TX WTB: 78-80 Aluminum Dash Insert - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BruthaMan · 09-28-2009, 07:57 PM

Hey guys, been away for a while taking care of business.

Kent and I are back working on the 78 project and making some great progress!

I'm looking for a 78-80 aluminum dash insert piece. This is the aluminum piece that has the two areas cut out for the AC vents and the "Silverado" logo rests on it.

I've been searching Ebay for the past six months for an NOS one. Have only seen two. One I was out of town when it ended and couldn't snag it and the other, recently, with an NOS dash bezel (that was the only one I've ever seen on Ebay...very rare!).

So, who has some nice trim?

Looking for a really nice piece. If you have a lead or one to sell, let me know. I have an aftermarket in place now and we'll probably mount the new dash later this week. Just really, really want to find a nice original piece. This is probably the most seen piece in the truck.

Hook me up!

JohnC · 09-30-2009, 11:04 AM

Have you checked LMC or Cheyenne Pick Up Parts? They are not the NOS, but I've seen a few of their inserts, and they look pretty good.

BruthaMan · 09-30-2009, 06:35 PM

Hey John. Yes, I have one of the aftermarkets now. The "real ones" are tough to find!

slugish · 10-02-2009, 09:41 PM

81 & up don't fit ??

Prong · 10-03-2009, 06:04 AM

Nope, the 81-up has a curve at the passenger side end.

USSkoval · 10-07-2009, 10:35 PM

IIRC, I have a very nice trim piece, but it's ONLY the insert. The plastic portion was broken so I pulled the insert off of it.

BruthaMan · 10-07-2009, 10:46 PM

I called out a fabricator today to see about having a custom billet harness box cover (for the painless wiring) fabricated. I had the plastic aftermarket version and showed it to him to see if he could replicate it in billet.

Supposed to give me a call tomorrow with a quote. The aftermarket billet ones wouldn't be so bad if they didn't cover up the ac outlets on the dash.

CreditGod · 10-07-2009, 11:26 PM

What options do you want on it i know where two are three are that look good enough for a better than driver not quit show quality but nothing is broke or cut

I don't want to pull the wrong part and then you say i need this for my truck

I go to junk yards all over the country as a hobby because my job make me travel all over right now i am in denver co

09-28-2009, 07:57 PM	#1
BruthaMan US Army Veteran Join Date: Nov 2008 Location: Central Texas Posts: 1,049	WTB: 78-80 Aluminum Dash Insert Hey guys, been away for a while taking care of business. Kent and I are back working on the 78 project and making some great progress! I'm looking for a 78-80 aluminum dash insert piece. This is the aluminum piece that has the two areas cut out for the AC vents and the "Silverado" logo rests on it. I've been searching Ebay for the past six months for an NOS one. Have only seen two. One I was out of town when it ended and couldn't snag it and the other, recently, with an NOS dash bezel (that was the only one I've ever seen on Ebay...very rare!). So, who has some nice trim? Looking for a really nice piece. If you have a lead or one to sell, let me know. I have an aftermarket in place now and we'll probably mount the new dash later this week. Just really, really want to find a nice original piece. This is probably the most seen piece in the truck. Hook me up! __________________ 1972 C10 Highlander - The making of a daily driver

09-30-2009, 11:04 AM	#2
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: WTB: 78-80 Aluminum Dash Insert Have you checked LMC or Cheyenne Pick Up Parts? They are not the NOS, but I've seen a few of their inserts, and they look pretty good.

09-30-2009, 06:35 PM	#3
BruthaMan US Army Veteran Join Date: Nov 2008 Location: Central Texas Posts: 1,049	Re: WTB: 78-80 Aluminum Dash Insert Hey John. Yes, I have one of the aftermarkets now. The "real ones" are tough to find! __________________ 1972 C10 Highlander - The making of a daily driver

10-02-2009, 09:41 PM	#4
slugish Slugish Join Date: Jan 2005 Location: Earlysville, Va. Posts: 1,024	Re: WTB: 78-80 Aluminum Dash Insert 81 & up don't fit ??

10-03-2009, 06:04 AM	#5
Prong Registered User Join Date: May 2007 Location: CO Posts: 475	Re: WTB: 78-80 Aluminum Dash Insert Nope, the 81-up has a curve at the passenger side end.

10-07-2009, 10:35 PM	#6
USSkoval Registered User Join Date: Jul 2009 Location: West Jefferson, OH Posts: 999	Re: WTB: 78-80 Aluminum Dash Insert IIRC, I have a very nice trim piece, but it's ONLY the insert. The plastic portion was broken so I pulled the insert off of it.

10-07-2009, 10:46 PM	#7
BruthaMan US Army Veteran Join Date: Nov 2008 Location: Central Texas Posts: 1,049	Re: WTB: 78-80 Aluminum Dash Insert I called out a fabricator today to see about having a custom billet harness box cover (for the painless wiring) fabricated. I had the plastic aftermarket version and showed it to him to see if he could replicate it in billet. Supposed to give me a call tomorrow with a quote. The aftermarket billet ones wouldn't be so bad if they didn't cover up the ac outlets on the dash. __________________ 1972 C10 Highlander - The making of a daily driver

10-07-2009, 11:26 PM	#8
CreditGod Registered User Join Date: Dec 2008 Location: dallas, texas Posts: 90	Re: WTB: 78-80 Aluminum Dash Insert What options do you want on it i know where two are three are that look good enough for a better than driver not quit show quality but nothing is broke or cut I don't want to pull the wrong part and then you say i need this for my truck I go to junk yards all over the country as a hobby because my job make me travel all over right now i am in denver co

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.