55.2-59 55-57 one piece windows - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Az. Hank · 06-05-2016, 09:16 AM

Nice half the price^^^

Thanks Hank

Az. Hank · 06-05-2016, 02:41 PM

I went to order the PDF file on line at Kinko's and all I could seem to order was in a poster format and they wanted $43.00 so I went in and told them what I wanted and it only cost $3.30. Just wanted to let everyone know.

Thanks for this thread everyone.

Az. Hank · 06-05-2016, 02:44 PM

I also decided to go with power windows. It looks like you don't need that metal "C" channel as it comes with the kit.

http://www.black-ridge.com/el2000-su...-glass-kit.htm

Kim57 · 06-06-2016, 08:14 AM

Quote:

Originally Posted by Az. Hank

I also decided to go with power windows. It looks like you don't need that metal "C" channel as it comes with the kit.

http://www.black-ridge.com/el2000-su...-glass-kit.htm

Would like to know how this kit works out.
Kim

QBRacing · 08-21-2017, 01:56 AM

Sorry to rehash an old thread again but what better place than in this thread.

I am about to start this mod on my truck in NZ. Obviously its a bit harder down here with the lack of suppliers but I have a good exporter in LA which helps heaps.

I was looking at the extension needed to extend 3" for the channel run. I know its been linked above a number of times but is it the same part as #7 on this page from LMC.

I was going to be getting a few small parts (roof skin and visor) from them shortly and thought I might just add it at the same time......

Finally - the 3 links from restorationspecialies - Do I just need 1 of each piece to complete or multiples.

Q

**idbeast** · 08-21-2017, 08:17 AM

Quote:

Originally Posted by QBRacing

Sorry to rehash an old thread again but what better place than in this thread.

Finally - the 3 links from restorationspecialies - Do I just need 1 of each piece to complete or multiples.

Q

I used restorationspecialies for the C Channel. You will need 2 one for each side.
On the other links you only need 1ea the last number of the part number is 96 meaning it is 96 inches long.

QBRacing · 08-22-2017, 01:06 AM

Quote:

Originally Posted by idbeast

I used restorationspecialies for the C Channel. You will need 2 one for each side.
On the other links you only need 1ea the last number of the part number is 96 meaning it is 96 inches long.

Why did you use the http://stores.restorationspecialties.com/10-m-96/ rather than the http://stores.restorationspecialties.com/y630p-96/ as per the original parts lists.

Looking at the dimensions its a totally different size ???

**idbeast** · 08-22-2017, 08:27 AM

Go to this page and start reading at post #7, it has pictures and explanations...
http://67-72chevytrucks.com/vboard/s...st#post7987617

LDO · 10-01-2017, 05:11 PM

Quote:

Originally Posted by idbeast

Go to this page and start reading at post #7, it has pictures and explanations...
http://67-72chevytrucks.com/vboard/s...st#post7987617

idbeast,
sent you a pm.

clegg · 10-22-2017, 07:46 PM

I have a 1955 TF truck converted to one piece side glass. I used the Specialty Power Windows kit and the window run trim from Restoration Specialties part #10M-96-WIN. It requires 2 each. One for each side, these fit perfectly. They come in a long straight piece. You can pre shape them with the glass before it's installed.

The Specialty Power Windows kit comes with a template for the glass shape. The motors in the kit are fast and quiet running like my new Silverado. I have to still order the window felts that attach to the door openings horizontally.

Additionally, the Specialty Power Windows kit comes with the forward channels that fit down in the doors, switches and decent instructions to complete a one piece window project and was what I needed as my truck had no existing windows or regulators (you will have to source the glass).

BBPanel · 04-23-2018, 04:45 PM

Anyone used Auto City Classic for their one-piece door glass - how did it fit? I'm wanting tinted glass for all pieces and feel like I need to get them from same vendor to get consistent shading. Went through the thread pretty quick and did not see any reference to them. Thanks. -Bob

BigDaddyV · 05-15-2018, 10:55 AM

Sub'd for reference, I'm doing the install right now. using your tech, its working quite well! thanks!!

Scottish58chev · 06-10-2018, 04:36 AM

Hi guys, just tried the link for the PDF template and it's saying not found?? anyone else have this issue?

