frame to weld it in either.

07-03-2009, 01:17 PM	#4
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Windshield frame on ebay Yes there is some rust, but the inside panel is OK. There is plenty of side frame there, it's cut down about 3-4 inches on the outside, with about an inch or so on the inner part of the windshield gasket. You really shouldn't need more than that. I know it's not great, but it is better than what a lot of people are looking at on their trucks right now. Me included. I just found a better one, so I can get rid of this one. If it's too nasty for you, I guess you won't be bidding. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 07-03-2009 at 01:20 PM.

07-03-2009, 03:24 PM	#5
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Windshield frame on ebay Sorry, Didn't realize it was yours. Given your MN location, this one is probably in good shape. We get a little spoiled on the west coast. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.