49 Chevy Mustang II and 4-link project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DM310 · 01-24-2008, 05:10 AM

I am building my buddies truck. He just got it out of the body shop and wanted me to do some suspension work on it. Started off with a TCI mustang II front clip, new column, then did the rear 4-link w/ airbags. Currently installing a t5 trans behind the 235 motor. Still need to make the custom bed cover and wire it all up. Hope you like it so far.

What I started with

Started the mustang II install

4-link

jkaylor68gmc · 01-24-2008, 05:21 AM

Looks really good!

Kid · 01-24-2008, 10:45 AM

nice work, chassis mod or fab is my favorite part of a build.

bad4587 · 01-27-2008, 12:43 PM

Thats a sweet ride!!! Is that a 3 1/2 inch chop top?

NEALS49 · 01-27-2008, 01:10 PM

Lookn Great! Are you going to bag the front? Do the rear tires hit the top of the fenders? I built a rear sit up close to yours on my CE and no matter the c notch or bridge I am restriced to tire clerance, due to my tires hitting the top of the finder/body. So the only way I can truly sit the running boards on the ground is to go to a small rear tire, and that sucks. Good Luck looks Like you are on your way to getting your friend a fine ride.

FRENCHBLUE72 · 01-29-2008, 12:27 AM

Looks good...

53lochevy · 02-01-2008, 01:08 AM

Hey bud where did u purchace the 8 inch rear notch kit from?

djracer · 02-14-2008, 03:46 PM

what did you spend on the front mustang II Stuff? Where did it come from how was the fit?

lumpy81 · 02-14-2008, 04:04 PM

sweeeeeet!!!!

DM310 · 02-16-2008, 01:28 AM

Quote:

Originally Posted by djracer

what did you spend on the front mustang II Stuff? Where did it come from how was the fit?

Came from TCI and the fit was great

djracer · 02-16-2008, 06:55 AM

I have seen kits from 1300 to 3000 how bad is theirs? My little brother wants to do one.

ratrodmiller · 07-26-2009, 10:24 PM

your truck looks great! Im building one also almost done trying figure out how to get the glass done .mine has a 4 inch chop . what is yours? and whos gonna do your glass?

01-24-2008, 05:10 AM	#1
DM310 Registered User Join Date: Jan 2005 Location: Los Angeles Posts: 256	49 Chevy Mustang II and 4-link project I am building my buddies truck. He just got it out of the body shop and wanted me to do some suspension work on it. Started off with a TCI mustang II front clip, new column, then did the rear 4-link w/ airbags. Currently installing a t5 trans behind the 235 motor. Still need to make the custom bed cover and wire it all up. Hope you like it so far. What I started with Started the mustang II install 4-link __________________ 66 C10 (under construction) 1.5" crossmember drop 2" Z'ed frame 8" rear notch Watts-link Bagged DJM 3" spindles

01-24-2008, 05:21 AM	#2
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: 49 Chevy Mustang II and 4-link project Looks really good! __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

01-24-2008, 10:45 AM	#3
Kid Senior Member Join Date: Jun 2002 Location: Kansas Posts: 702	Re: 49 Chevy Mustang II and 4-link project nice work, chassis mod or fab is my favorite part of a build. __________________ The kid Build threads: 51 Jimmy http://67-72chevytrucks.com/vboard/s...d.php?t=154951 http://67-72chevytrucks.com/vboard/s...d.php?t=219902 http://www.classictrucks.com/feature...uck/index.html 68 C10 http://67-72chevytrucks.com/vboard/s...ad.php?t=50348

01-27-2008, 12:43 PM	#4
bad4587 Registered User Join Date: Jul 2007 Location: Rio Rancho, N.M. Posts: 22	Re: 49 Chevy Mustang II and 4-link project Thats a sweet ride!!! Is that a 3 1/2 inch chop top?

01-27-2008, 01:10 PM	#5
NEALS49 Registered User Join Date: Jan 2005 Location: Flat lands of Kansas Posts: 59	Re: 49 Chevy Mustang II and 4-link project Lookn Great! Are you going to bag the front? Do the rear tires hit the top of the fenders? I built a rear sit up close to yours on my CE and no matter the c notch or bridge I am restriced to tire clerance, due to my tires hitting the top of the finder/body. So the only way I can truly sit the running boards on the ground is to go to a small rear tire, and that sucks. Good Luck looks Like you are on your way to getting your friend a fine ride. __________________ NEALS49 N2BNLOW 2LOW4U 6INAROW 1949 GMC 100 5 WINDOW-GMC 100 CANOPY EXPRESS-GMC 250 5 WINDOW 9' BED "RECYCLE BUILD A HotRod" "Support Your Local Automobile Clubs" See My Pics: https://www.flickr.com/photos/neals49/collections/ See you on: http://www.facebook.com/neals49mygarage Group Photo Pool 47-55 1st AD trucks: http://www.flickr.com/groups/advanceddesign

01-29-2008, 12:27 AM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: 49 Chevy Mustang II and 4-link project Looks good... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-01-2008, 01:08 AM	#7
53lochevy Registered User Join Date: Sep 2007 Location: mckinney, tx Posts: 141	Re: 49 Chevy Mustang II and 4-link project Hey bud where did u purchace the 8 inch rear notch kit from?

02-14-2008, 03:46 PM	#8
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: 49 Chevy Mustang II and 4-link project what did you spend on the front mustang II Stuff? Where did it come from how was the fit? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-14-2008, 04:04 PM	#9
lumpy81 Registered User Join Date: Feb 2008 Location: Leavenworth Ks. Posts: 43	Re: 49 Chevy Mustang II and 4-link project sweeeeeet!!!! __________________ death metal and hotrods 68 GMC SHORT STEP 35 CHEVY PICKUP A FEW BIKES SINNERS C.C.

02-16-2008, 06:55 AM	#11
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: 49 Chevy Mustang II and 4-link project I have seen kits from 1300 to 3000 how bad is theirs? My little brother wants to do one. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-26-2009, 10:24 PM	#12
ratrodmiller Registered User Join Date: Feb 2009 Location: plain dealing,la Posts: 190	Re: 49 Chevy Mustang II and 4-link project your truck looks great! Im building one also almost done trying figure out how to get the glass done .mine has a 4 inch chop . what is yours? and whos gonna do your glass?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.