OKGMC4 · 06-11-2018, 07:14 AM

Quote:

Originally Posted by Scottish58chev

Hi guys, just tried the link for the PDF template and it's saying not found?? anyone else have this issue?

Found elsewhere on the net that the company is closed down so the website isn’t up now. Hopefully someone else can provide that file in the future. I still have my template in Masonite.

Scottish58chev · 06-12-2018, 02:53 AM

Looking into it and I think the template is the least of my worries. There just don’t seem to be any suppliers for the felts or channels and shipping seems very expensive from the states. Looks like I’ll be sticking to the quarter window for now

Posted via Mobile Device

lowdownstar · 06-27-2018, 06:50 PM

anyone still have the template i can use???

Thanks Ray

**idbeast** · 06-27-2018, 07:54 PM

Quote:

Originally Posted by lowdownstar

anyone still have the template i can use???

Thanks Ray

Contact blackdiesel or GRIMSS, blackdiesel is the one who made the template, and I know blackdiesel was going to send GRIMSS the PDF. I have it somewhere but I have 12TB of hard drives so just searching for a unnamed PDF takes forever!!!

lowdownstar · 06-27-2018, 08:16 PM

Quote:

Originally Posted by idbeast

Contact blackdiesel or GRIMSS, blackdiesel is the one who made the template, and I know blackdiesel was going to send GRIMSS the PDF. I have it somewhere but I have 12TB of hard drives so just searching for a unnamed PDF takes forever!!!

I sent both of them i message but haven't heard back as of yet, i know everyone is busy this time of year with vacations and summer things to do.

thanks for getting back to me

Ray

dsraven · 06-28-2018, 01:36 AM

is this what you are looking for?

https://www.youtube.com/watch?v=k2_p9Ol9isE

dsraven · 06-28-2018, 01:36 AM

part 2

https://www.youtube.com/watch?v=8iI5wEinY9E

dsraven · 06-28-2018, 01:39 AM

part 3

https://www.youtube.com/watch?v=rJSBA7-o_n8

dsraven · 06-28-2018, 01:40 AM

part 4

https://www.youtube.com/watch?v=eAoy92wK1JY

part 5

https://www.youtube.com/watch?v=zSDPBnEbtA8

lowdownstar · 06-28-2018, 06:28 AM

i have those and that is great stuff i was looking for the template to build the window itself.

thanks Ray

dsraven · 06-28-2018, 09:48 AM

have you seen this thread?

http://67-72chevytrucks.com/vboard/s...=366078&page=6

Aussie chev pickup · 07-12-2018, 07:46 AM

Posted via Mobile Device

06-05-2016, 02:41 PM	#2
Az. Hank Registered User Join Date: Feb 2009 Location: Fort Mohave, Arizona Posts: 207	Re: 55-57 one piece windows I went to order the PDF file on line at Kinko's and all I could seem to order was in a poster format and they wanted $43.00 so I went in and told them what I wanted and it only cost $3.30. Just wanted to let everyone know. Thanks for this thread everyone. __________________ My 55 Build 55 C-4

06-05-2016, 02:44 PM	#3
Az. Hank Registered User Join Date: Feb 2009 Location: Fort Mohave, Arizona Posts: 207	Re: 55-57 one piece windows I also decided to go with power windows. It looks like you don't need that metal "C" channel as it comes with the kit. http://www.black-ridge.com/el2000-su...-glass-kit.htm __________________ My 55 Build 55 C-4

08-21-2017, 01:56 AM	#5
QBRacing Registered User Join Date: Apr 2016 Location: Auckland, NZ Posts: 300	Re: 55-57 one piece windows Sorry to rehash an old thread again but what better place than in this thread. I am about to start this mod on my truck in NZ. Obviously its a bit harder down here with the lack of suppliers but I have a good exporter in LA which helps heaps. I was looking at the extension needed to extend 3" for the channel run. I know its been linked above a number of times but is it the same part as #7 on this page from LMC. I was going to be getting a few small parts (roof skin and visor) from them shortly and thought I might just add it at the same time...... Finally - the 3 links from restorationspecialies - Do I just need 1 of each piece to complete or multiples. Q __________________ My 1958 SWB Fleetside Build My 1971 Nova Build Site Last edited by QBRacing; 08-21-2017 at 02:05 AM.

