Source for 305 V6 5.0L Motor Mounts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dccarpenter · 07-13-2009, 01:16 PM

I can't seem to find motor mounts for my 305CI V6 5.0L engine in my '67 GMC 1/2 ton long bed pickup anywhere, I've searched online and been to the auto parts stores and no one has them. I've tried modifying an old Ford motor mount but it didn't quite work..now because the rubber is separated from the metal whenever I take a left turn my driveshaft hits my frame tunnel making a screeching noise..quite disturbing.

I don't want to resort to rednecking together a piece of 2x4 to solve this problem. If anyone knows of a vendor where I can find this motor mount it would be really appreciated.

Erl · 07-15-2009, 01:23 PM

You can not buy them new. I believe the company is Steele Rubber, they will recondition yours. A good source for this info is Jolly's 60-66 GMC web site.

ERL

**Bob B.** · 07-15-2009, 07:39 PM

Unfortunately, those mounts are no longer made. But, you still have 2 options. You can send them to Steele as pointed out in the above post, or ask on Jolly's site. I think someone there found a transmission mount that works.

07-13-2009, 01:16 PM	#1
dccarpenter Registered User Join Date: Jun 2009 Location: Washington, dC Posts: 176	Source for 305 V6 5.0L Motor Mounts? I can't seem to find motor mounts for my 305CI V6 5.0L engine in my '67 GMC 1/2 ton long bed pickup anywhere, I've searched online and been to the auto parts stores and no one has them. I've tried modifying an old Ford motor mount but it didn't quite work..now because the rubber is separated from the metal whenever I take a left turn my driveshaft hits my frame tunnel making a screeching noise..quite disturbing. I don't want to resort to rednecking together a piece of 2x4 to solve this problem. If anyone knows of a vendor where I can find this motor mount it would be really appreciated. Last edited by N2TRUX; 07-13-2009 at 01:21 PM.

07-15-2009, 01:23 PM	#2
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	Re: Source for 305 V6 5.0L Motor Mounts? You can not buy them new. I believe the company is Steele Rubber, they will recondition yours. A good source for this info is Jolly's 60-66 GMC web site. ERL __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

07-15-2009, 07:39 PM	#3
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,393	Re: Source for 305 V6 5.0L Motor Mounts? Unfortunately, those mounts are no longer made. But, you still have 2 options. You can send them to Steele as pointed out in the above post, or ask on Jolly's site. I think someone there found a transmission mount that works. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.