08-22-2017, 08:27 AM	#8
idbeast Senior Member Join Date: Oct 2016 Location: Olympia, WA Posts: 523	Re: 55-57 one piece windows Go to this page and start reading at post #7, it has pictures and explanations... http://67-72chevytrucks.com/vboard/s...st#post7987617

04-23-2018, 04:45 PM	#11
BBPanel Registered User Join Date: Apr 2012 Location: DFW Posts: 124	Re: 55-57 one piece windows Anyone used Auto City Classic for their one-piece door glass - how did it fit? I'm wanting tinted glass for all pieces and feel like I need to get them from same vendor to get consistent shading. Went through the thread pretty quick and did not see any reference to them. Thanks. -Bob

06-05-2016, 09:16 AM	#1
Az. Hank Registered User Join Date: Feb 2009 Location: Fort Mohave, Arizona Posts: 207	Re: 55-57 one piece windows Nice half the price^^^ Thanks Hank __________________ My 55 Build 55 C-4

10-22-2017, 07:46 PM	#10
clegg Registered User Join Date: Oct 2016 Location: Orlando, Fl Posts: 84	Re: 55-57 one piece windows I have a 1955 TF truck converted to one piece side glass. I used the Specialty Power Windows kit and the window run trim from Restoration Specialties part #10M-96-WIN. It requires 2 each. One for each side, these fit perfectly. They come in a long straight piece. You can pre shape them with the glass before it's installed. The Specialty Power Windows kit comes with a template for the glass shape. The motors in the kit are fast and quiet running like my new Silverado. I have to still order the window felts that attach to the door openings horizontally. Additionally, the Specialty Power Windows kit comes with the forward channels that fit down in the doors, switches and decent instructions to complete a one piece window project and was what I needed as my truck had no existing windows or regulators (you will have to source the glass). Last edited by clegg; 10-22-2017 at 07:55 PM.

05-15-2018, 10:55 AM	#12
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: 55-57 one piece windows Sub'd for reference, I'm doing the install right now. using your tech, its working quite well! thanks!! __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

06-10-2018, 04:36 AM	#13
Scottish58chev Registered User Join Date: Jul 2015 Location: Doune, perthshire, Scotland Posts: 206	Re: 55-57 one piece windows Hi guys, just tried the link for the PDF template and it's saying not found?? anyone else have this issue? __________________ My taking way longer than expected 58 build

06-12-2018, 02:53 AM	#15
Scottish58chev Registered User Join Date: Jul 2015 Location: Doune, perthshire, Scotland Posts: 206	Re: 55-57 one piece windows Looking into it and I think the template is the least of my worries. There just don’t seem to be any suppliers for the felts or channels and shipping seems very expensive from the states. Looks like I’ll be sticking to the quarter window for now Posted via Mobile Device

06-27-2018, 06:50 PM	#16
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 824	Re: 55-57 one piece windows anyone still have the template i can use??? Thanks Ray

06-28-2018, 01:36 AM	#19
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,498	Re: 55-57 one piece windows is this what you are looking for? https://www.youtube.com/watch?v=k2_p9Ol9isE

06-28-2018, 01:36 AM	#20
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,498	Re: 55-57 one piece windows part 2 https://www.youtube.com/watch?v=8iI5wEinY9E

06-28-2018, 01:39 AM	#21
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,498	Re: 55-57 one piece windows part 3 https://www.youtube.com/watch?v=rJSBA7-o_n8

06-28-2018, 01:40 AM	#22
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,498	Re: 55-57 one piece windows part 4 https://www.youtube.com/watch?v=eAoy92wK1JY part 5 https://www.youtube.com/watch?v=zSDPBnEbtA8



Register or Log In To remove these advertisements.

06-28-2018, 06:28 AM	#23
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 824	Re: 55-57 one piece windows i have those and that is great stuff i was looking for the template to build the window itself. thanks Ray

06-28-2018, 09:48 AM	#24
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,498	Re: 55-57 one piece windows have you seen this thread? http://67-72chevytrucks.com/vboard/s...=366078&page=6

07-12-2018, 07:46 AM	#25
Aussie chev pickup Registered User Join Date: Jul 2018 Location: Cessnock nsw Posts: 2	Re: 55-57 one piece windows Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.